Survey, Investigations, Design, Supply, Erection, Testing and Commissioning of 1) Lift-3 from Thangali tank to feed Ayyanakere and Belawadi tank series (Total 38 Nos) 2) Auxiliary lift -4 from Belavadi tank to feed 12 tanks and 3) Auxiliary lift -5 from Udharakatte kere to feed 27 tanks in Kadur, Chikamagalur and Arasikere Taluks under Stage-III of Tarikere Kadur Chikmagaluru Tank Filling Scheme

The intending bidder should have satisfactorily completed (at least 90% of the Contract Value) as a prime contractor at least one similar nature of work such as lift irrigation scheme/MS Pipe line work with lift/Water transmission projects with pumping station which includes MS/HDPE pipeline works etc including Supply, Laying of Bulk Water pipe with power supply arrangements Costing not less than Rs. 15598.89 Lakhs (usually not less than 50% of estimated value of contract) here value of contract implies final cost of work executed as per contract during last 5 years. An additional weightage of 10% each year will be added to the cost of work done to bring it to the 2024-25 price level. The work done certificate should be obtained from a competent authority not below the rank of Executive Engineer of the concerned division and countersigned by the Superintending Engineer of the concerned circle. If the bid is submitted as joint venture, then one partner of the JV should fully meet the PQ requirement of similar nature of work.

executed in any one year, the following minimum quantities of work during the last five years(usually 80% of the peak annual rate of construction Supply, laying, jointing and testing of MS pipes of diameter not less than 400 mm 74.00 kms Supply, laying, jointing and testing of HDPE pipes of diameter not less 200 mm 21.00 kms Reinforced Cement Concrete (M-20 and above) 8700.0 Cum Reinforcement steel bars for RCC works(Fe-500) 630.00 MT

The intending bidder (Individual/JV/Pump Tie up partner) should have supplied and succefully commissioned at least 3 nos of VT pumps with a capacity (flow rate) not less than 0.51 cumecs at a static head not less than 121.00 m for each pump during the last 5 years

The intending bidder should have executed Substation work/Transmission Line got executed through reputed CEIG Registered electrical contractor and should have executed substation work not less than 110kV with transformer not less than 4.5MVA in any one year Note If the bidder has not executed the above works listed, bidder should have got executed the work through reputed CEIG registered electrical contractor who has completed the above works in one year. A declaration shall be furnished in the Technical bid by the bidder and the intending electrical contractor to agree to carry out the work if the work is awarded to this bidder The successful bidder should furnish documents in support of the work done by CEIG registered electrical contractor as per the above criteria along with the bid The work done certificate should be obtained duly signed by an officer not below the rank of Executive Engineer of the concerned Division or equivalent in case of other Government undertaking (either directly to the Electrical Contractor or to the Main Contractor who in turn shall provide a certificate of having engaged the above Electrical Contractor for the said work

Each Tenderer should further demonstrate Availability by owning at least 50% of the required / specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease / hire basis for all works, provided the relevant documents (commitment agreements etc.) for availability for this work are furnished. Excavator own-3 and Hire-3, Concrete Mixer 0.5 Cum own-2 and Hire-2, Tippers 5 cum capacity own-3 and Hire-3, Water Tanker 8000 litres own-2 and Hire-2

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value of Rs. 31197.78 Lakhs. The available tender capacity will be calculated as under Assessed available tender capacity (AxNx1.5 - B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress N Number of years prescribed for completion of the works for which tenders are invited B Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 24 months (period of completion of the works for which Tenders are invited) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent Failure of bidder to comply with the requirement in Prescribe proforma for qualification information as per section 3, will constitute sufficient ground for rejection of the technical bid

The intending bidder should have in the last five years achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering construction works only) of Rs. 31197.78 Lakhs (usually not less than the estimated annual payments under this contract). If the bid is submitted as JV, then the PQ requirement of minimum financial turnover shall be considered on the basis of combined resources. The lead partner should have an annual financial turnover of not less than 50% of total turnover indicated above in any two years during last 5 years. All document/certificates issued by a Charted Accountant should have a UDIN (unique document Identification Number) generated through the ICAI (The Institute of chartered Accountants of India) Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document Note: Audited balance sheets and Turnover certificate duly certified by Chartered accountant with their unique document identification number (UDIN) generated by ICAI portal should be uploaded. Financial turnover of previous years will be given a weightage of 10% per year based on the rupee value to bring them to 2024-25 price levels.

The tenderer/firm/company shall furnish details of liquid assets and or availability of credit facilities of Rs. 7800.00 Lakhs for the work mentioned above for meeting the required funds in the form of credit lines / line of credit / certificate from Scheduled commercial Bank (usually the equivalent of the estimated cash flow for three months in the peak construction period).