Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical VARANASI | VARANASI | UTTAR PRADESH | Accepted-Technical Accepted |
| 2 | Accepted-Technical | Accepted-Technical Accepted |
| 3 | Accepted-Technical | Accepted-Technical Accepted |
Tender Value
₹29.1 L
EMD Value
₹69,000
Closing Date
8 Apr 2026, 6:00 pmClosed
Executive Engineer (East), UPSRTC, Lucknow
Executive Engineer (East), UPSRTC, H. Q Lucknow
Repair of shed ,Room and Yard for Electric Bus Charging at DWS Kidwai Nagar Kanpur.
2026_UPSRT_1131843_1
316/B/DA/E/2026
Open Tender
Civil Works
Percentage
90 days
Kidwai Nagar Kanpur.
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
Executive Engineer (East), UPSRTC, Lucknow
₹69,000
16 Apr 2026
30 Mar 2026
9 Apr 2026
30 Mar 2026
8 Apr 2026
30 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Dismentling of B.O.E soling /interlocking tiles including staking of serviciable material and disposal of unservicable material with in a lead of 50 m as per direction of E/I . (Labour Only) | |||||
| 2Relaying of BOE paving laid dry joints sand filled including preparation of base proper slop and its ramming complete. ( labour Rate of SI No.615) | |||||
| 3Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.DSR 2.27 | |||||
| 4Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. DSR 11.2 | |||||
| 5Dismantling of girders,trusses and other steel work including staking of dismenteled material as per directed by Engineer in charge within 60 metres complete | |||||
| 6Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1 G.S. Sheet | |||||
| 7Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR 2023 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² | |||||
| 8Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 12.5.1 1.60 mm thick with zinc coating not less than 350 gm/m² | |||||
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 2023 15.7.4 In cement mortar | 1 | Cum | - | - |
| 10Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR 15.56 | |||||
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
BOQ_2112167.xls
BOQ • 4.65 MB
Tender_dockid.pdf
Tender Documents • 0.98 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .