Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC NO 16 TULASA NIWAS GANESH NAGAR SAMBRA BELAGAVI 591124 | BELAGAVI | BELAGAVI | KARNATAKA | 591124 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.8 L+₹4.5 L (12.7%)Rejected-Finance BHAGIRATHI 59 10 PIPELINE ROAD VIJAYNAGAR BELGAUM 591 108 | BELGAUM | BELGAUM | KARNATAKA | 591108 | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹42.5 L+₹7.2 L (20.3%)Rejected-Finance | L3 | Rejected-Finance Third lowest | |
| 4 | L4₹44.4 L+₹9.1 L (25.7%)Rejected-Finance | L4 | Rejected-Finance Fourth lowest | |
| 5 | L5₹44.9 L+₹9.6 L (27.1%)Rejected-Finance | L5 | Rejected-Finance Fifth lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
24 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIR TO ROOF, JOINERY, PLASTERING ETC. IN NORTH CAMP, MES COLONY AT ATS BELAGAVI
2024_MES_648753_1
GE(AF)/SAM/TOK-10 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹1 L
Yes
7 Jun 2024
1 Apr 2024
26 Apr 2024
1 Apr 2024
24 Apr 2024
19 Apr 2024
Amount
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and metal frame work complete all as specified and directed
Taking down cement plaster of any thickness from stone/brick/concrete/RCC wall/ceiling surfaces including raking out joint, hacking for key, scrubbing down with water etc. complete all as specified and directed
Dismantling of wall/ floor/dado, hearth or wall tiling or terrazo cement concrete tiling including cement mortar bedding of any thickness (but not backing) complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and pavings of any grade of mix not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed
Demolition of cement concrete (unreinforced) of any description of any grade of mix and in any position not otherwise specifically provided for complete all as specified and directed
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Dismantling asbestos cement/steel (Corrugated, semi corrugated, etc) sheets in roof coverings including ridges complete all as specified and directed
Dismantling RCC posts or struts ( steel , RCC) any section including taking down embedded portion from concrete, brick work, masonary etc. and making good disturbed ground complete all as specified and directed
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 0f 75/110mm dia bore complete in all respect complete all as specified and directed
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sq. m each including making good to match adjoining surfaces complete all as specified and directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) including making good using plaster and PCC as required complete all as specified and directed.
Taking down Chowkhats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames) including making good using plaster and PCC as required complete all as specified and directed.
Dismantling water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs complete all as specified and directed.
Dismantling water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs complete all as specified and directed.
M&L for cleaning and removing of all scale and dirt etc., cleaning mouth of circulating pipes, using 70gm of bleaching powder per tank from water storage tank of capacity from 500 litres but not exc. 1000 litres each, after taking down by disconnecting of outlet pipe and re-connecting in the same position after cleaning and marked on tank with white synthetic enamel paint as " tank cleaned on ________(date)" using stencil complete all as specified and directed
Providing and laying water proofing treatment over RCC roof surface as per following specification including taking down old treatment complete all as specified and directed. :- (i) preparation of existing roof surface and plastering 15mm thick cement mortar 1:4 finished even & smooth. (ii) applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per Sqm (in two coats) without leaving the pores/voids (iii) applying primer @ 0.30 liter per Sqm in two coats over concrete / plastered surface (iv) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) forced application with the fire torch
S&F Gl frame work of size 605X605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid exposed metal frame complete all as specified and directed.
M&L for cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping including necessary form work and exposed surface of concrete shall be finished even and smooth without using extra cement complete all as specified and directed.
M&L for hardcore with broken stone or boulders gauge not exceeding 63 mm size deposited spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface complete all as specified and directed
M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregates) as in sub base to floor complete all as specified and directed
M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantalling of existing paver block laid dry complete all as specified and directed.
Supply only liquid water proofing compound all as specified and directed
M&L for pre-cast cement concrete 1:3:6 type C1 (using 20 mm graded stone agrregates) as in solid block masonary exc 10cm width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:6 including demolition of existing masonary work complete all as specified & directed
M&L for rendering 15 mm thick cement mortar 1:6 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed
M&L for rendering 15 mm thick cement mortar 1:4 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed
M&L for rendering 10 mm thick cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed
M&L for Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in 25mm thick levelling course/sub base under floor complete all as specified and directed.
S&F in repair bib tap fancy type 15mm bore dia long body chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete complete all as specified and directed.
Supplying and laying in replacement CPVC pipes SDR 1, 20mm nominal size including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of concealed nature and their making good complete all as specified and directed.
Supplying and laying in replacement CPVC pipes SDR 11, 25mm nominal size including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of concealed nature and their making good complete all as specified and directed.
S&F in repairs bib tap fancy type 15mm bore dia, short body chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed. Make: Jaquar (Cat Part No. APR-101037), Cera (Cat Part No. F101315 or equivalent Cat Part in Hindware, Parryware
S&F in repairs CPVC, globe or gate valves, 25mm nominal bore dia connected with pipe with solvent of any material complete all as specified & directed.
S&F PVC (SWR) pipes single socketed, 75mm bore dia, in any length with rubber ring joints, fixed to wall with necessary mild steel clamps of suitable size complete all as specified and directed. .
S&F PVC (SWR) pipes single socketed, 75mm bore dia, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, 110mm bore dia, in any length with rubber ring joints, fixed to wall with necessary mild steel clamps of suitable size complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, 110mm dia in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
S&F PVC (SWR) floor trap of outlet dia 75mm, plain with SS gratings 125X125mm size with openable circular grating with or without hole including jointing with solvent cement including fixing to pipe properly with solvent complete all as specified and directed. Make: Astral, Prince, Finolex
S&F PVC (SWR) bends with access door for 75 mm bore pipe complete all as specified and directed. . Make: Astral, Prince, Finolex
S&F PVC (SWR) bends with access door for 110 mm bore pipe complete all as specified and directed. .Make: Astral, Prince, Finolex
S&F PVC (SWR) junction single, (Single T) equal or unequal size with access door for 75 mm bore pipe complete all as specified and directed. . Make: Astral, Prince, Finolex
S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe complete all as specified and directed. . Make: Astral, Prince, Finolex
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed. . Make: Astral, Prince, Finolex
S&F PVC (SWR) vent cowl 75 mm dia complete all as specified & directed.Make: Astral, Prince, Finolex
M&L for Coloured glazed ceramic tiles of size exceeding 0.09 sqm but not exceeding 0.18 sqm in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed
M&L for non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over and including cement screed bed 15 mm thick cement mortar screed bed in 1:6 complete all as specified and directed
M&L for light shade Vitrified Ceramic tiles, double charged, 8mm to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slury laid over & including cement screed bed 15 mm thick cement mortar 1:6 complete all as specified and directed
M&L for light shade Vitrified Ceramic tiles, double charged, 8m to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slury laid over & including 10mm thick cement mortar backing in 1:4 complete all as specified and directed
M&L for machine cut Cudappah stone slab 20mm to 25mm thick in vertical/horizontal position, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed
M&L for Rolled mild steel any type/size sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors and door frames; fixed with angle cleats or other connecting plates of Fe 290 (Gde E-165) complete all as specified and directed
S&F mild steel flat as in wind ties for roofing including securing bolts confirming to Fe -290 Gde E-165 complete all as specified and directed.
S&F prepainted Galvalume Aluminium Zinc coating GI based trazoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
S&F 1.00mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , size design as per site complete all as specified and directed.
S&F Galvanised iron wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified & directed
S&F frame size 45X85mm, Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
All as per Srl item No.56 above but size of frame 65mmX125mm
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
M&L for 16mm to18mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed. .
S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars (fancy design as directed), plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 throgh hold fast/fastners etc. including necessary PCC in hold fasts complete all as specified and directed.
S&F to chowkats 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. Make: Rajshri Plastiwood or equivalent approved make
S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing each other complete all as specified and directed. . Make: Jindal, Hindalco
S&F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick dark black tint plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20798 (b) Main Frame top & sides section : Jindal section No 20678 (c) Sliding shutter section (handle ) : Jindal section No 20707 (d) Sliding shutter section for top & bottom : Jindal section No 20842 (e) Sliding shutter section for interlock : Jindal section No 21091 Make: Jindal, Hindalco
S&F Aluminium window and ventilator shutters/ louvered section powder coated (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections of not less than 60mm width & 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, peg stays 150mm long (1 no. per window), hinges 100mm long (2/3 nos.) suitable handle (1 no.) complete all as specified & directed. Make: Jindal, Hindalco
S&F powder coated grill (minimum thickness of powder coating 50 micron) aluminium section of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium section of standard section around the opening complete all as specified and directed.
S&F area of each window not exceeded 2 Sqm for Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (90mm x 42.5mm), sliding sash (54mm x 32mm). Sliding mesh Sash (54mm x 32mm) Sliding interlock (One vertical length in each shutters) (30mm x 35.50mm), Glazing bead (22mm x 14.5mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (18mm x 10mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.
S&F 4.8mm thick dark black tinted sheet glass, ordinary quality, in squares, pane in UPVC/Al window sections complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint duly filled the voids with enamel based putty including one coat of red oxide primer complete all as specified and directed. .
S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F Aluminium anodised, barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.
S&F Aluminium handles, cast type, anodised 150 mm long complete all as specified and directed.
S&F Butt hinges 100 mm size, medium weight, stainless steel complete all as specified and directed.
S&F figured glass 4 mm thick, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.
S&F ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete in mild steel fixed to MS frame or wooden framed complete all as specified and directed.
S&F floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring overall length of cover plate140 mm, fixed in floor complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws in wooden or UPVC window/doors complete all as specified
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws in wooden or UPVC window/doors complete all as specified and directed.
Taking down of glass from wooden/steel and S&F 4mm thick sheet glass including new glazing pins, glass putty, wooden beading for fixing glass complete all as specified and directed.
Taking down of existing toughned glass and S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.
M&L for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfaces of walls complete all as specified and directed.
M&L for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including preparation of old decorated surface of walls complete as specified and directed .
M&L for preparation of new un decorated wall surface and applying two coat of oil bound distemper over 3mm thick layer of putty finished smooth surfaces including priming coat complete all as specified and directed
M&L for complete removal of existing treatment of old decorated wall surface and applying two coats of oil bound distemper over 3mm thick layer of putty finished smooth surfaces including priming coat complete all as specified and directed
M&L for for preparation of old decorated wall surface and applying two coats of oil bound distemper finished smooth surfaces complete all as specified and directed
M&L for preparation of new plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed
M&L for preparation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed
S&F in replacement rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) three layered wall construction, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia complete all as specified and directed
S&F in replacement rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) three layered wall construction, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia complete all as specified and directed
S&F in repairs 15mm bore dia fancy angle stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed. .
S&F in repairs PVC tank cover including fittings for fixing of cover to tank and locking arrangement suitable for 500 to 1000 ltr capacity of PVC water tank complete all as specified and directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC flush down pipe with bend short or long complete all as specified and directed
S&F in repairs towel rail 600mm long chromium plated fixed with and including Chromium pated brass screws complete all as specified and directed.
S&F wall mounted Sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 300mmx300mm with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs Alumimium Hat pegs, solid body, 125mm to 175 mm in length complete all as specified and directed.
S&F in repairs of Soap dish, any type, fixed to plugs with brass chromimum plated fixed with brass screws complete all as specified and directed
S&F in repairs Stainless Steel curtain rails 25mm dia decorative type including end brackets and knobs complete all as specified and directed.
M/s S N Atiwadkar
RAJENDRA KRISHNA SARAF
SAMARTH ASSOCIATES
M/S ADITYA CONSTRUCTIONS
Vinod Enterprises
M/S. ADARSH ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .