CERTAIN B/R REPAIRS IN HANGERS ANNEXIES AND ASSOCIATED BUILDING IN TECH AREA AT AIR FORCE PATHANKOT

Amount

Taking down Doors chowkat or frame exc 1.5 Sqm but not exc 4 sqm but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and directed by Engr-in-Charge

Supply & Fixing Pressed steel frames for doors size 105 mm X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and directed by Engr-in-Charge

Material & Labour PCC type B0, 1:2:4 (12.5 mm graded crushed stone aggregate) filling in door and frames, any size, single or double rebated, including arrangements Complete all as specified and directed by Engr-in-Charge

Material & Labour applying one coat of black bituminus paint on Surfaces of any description wood,steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth complete all as specified and directed by Engr-in-Charge

Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixin gwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-Charge

Supply & Fixing SS Hinges 100 mm Long welded to Pressed steel door chowkhats complete all as specified and directed by Engr In Charge

Material & Labour preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

Supply & Fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long in repairs complete all as specified and directed by Engr-in-Charge

Supply & Fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed by Engr-in-Charge

Supply & Fixing Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed by Engr-in-Charge

Supply & Fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long.in repairs complete all as specified and directed by Engr-in-Charge

Material & Labour preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed by Engr-in-Charge

Material & Labour preparation of old treated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

Taking down steel/wooden ventilators chowkat or frames exc 1.5 Sqm but n exc 4 Sqm each. but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge

Taking down steel/wooden ventilators chowkat or frames n.exc 1.5 Sqm each. but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge

Supply and Fixing of Aluminium handles, cast type, anodised 150mm long complete all as specified and directed by Engr-in-Charge

Supply and Fixing of Aluminium handles, cast type, anodised 150mm long in repairs complete all as specified and directed by Engr-in-Charge

Supply and Fixing of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor in repair complete all as specified and directed by Engr-in-Charge

Supply and fixing of factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including figured glass, pin herd type and glazing with oil putty in squares-exc 05 sqm in each pane complete all as specified and directed by Engr-in-Charge. Note:- For uPVC frame, sash and multion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra pyament on this account shall be made.

Supply and Fixing fancy type CP bib taps, 15 mm bore with crutch or , screwed down, fixed as in repairs complete all as specified and directed by Engr-in-Charge

Supply and Fixing CP Pillar taps 15 mm dia, fancy type, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed In repairs complete all as specified and directed by Engr-in-Charge

Supply and Fixing stop valves chromium plated 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed as in repairs complete all as specified and directed by Engr-in-Charge

Supply and Fixing in repairs at Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixedcomplete all as specified and directed by Engr-in-Charge

Supply and Fixing size Soap dish of size 160x100x90mm fixed to plugs with chromium plated brass screws.in repairs complete all as specified and directed by Engr-in-Charge

Repairs Vitreous China half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe and complete connecting items as per existing complete all as specified and directed by Engr-in-Charge

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc 250 Ltr and up to 500 Ltr.

Supply and Fixing PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.in repairs complete all as specified and directed by Engr-in-Charge

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.

Material and Labour for 15 to 18 mm thick Granite(of any type) work (table rubbed, moulded and polished) in cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment with hole for gas pipe line complete all as specified and directed by Engr-in-Charge

Supply and Fixing Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck bedding layer in CM 1:4 complete all as specified and directed by Engr-in-Charge

Supply and Fixingfor Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) as skirting area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thck screed bed in CM 1:3 complete all as specified and directed by Engr-in-Charge

Material and Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

Supply & Fixing for coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:3 complete all as specified and directed by Engr-in-Charge

Material & Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 25 MM thick bedding layer in PCC 1:2:4 Type B1 complete all as specified and directed by Engr-in-Charge

Material & Labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade complete all as specified and directed by Engr-in-Charge

Taking down roof trusses, coupled rafters or trussed beams exc 4 mtr upto 8 mtr complete all as specified and directed by Engr-in-Charge

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed by Engr-in-Charge

Dismantling false ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Anodised aluminium/GI snap grid frame work for false ceiling . using Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous of 8 mm thick material reinforced with cellulose fibre for fixing in 600mm x 600mm grid, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 6mm dia GI bar hanged from the purlins of the roof and binded properly complete and all as specified and directed by Engineer-in-Charge.

Supply & Fixing for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing rolled MS section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W quality B complete and all as specified and directed by Engineer-in-Charge.

Supply and fixing MS plate 6 to 8mm thick plain, cut to shape forming holes and welded to truss and verticle post all as required, complete confirming to Fe 410-W(Gde- 250)quality-B complete and all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-Charge

Material & Labour 0.8 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed by Engr-in-Charge

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge

Supply & Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of camouflage colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings upto the height of 12 Mtr complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap inr, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.as desired roled shape for the hangar roof upto the height of 16 Mtr including leveling the wall top for smooth laying of CGI sheet and filling the corrogation portion gaps with 1:3 CM complete all as specified and directed by Engr-in-Charge

Material and Labour for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. before painting the CGI sheet complete all as specified and directed by Engr-in-Charge

Demolition of reinforced Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspendedwork complete all as specified and directed by Engr-in-Charge.

Material & Labour Reinforced cement concrete (nominal mix) type B1 1:2:4 in chajjas complete all as specified and directed by Engr-in-Charge

Material & Labour Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat surface complete all as specified and directed by Engr-in-Charge

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key,scrubbing down with water to receive plaster,.

Material & Labour for rendering 15 mm thick over 10 mm thick CM 1:6 on the surfaces of brick or concrete finishing fair and even without using extra cement. With water proofing compound all as directed by Engr-In-Charge (water proofing compound will be measured and paid saperatly)

Material & Labour preperation of newely plastered surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge

Material & Labour for rendering 5 mm thick in CM 1:3 on ceiling to be finished complete all as directed by Engr-In-Charge

Preparation of new ceiling surface and applying two coat of white wash complete all as specified and directed by Engr-in-Charge

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and directed by Engr-in-Charge

Material & Labour for preparation of plastered or un plastered old decorated surfaces of walls, removal of nails etc & filling cracks/hole by Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. Distempering with 1st quality acrylic distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour in two coats complete, as per manufacturer's specification complete all as specified & directed by Engineer-in-Charge.

Material & Labour for Complete removal of existing treatment of walls, removal of nails etc & filling cracks/hole by Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. Distempering with 1st quality acrylic distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour in two coats complete, as per manufacturer's specification. by auto roller complete all as specified & directed by Engineer-in-Charge.

Material & Labour for Complete removal of existing treatment of walls, removal of nails etc & filling cracks/hole by Providing and applying plaster of paris putty Distempering with 1st quality acrylic distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour in two coats complete, as per manufacturer's specification. by auto roller complete all as specified & directed by Engineer-in-Charge.

Material & Labour for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and Material & Labour for applying Finishing walls with Premium Acrylic Smooth exterior paint camouflage pattern with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed by the Engr-in-Charge.

Supply of integral water proofing compound complete all as specified and as directed by the Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete and all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified

Material & Labour Brick work with sub class 'B' brick old size straight or curved on plan built in cement mortar 1:6 complete and all as specified and directed by Engineer-in-Charge.

Material & Labour Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 (Except Brick)complete and all as specified and directed by Engineer-in-Charge.

Supply and fix Aluminum composite pannel 4 mm thick as in sash of the bottom portion of UPVC doors complete all as specified and directed by Engr In Charge.

Removing of AC outdoor unit from the existing position and fixing at the location as instructed by the Engr in charge including all cutting drilling fixing and brass pipes as required at site and making the surface as previous. Complete all as specified and directed by engr in Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge

Material & Labour for 100mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as subbase for hard standing complete all as specified and directed by Engr-in-Charge

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by engr in Charge.

Supply & Fixing Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of Aluminium Extruded section body and fixed complete all as specified and directed by Engr In Charge.

Surya & Gautam Builders (BID ID -3062369)

pardeep singh marwaha (BID ID -3062680)

M/S G P MARWAHA (BID ID -3062501)

PARVINDER BHARDWAJ (BID ID -3062647)

M/S SINGH AND ASSOCIATES (BID ID -3062514)

new hi tech engineers and contractors (BID ID -3062726)

kewal builders (BID ID -3062667)