Providing air conditioners and other allied works to the control room building at 220kV R/S Sedam.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Estimate for Providing air conditioners and other allied works to the control room building at 220kV R/S Sedam

Sl. No Particulars No L B D/H Qty Unit Qty Rate Rate inclusive of KKR @ 5% Amount

1 Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board. (a) 16A Three Way 5 Pin Socket KPWD SR 2023-24 (vol-6) 10/3.14.12 No 9 115

2 Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 3star, 1.5 Ton capacity KPWD SR 2023-24 (vol-6) 31/6.8.2 Each 9 45284

3 IInstallation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type KPWD SR 2023-24 (vol-6) 32/6.12 Each 9 3175

4 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 3KVA Capacity KPWD SR 2023-24 (vol-6) 38/9.1.1 Each 9 3995

5 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and out door unit Leak testing oil and gas charging for additional piping length of tube. KPWD SR 2023-24 (vol-6) 32/6.13.1 m 30 1549

6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (a) 4sqmm KPWD SR 2023-24 (vol-6) 5/2.3.4 m 63

7 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plate swith due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (a) 4-5Way KPWD SR 2023-24 (vol-6) 8/3.3.3 Each 9 137

8 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (a) 4 Module KPWD SR 2023-24 (vol-6) 8/3.5.3 Each 9 175

9 Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. KPWD SR 2023-24 (v-6) 2/1.2.1 m 66

10 Miscellaneous and Unforseen items LS 637.65

Information on works which are yet to be completed

(EXISTING COMMITMENTS AND ON-GOING WORKS)

Description of work Place & State Cotact No & date Name and address of Employer Value of contract Rs. Lakhs Stipulated period of completion Value of works remaining to be completed (Rs.Lakhs) Anticipated date of completion

Attach Certificate for each work indicated above, in Format 1, obtained from the Competent Authority

Countersigned by the Employer in charge TENDERER (Signature & Seal)

Information of the works for which Tenderer has submitted Tender

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

TENDERER (Signature & Seal)