COMPREHENSIVE REPAIRS / REPLACEMENT TO SECURITY LIGHT, STREET LIGHTS, GATE LIGHTS, GARDAN LIGHTS, HIGH MAST LIGHTS AND MISC WORKS IN ARMY AREA AT UDAIPUR MIL STN

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 m in depth in a Hard soil for laying underground cables/ errection of steel tubular poles / stay pit etc all as directed by Engr-in-charge.

Material & Labour for sand cushioning the UG cable screened unwashed river sand and punning for cushioning to cable all as directed.

Supply and laying reinforced precast concrete cable cover, class LV, type 2 flat, size 300mm x 180mm x 40mm

Returning, filling in incl spreading,levelling watering and well ramming in layer n exc .25 cm in soil each layer complete specified and directed by Engr-in-Charge.

Removing excavated surplus material to a distance n.exc 50 m and depostimg where directed at alevel n exc. 1.5 m above the starting point in any type of soil complete all as specified and directed by Engr-in-Charge.

Supply & Laying including removal of old and unsv UG cable and connection, testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 6 sqmm 2 core all as directed by Engr-in-charge.

Supply & Laying including removal of old and unsv UG cable and connection, testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 10 sqmm 4 core all as directed by Engr-in-charge.

Supply & Laying including removal of old and unsv UG cable and connection, testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 25 sqmm 3.5 core all as directed by Engr-in-charge.

Supply & Laying including removal of old and unsv UG cable and connection, testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 70 sqmm 3.5 core all as directed by Engr-in-charge.

Supply & Laying including removal of old and unsv UG cable and connection, testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 95 sqmm 3.5 core all as directed by Engr-in-charge.

Taking down carefully aluminium LT conductor from overhead pole for taking as sch of credit.

Supply and fixing inreplacement of GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 4 Nos with nut and bolt and washers including connecting complete including of suitable length as per direction and approved by Engr-in-charge,

Supply and fixing lugs of rating 1100 volts of following sizes suitable for fixing on LT UG Cable:-

(a) 6 Sqmm

(b) 10 Sqmm

(c) 25 Sqmm

(d) 70 Sqmm

(e) 95 Sqmm

Supply and fixing in replacement of LED Flood lights die cast aluminium corrosion resistant covered with toughned glass IP rating 65/66 ,power factor :>0.98 , THD <10% of wattage 150 watts , 100lm-120lm chip efficacy ; as per spcification operating voltage 90-300V/50HZ,CCt : 5700K-6500K with 1.5 mtr 1.5 sqmm 3 core with surge protection with complete accesories all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of FTL to decorative post top 360 degree indirect light IP-65 ptotection, corrosion ressistat glare free lantern fitting 35/36 W LED complete set including LED lamp intigrated.

Supply, replace, testing and commisioning of LED street lights including providing of two core cable from poles to street light of length as required on the same pole with fittings having system of 45 watt all as directed by Engr-in-charge.

Supply, replace, testing and commisioning of LED street lights including providing of two core cable from poles to street light of length as required on the same pole with fittings having system of 70 watt all as directed by Engr-in-charge. Note : Hydraulic ladder will required for fixing the street light on LT pole. The rate for Supply and fixing street lights and hydraulic ladder are including in this item. No extra payment will made against hydraulic ladder.

Supply and fixing in replacement of LED Bollard 10 Watt LED fitting energy saving long life aesthetically designed metal body cone bollard with required nut, bolt, washer all as specified and directed of Jaquar Cat Part No OBL-GRY-LBLDCON010XW or its equivalent.

Supply and fixing in replacement of garden light ground burial type fitting LED 12 watt complete set including LED lamp integrated, of make Corompton Cat Part No HPLLEDG11260 or its equivaalent.

Supply and laying in trencehs or fixing on pole of PVC pipe of dia 20mm for protection of cable PVC insulated aluminium conductor, served with innernsheathing of PVC tape and overall PVC sheathed in service connections including 4mm suspension wire, one twin core cable flat or circular.

Taking down old unsv bus bars, and supply, install, testing & commissioning of bus bar chamber of size 60 cm x 60cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer complete all as specified and directed by Engineer-in-Charge. The panel board shall be comprising of the following accessories

(a) Copper bus bar cap 250 Amp - 04

(d) RYB neon indicating lamp set of three- 01

Note : (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel. (iii) Danger notice plate (02 Nos) LT size 20cm x 15cm shall be fixed on the panel. (iv) Contractor provided power coated finish paint on panel.

Taking down old unsv bus bars, and supply, install, testing & commissioning of bus bar chamber of size 60 cm x 60cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer complete all as specified and directed by Engineer-in-Charge. The panel board shall be comprising of the following accessories

(a) MCCB 63 Amp TPN - 01 Nos

(b) Copper bus bar cap 250 Amp - 04

(e) RYB neon indicating lamp set of three- 01

Note : (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel. (iii) Danger notice plate (02 Nos) LT size 20cm x 15cm shall be fixed on the panel. (iv) Contractor provided power coated finish paint on panel.

Material & Labour for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for making cubical type basement/coping for fixing of LED bollard type lights with nut, bolts, washers etc, including necessary form work finishing even and smooth without using extra cement , all as specified and directed.

Supply and fixing SMC junction box with bus bar suitable for connection (Incoming / outgoing) of three phase & neutral and 1 x MCB SP on the LT electric pole of rectangular or circular shape as existing at a height of in between 1-1.4 mtr with nut, bolt, washer etc. (Make : Syntex or equivalent).

Supply, fixing, installation and testing inreplacement of Battery 150AH, 12 Volt with terminal including wiring for connection of all batteries with existing size and core and to be connected with existing roof top Solar system of 10 KVA capcity.

Material & Labour for repair and repalcement of roof top Solar system of 10 KVA capcity for complete Inverter system check and making connection, testing for smooth smooth incoming / outgoing power supply automatically including changing of 01 x Relay and 01 x 415 V Main card IC.

Supply, fixing, installation, commissioning and testing of vaccum interrupter bottle (Ser No. WL-34599 M3+) for VCB breaker of capacity 11KV with drive rod insulator, copper rod, nut, bolts, washer etc and all coonected items all as speccified. (Make : Crompton greaves only.)

Taking down Old unsv LED Street lights of any size and supply & fixing LED lights of “Lithium based energy efficient Integrated solar street light of 40Watt” in single FRP body with duly polyurethane coating (Camouflage color), encases with monocrystalline solar PV Panel of 90/95Wp , lithium battery 11.1/12.8V, 44.0AH with inbuilt BMS, IP 65, high brightness W-LED(160-180lm/watt) lamp with aluminum reflector for better light distribution , CRI >70, Color temperature 5700K - 6500K, microcontroller based charge controller cum driver, automatic dimming function (first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10C to (+)55C, weight not more than 18-20kg with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm should provide Vital Parameters Test report from NABL accredited lab and should be of made in India with CE & ROHS compliant. (Make : AXXON or equivalent)

Taking Down old LED Street lights and Supply of “Lithium based Energy Efficient Integrated Solar Decorative Street Light 32Watt” in Single FRP body, encases with Flexible Mono-crystalline Solar PV Panel of 65Wp , Lithium Battery 11.1/12.8V, 33.0AH with inbuilt BMS, IP 65, High brightness W-LED (160-180lm/watt) lamp with optical Lens for better light distribution , CRI >80, Color Temperature 5700K-6500K. Microcontroller based charge controller cum driver, automatic dimming function ( first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, LUX Output 25-35 (from 5/6 mtr height),working temperature: (-) 10C to (+)55C, weight 08-10kg etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. (Make: AXXON or equivalent).

Supply and laying inreplacement of GI tubing 80 mm dia socket ends, Class B light grade including all fittings and accessories, in any length, laid in trenches fixed on ground / pedestal and making good disturbed ground/pedestal.

Supply and laying inGI tubing 40 mm dia socket ends, Class B light grade including all fittings and accessories, in any length, laid in trenches fixed on ground / pedestal and making good disturbed ground/pedestal.

Supply and fixing in replacement of old unserviceable timer switch/MCB SPN with timer switch SWADEEP-02EC 5KW 3P (Nature switch-02+ contactor-25 amps per pole (2 pole bridged + MCB-40 Amps etc) housed in pole mounted enclouser) automatic switching ON at sunset and automatic OFF at Sunrise, operating voltage range: 150-300 VAC, automatic over voltage sense, trip and latch. Immunity to dust, bird sittings and cloud cover, immunity to moon and other street lights. Degree of protection confirms to IP65, completefixed to pole/panel with suitable arrangement all as directed by Engr-in-charge. (Make :-Swadeep or equivelent)

Supply and fixing in replacement of old unserviceable timer switch/MCB SPN with timer switch SWADEEP-02EC 5KW 3P (Nature switch-02+ contactor-25 amps per pole (2 pole bridged + MCB-40 Amps etc) housed in pole mounted enclouser) automatic switching ON at sunset and automatic OFF at Sunrise, operating voltage range: 150-300 VAC, automatic over voltage sense, trip and latch. Immunity to dust, bird sittings and cloud cover, immunity to moon and other street lights. Degree of protection confirms to IP65, completefixed to pole/panel with suitable arrangement all as directed by Engr-in-charge. (Make :-Swadeep or equivelent)

Material & Labour for cold mix emulsion granules road patching material in making good of road 40mm thick.

shree nathji trading corporation (BID ID -3086331)