REPAIR REPLACEMENT OF TRUSS PURLIN ROOF SHEETING BRICKWORK VENTILATOR PLASTERING PLINTH PROTECTION FLOORING ETC IN OLD AREA INSIDE COD UNDER AGE BR I OF GE I KANPUR

Amount

BnR Schedule

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facing etc including stacking the serviceable materials and disposal of unserviceable material, debris and disposal of rubbish outside MD land .complete all as specified and directed.

M & L brickwork with flyash bricks, old size straight or curved on plan exc 6m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

All as per item no. 03 here in before but except bricks.

Dismantiling of AC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F of regular modified Polyester colour coated galvanized steel rib profile sheet(TCT) 0.50mm thick E42(inclusive of protective coating ) overall width 1060mm and total mass coating of 120 gms/sqm on both sides as per IS-14246:95(JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers more than 3.00sqm patches as required in shapes complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (JSW) (g) Everest Industries

S & F regular modified Polyester colour coated galvanized steel plain profile sheet(TCT) 0.50mm thick E42 (inclusive of protective coating ) as in ridge , valley, gutter and total mass coating of 150 gms/sqm on both sides as per IS-14246:95(JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (JSW) (g) Everest Industries

Fixing only old serviceable 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts.

Taking down chowkhats or framed ventilator (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all asspecified and directed.

S & F mild steel rolled section of angle, tee or other section Fe-290 Gde E-165) as in framing for cladding, glazing, ventilator and the like fixed with angle cleats and connecting plates etc complete all as specified and directed .

S & F steel wire fabric not exc. 4 kg/ sqm in wood or steel members etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

S & F Providing precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and set in cement mortar (1:4) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders(for stone walling).corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers,weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed . Note: Reinforcement shall be measured and paid separately.

M&L for mild steel TMT 10mm dia & over, cut to length bent to shape required including binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed .

Dismantling structural steel work including doors, gates but including framed truss etc complete all as specified and directed .

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E- 250) quality- 'A' complete all as specified and as directed.

S & F mild steel chequered plates as in steps of stair case, square cut or notched (ordinary and counter sunk) forming holes, with riveted , bolted or welded atachment confirming to Fe 410 W (grade E 250 quality 'B') complete all as specified and directed.Note : Work shall be executed in watch tower of height upto 12 meter.

Taking down cement plaster on bricks or concrete surfaces including raking out joints for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1 : 6 on fair faces of brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1 : 4 on other than fair faces of brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L Applying two coats of cement base paint over a coat of cement primer including preparation of newly plastered untreated surface of wall complete all as specified and directed.

S & F mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item no 23 above but refixing old wind tie (Old wind tie retrieved from taking down AC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings )

Dismantiling of CGI/PGI sheets any thickness as in roof coverings complete all as specified and directed.

S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with zinc coating 120 gram/sqm two corrugations side lap & 150 mm end lap ,fixed with 'L' type or 'J'type or crancked hook bolt and washers or with self drilling zinc aluminium coated metal screws of suitable size having cap with rubber washers as in roof covering/vertical surfaces complete all as specified and directed.(Make - SAIL/TISCO/RINL/JSW Steel Ltd)

All as per item No. 25 here in before except sheet.(sheet retrieved from item no 26 shall be reused.

S & F 0.63 mm thick PGI sheeting of class -VIII as in ridges, hips, wall cladding and straight flashings etc ,fixed with 'L' type or 'J'type or crancked hook bolt and washers or with self drilling zinc aluminium coated metal screws of suitable size having cap with rubber washers as in roof covering/vertical surfaces complete all as specified and directed.(Make - SAIL/TISCO/RINL/JSW Steel Ltd)

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as specified and dorected.

Taking down roof trusses, coupled rafters or trussed beams above 12 metres and upto 15 metres complete all as specified and directed.

S & F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, and watch tower structure rails fastenings and heavy bracket frames beam, tee, channel or flat sections including distance pieces, cleats etc. and similar work confirming to Fe-410 Gde E-250 quality A complete all as specified and directed at site.

Note: No electricity will be provided by the department and contractor will make his own arrangement of Generator set for truss work and other works for which electrcity be required such as welding , notching, cutting, grinding etc.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of cement oncrete in ground floor and pavings not exc 20cm thickness below or above ground level and disposal of unserviceable material, debris and disposal of rubbish outside MD land .complete all as specified and directed.

M & L 100 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base finished even and rough to receive floor topping complete all as specified and directed.

M & L 100 mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregate) for flooring surface finished even and smooth without using extra cement laid as in alternate bay complete all as specified and directed.

M & L 75 mm thick PCC type C-1, 1:3:6 (20mm graded stone aggregate) for plinth protection surface finished even and smooth without using extra cement complete and joints filled with hot bitumen 85/25 grade and sand in 1:3 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Demolition of cement concrete in any position, roof above ground level and disposal of unserviceable material, debris and disposal of rubbish outside MD land .complete all as specified and directed.

M&L for plain cement concrete type B0 (1:2:4 ) using 12.5 mm graded stone aggregate as in coping, roof kerb incl hunching, benchingcovering rounded or chamfered angles incl formwork complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not exc 10 cm in width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Note for all items of BOQ: Entire work listed in BOQ shall be executed in Restricted area.

jayanti associates

ARORA BROTHERS

M/s raj constructions

PANKAJ AND BROTHERS