Vidhayak Niwas-4, Royal Hotel sthit Aawas No. 11-12 Me modular kitchen banane ka karya, avem do bathroom ke navinikaran ka karya, avem aawas me UPVC ki khidkiyan lagane ka karya avem anya civil sambandhi karya

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.DAR NO-15.3

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,architrave , holdfasts etc. complete and stacking with in 50 metres lead : Of area beyond 3 sq. metres DAR NO-15.12.2

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Three track three panels sliding window with two glazed & we wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).9.147.A4.1

Fixed window / ventilator without mullion / transom. Using R4 series with frame (64 mm & above) x (50 mm & above). (Height above 2.5 metre) DAR NO-9.147.C1.4

Renewing glass panes and refixing existing wooden fillets:Float glass panes of nominal thickness 5 mm (weight not less than 12.5 kg/sqm) DAR NO-14.7.2

Providing and fixing of kitchen shelves/cabinet with basket, shutter is made by 18 mm HDHMR board and back side of box is made by 12 mm HDHMR Borad . Length and width of cabinet is 50 cm and depth/height of cabinet is 65cm including cost of all accessories such as handle, hinges, rolling channel, basket, catcher etc complete work.

Plain Basket 19x20x4" Rate-2268/1.18=1915.25

Plain Basket 19x20x6" Rate-2688/1.18=2261.02

Plain Basket 19x20x8" Rate-3120/1.18=2644.07

Providing and fixing of kitchen cubborad shutter is made by mica laminated 18 mm HDMHR board and back side of box is made by 12 mm HDHMR . Length and width of cabinet is 30 cm and depth/height of cabinet is 60 cm including cost of all accessories such as handle, hinges, rolling channel, basket, catcher etc complete work.

Providing and fixing of wooden Almirah Frame Work with mica laminated 19 mm ply board out side with one side decorative lamination . including cost of all acessories such as SS handle, hinges, lock, rolling channel etc complete work.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DAR NO-15.23.1

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.(dar-11.38)

Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete.DAR NO-8.31

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plain & threaded fittings , i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipe & fitting with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of pipes complete as per direction of Engineer - in - charge , concealed work . including cutting chases and making good the walls etc (20 mm nominal outer dia pipe )18.8.2

Providing and fixing SWR pipes as per 15:13592 110 mm dia for drain & sewer system with trenching , refilling & testing of joint complete including all fitting , labour and T&P etc .

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore DAR NO-18.53.1

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia DAR NO-17.22 B

Providing and fixing C.P. brass center hole basin mixture oF Equivalent quality L& K Make

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DAR NO-18.50.1

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. DAR No-17.33

Providing and fixing C.P. brass OVER HEAD shower with arm heavy quality L&K 0668 with 15mm inlet: 150 mm diameter

Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete.

Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete.

Providing and fixing CP towel Rod OF L&K Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete.

Providing and fixing CP towel ring L & K or equivelent fittings arrangement of approved quality.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR NO-17.81

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DAR No- 17.7.A

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittingsDAR No- 17.8

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31)

Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter :30mm thick including isi marked stainless steelbutt hinges with necessary --9.21.2

Brick work with common burnt clay (non madular) brick of class- 150 in superstructure above plinth level up to floor V level in all shape and sizes in cement mortar 1:4 ::(1 cement :4 coarse sand )( Dar 6.4.1)

centering and suttering including shuttring , propping etc and removal of form work for : Suspeneded floors, roofs, landing , balconies and access platform (dar -5.9.3)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). (dar-5.8)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. DAR NO-5.22A.6

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble DAR NO-8.2.1