PROVN OF SENTRY BOX ALONGWITH PATHWAY AT MAG SIKH LI REGT CENTRE AND PROV OF INTERLOCKING TILES IN FRONT OF KOTE AND SHED NEAR BLDG NO. P-21 AT SIKH LI REGT CENTRE.

Amount

M & L for surface dressing n.exc. 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for 75mm thick cement conc. type D-2 1:4:8 as in sub base complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape an size conforming to IS 15658-2006 of 80 mm thick of M-40 grade as in floors, using grey cement pigment and laid over 25 mm thick sand cushioning complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping & benching etc complete all as specified and directed.

M&L Rolled mild steel Fe-410-W(Gde-E-250) quality-A in rolled sections as in main and cross beams, hip and jack rafters,purlins,posts where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A ) complete all as specified and directed.

S&F tubular posts including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L for plain cement concrete in post hole Type B1 1:2:4 ( 20 mm graded aggregate) complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of steel surfaces over 10 cm in width or girth, not otherwise described ,complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

Excavating in trenches not exceeding 1.50M wide and not exceeding 1.50M depth for foundation etc or for shafts, wells, cess pits, manhole exc not exceeding 10 Sqm on plan and not exceeding 1.50M in depth and getting out in soft loose soil complete all as specified and directed.

Returning filling in including spreeding leveling watering and well ramming in layers n exc 25 CM complete all as specified and directed.

Filling under floors including spreading and levelling in layers n exc 25 Cm including well ramming and watering as required complete all as specified and directed.

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.50M above the startig point complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as flooring complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-1 aggregate as in plinth protection complete all as specified and directed.

M&L for broken stone or boulders hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface (broken stones) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6.complete all as specified and directed.

M&L for RCC M-25 Design mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, shelves complete all as specified and directed.

M&L for RCC M-25 Desig mix as in lintel, chajja/sunshades etc.complete all as specified and directed.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor sabs, landings, balconies, lintel, chajja, canopies, shelves n. exceeding 200mm thick complete all as specified and directed.

Material and labour for 5 mm thick rendering in CM (1:3) on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work complete all as specified.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 surface finished even and fair faces complete all as specified.

M&L for prep of new plastered surfaces & applying 3 coats of white wash as in ceilings complete all as specified and directed.

M&L for prep of new plastered surfaces of wall & applying 2 coats of OBD distemper over a coat of Chalk whitining as in walls complete all as specified and directed.

M&L for prep of new plastered surfaces & applying 2 coats of cement base paint over a coat of primer complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bend to shape required including cranking, bending, spirally for hooping ends and binding with mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

M/S WASEEM KHAN CONTRACTOR