PROVN OF FOOTPATH FROM RAILWAY CROSSING NEAR MANDIR TO KALA PATHAR CHOWK, PROVN OF TURBO EXHAUST FAN IN OFFICE AND OTM SHELTERS AT PMS

Amount

M & L for excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

M & L for PCC (1:4:8) Type D2 using 40 mm graded crushed stone aggregates as in foundations ,fillings and mass concrete complete all as specified.

M&L for providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature , jointed with cement mortar 1:3 , including making joints with or without grooves, including making drainage opening wherever required complete all as specified and as directed.

M&L for Moorum/red bajri /clinker filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne and n.exc 12 tonne complete all as specified and as directed.

M&L for Hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M & L for PCC (1:4:8) 100 mm thick Type D2 using 40 mm graded crushed stone aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed.

S&F Reinforced concrete pipes ,class NP2, 150 mm bore laid and jointed in trenches or in floors complete with collar all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate ) in concrete bed to drain pipes including forming cradels after they are laid and tested for pipes of 150 mm bore complete all as specified.

M & L for Brickwork with flyash bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M & L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block prepolished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and as directed.

M&L for providing precast cement concrete Type B1 1:2:4 (20 mm graded crushed stone aggregates) in landings, cover slabs (for man holes etc.) in chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facescomplete all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished fair and even complete all as specified and as directed.

M&L Cement concrete 1:3:6 , Type C-1 (using 20 mm graded stone aggregate) in surface channels and drains and manholes complete etc.as specified & directed by Engr-in-Charge

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.as specified & directed by Engr-in-Charge

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1(using 20mm graded crushed stone aggregate) complete all as specified and directed.

M&L for prepration of new plastered surfaces or kerb stones of any description applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

S&F Turbo ventilator SS built with vane thickness 0.9mm with ball bearings, turbine dia 760mm with bottom ring dia 600mm, FRP base plate 2mm thick clear 1.02 mtr wide and 1.65m long matching the profile of existing sheet, weight approx 8.0 Kg complete all as per manufacturer instructions and as directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified any height Mtr height including all necessary scaffolding and safety measures complete all as specified and directed.

GALSI DEVELOPERS PVT LTD (BID ID -3475446)