19/2024-25/EUDC-I/GZB

Amount

Carriage of 250 KVA 11/0.4 New Transformer from Store center to various work site loading and unloading both side. distance 1 km to 50 km.

Carriage of ST Pole SP-55 11 mtr Long from Store center to various work site loading and unloading both side. distance 1 km to 50 km.

Carriage of 11 KV XLPE Aluminium Cable Size 3x35 from Store center to various work site loading and unloading both side. distance 1 km to 50 km.

Carriage of Cable LT XLPE 3.5x150 sqmm from Store center to various work site loading and unloading both side. distance 1 km to 50 km.

Carriage of line material as per site requirement:- Earth Rod 2500x20 mm- 2 Nos, Cable Box O/D 11 KV 3x35 XLPE- 4 Nos, ACSR Weasel Conductor- 40 Mtr, Fuse Set 11KV- 1 Set, 11KV Composite Polymer Pin Insulator- 12 Nos, MS Angle 65x65x6 mm- 45 Kg, 11KV TPMO Switch- 1 Nos etc other material... from Store center to work site loading and unloading both side. distance 1 km to 50 km.

Erection of ST Pole11 Mtr Long complete in all respect as per respo Norms.

Providing and Grounting/Concreting 1:4:8 cement send bric ballast and making of plinth 300 mm above ground lavel of Pole complete in all respect as per respo Norms.

Providing and Earthing of pole with earth rod and all accessories complete in all respect as per respo Norms.

Providing/Constuction Complete Plinth of Transformer Size 2x2x1.5m with fixing of two nos. Channel of the top of the plinth RCC slab of 4" Thick on the top of the plinth Plastering outer surface of walls and its proper curing for erection and commissioning with all required Material at site with all accessories complete in all respect as per respo Norms.

Safely Placing of 250 kva 11/0.4 new T/F on the plinth by the help of Crane/Chain Cuppie complete in all respect as per Respo Norms at site.

Providing and Complete Wiremesh T/F Fencing 2.5 Mtr with Fabrication, erection, grouting, plinthing & painting MS agnle at site with all accessories complete in all respect as per respo Norms.

Providing and Complete Chemical Earthing with all accessories complete in all respect as per respo Norms.

Laying of 3x35 Sqmm All. XLPE Cable Double ckt (195*2 + 60 Mtr loop and riser) open cut size 500 mm wide 900 mm after laying of cable box with Sand and bricks stone slab sepration of two cable by brick wall. The inter axial spacing between two cable should be in between 0.25 m to 0.40 m complete in all respect as per respo Norms.

Laying, Lifting and sagging of Cable LT XLPE 3.5x150 sqm complete in all respect as per respo Norms.

Fixing/Installation of all line material as:-Earth Rod 2500x20 mm- 2 Nos, Cable Box O/D 11 KV 3x35 XLPE- 4 Nos, ACSR Weasel Conductor- 40 Mtr, Fuse Set 11KV- 1 Set, 11KV Composite Polymer Pin Insulator- 12 Nos, MS Angle 65x65x6 mm- 45 Kg, 11KV TPMO Switch- 1 Nos etc... complete in all respect as per respo Norms.

Supply and fixing G.I. Barbed Wire complete in all respect as per respo Norms.

Supply and fixing Danger Board with Clamp for 11KV Line complete in all respect as per respo Norms.

Supply and fixing Stone Pad complete in all respect as per respo Norms.

Supply and fixing Nut Bolt with Washer off size complete in all respect as per respo Norms.

Supply and fixing MS Holding Clamps complete in all respect as per respo Norms.

Supply and fixing MS Channel 100x50mm complete in all respect as per respo Norms.

Supply and fixing Sundry Items complete in all respect as per respo Norms.

Supply and fixing G.I. Pipe 6" DIA complete in all respect as per respo Norms.

Supply and Fixing/complete Installation of LT Tailless Unit 300 Amp with Copper Bus Bar (3 Unit for 250 KVA Tanformer) Complete Sturcture including supply and errection with all accessories complete in all respect as per RESPO norm.

Divy Electrical Engineering