Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹80,710
Closing Date
26 Dec 2025, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
120 days
Expenditure
General
65
6 conditions · 2 needing a document upload
The tenderer should provide satisfactory evidence, acceptable to the purchaser to show that he is a regular manufacturer and has adequate plant and manufacturing capacity and has a "Quality Assurance Program". Information as per Annexure-2 under bid document Part-I may please be furnished. The manufacturer shall have valid ISO-9001 certificate on the original date of closing of tender and a copy of same should be submitted along with the bid. The AIRLESSCENTRIFUGALSHOTBLASTING& PEENINGMACHINE or similar shall be in the scope of ISO certificate.
. The bidder/ manufacturer must have supplied at least 02 nos. of same/similar machines in last 10 years (to be reckoned from the original date of closing of tender). Statement of past supplies along with, (i) purchaser%u2019s name and (ii) address, (iii) email address and (iv) phone/fax number of purchaser, (v) purchase order (PO) or supply order number and (vi) PO date (vii) along with the copies of purchase order (PO), (viii) quantity supplied (with proof of supply), (ix) date of supply and (x) their commissioning date shall be submitted with the offer. Copies of POs/commissioning /performance certificate submitted shall also indicate the parameters/ specification of subject machine to prove same/ similarity aspect of the machine as mentioned in para 3 below; technical specifications of the machine from the related document of the PO may be attached to supplement the PO in regard to the respective parameters of similarity aspect of the machine. Specifications attached shall have linkages to the PO.
For the purpose of similarity, similar machine required under clause 2 means AIRLESS CENTRIFUGAL SHOT BLASTING& PEENING MACHINE with a capacity of 10 Ton having supplied in last 10 years.
The tenderer shall, in their offer, submit performance certificate of 01 no. of such machine (which are counted for the purpose of clause 2 above) supplied in the last 10 years and the machine covered by these certificates must have worked Satisfactorily for at least one year from the date of commissioning as on the original date of closing of tender. The Certificate shall not be older than one year from the original date of closing of tender. The performance certificate issued after original date of closing of tender (in cases where tender closing date has been extended) are also acceptable however the machine must have completed one year of satisfactory working after date of commissioning as on original date of closing of tender. The performance certificate submitted by the tenderer shall have been issued by the actual end user organization of the machine, with their clear signature and address therein, in whose premises the machine is installed and commissioned. Performance certificates should be as per Annexure A1.
. All necessary information/ documents required for establishing reference requirement as per clause A (2) to A (4) above shall be submitted by the bidder along with original offer itself for establishing traceability of documents/ entities such as manufacturer/ PO /consignee/supply/Installation/ Commissioning/ performance certificate of the machine. No further clarification/ correspondence shall be sought/ entertained in this regard. In case, no information or incomplete information or illegible information is furnished by the bidder, their offer shall be summarily rejected.
Non-compliance of following shall lead to summarily rejection of the offer and no correspondence in this regard will be entertained. a) The productivity requirement, as specified in clause 2.4 of Section -IV of the bid documents part-II shall be clearly furnished. b) There shall not be any deviation from the Major parameters mentioned in clause 2.2.1 of section IV of the bid documents part-II.
32 conditions
IN CASE BIDDER IS INDIAN FIRM OR FROM A COUNTRY THAT DOES NOT SHARE LAND BORDER WITH INDIA, SHALL CONFIRM AS UNDER:- I have read the clauses regarding restrictions on procurements from a bidder of a country which shares a land border with India as per Annexure F of WCRs e-TENDER DOCUMENT FOR SUPPLY CONTRACTS (Ver. 7.0, applicable w.e.f. 31.10.2022) with Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021-PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023 (copy enclosed as enclosed document) ; I certify that this bidder (in whose behalf I am submitting this bid) is not from such a country which shares a land border with India (Note:- Indian firms and firms from countries not sharing border with India, may please confirm as YES)
IN CASE BIDDER FIRM IS FROM A FOREIGN COUNTRY THAT SHARES LAND BORDER WITH INDIA, SHALL SUBMIT CERTIFICATE AS UNDER:- I certify that this bidder (in whose behalf Iam submitting this bid) is from such a country which shares a land border with India with regard to contents of Annexure F of WCRs e-TENDER DOCUMENT FOR SUPPLY CONTRACTS (Ver. 7.0, applicable w.e.f. 31.10.2022) with Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021- PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023; and I further certify that this bidder has been registered with the Competent Authority. I hereby further certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Note 1; WHEREVER A BIDDER FROM SUCH A FOREIGN COUNTRY THAT SHARES BORDER WITH INDIA QUOTES, HE WILL NEED TO UPLOAD A COPY OF VALID REGISTRATION BY THE COMPETENT AUTHORITY (OR DOCUMENTARY EVIDENCE OF EXEMPTION AS PER NOTE 2 BELOW) WITHOUT WHICH THE OFFER SHALL BE SUMMARILY REJECTED.) (NOTE 2: Restrictions under this rule shall not apply to bids from such countries (even if sharing a land border in India) to which the government of India has extended lines of credit or in which the government of India is engaged in developmental projects. For updated lists of credit or in which line of credits have been extended or in which developmental projects are undertaken are given in the website of the Ministry of External affairs and in such firm will need to submit such documentary evidence.) The terms 'bidder' and 'bidder from a country which shares a land with India' shall be as defined in para II and III respectively of Annex III o f Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021-PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023.
(i)CODE OF INTEGRITY, MISDEMEANOR AND PENALTIES :-I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that none of our sister concern or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concern or affiliates including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage. (Note: - May confirm as Yes , to certify all the above certification . )
(ii)CODE OF INTEGRITY, MISDEMEANOR AND PENALTIES :-In case your confirmation in commercial compliance regarding Code of Integrity, Misdemeanor and Penalties is NO, then provide/upload the names and addresses of your sister concerns or affiliates .
PLASTIC WASTE MANAGEMENT RULE 2016 :-"It is certified that for execution of this contract, the plastic packaging material or commodities which are made out of Compostable Plastic or Biodegradable Plastic shall be purchased from firms having certification by CPCB for manufacture or sale of plastic packaging or commodities made from Compostable Plastic or Biodegradable Plastic as per rule 4 (4) of Plastic Waste Management rule 2016. It is also certified that we shall also not use any other category of plastic, such as Bio Compostable or Oxo-degradable or Oxo-bio-degradable or the like, which are not recognized under Plastic Waste Management Rule 2016 with all amendments." (Note: - May confirm as Yes , to certify all the above certification . )
Jurisdiction of Court :- As per Para 2703 of IRS Condition of Contract the Courts of the place from where the acceptance of tender has been issued shall alone have jurisdiction to decide any dispute arising out of or in respect of the contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
By TPI
1 condition
Validity of Offer: Offer with lesser validity than stipulated in the tender will be considered as unresponsive
1 location across Madhya Pradesh · 1 Numbers total
PATIENT BED FOWLER
65255007~SWR
65255007
Limited - Indigenous
Goods
Madhya Pradesh
₹0
₹80,710
26 Dec 2025
22 Dec 2025
1 item · 1 Numbers total
Airless centrifugal shot blasting machine for cleaning and shot peeing of coil springs as per a ttached Specification No. CRWS/IR/M&P/2024-25/ver.01. EVALUATION CRITERIA: Total value of the offer will be calculated based on: (i) The cost of the basic machine. (ii) Cost of the concomitant accessories accordin g to tender specifications. (iii) Cost of any other accessory which in the opinion of supplier is essentially req uired for making the machine fully functional. (iv) Cost of Turnkey Charges viz. construction of foundation, i nstallation & commissioning etc. (v) Applicable duties and taxes, insurance, freight charges etc. (vi) Spares for two years normal operation and maintenance as per clause 5 of Section-V. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BOGIE REPAIR/BPL, WCR | Madhya Pradesh | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5599270.pdf
ATTACHMENT
5580369.pdf
ATTACHMENT
5582023.pdf
ATTACHMENT
5637834.pdf
ATTACHMENT
5637825.pdf
ATTACHMENT
5637832.pdf
ATTACHMENT
5501318.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .