REPAIRS TO JOINERIES, INTERNAL WATER SUPPLY SYSTEM, RCC PROJECTED MEMBERS AT HIGHER LEVELS AND UNDER AGE B/R-II AT DIPATOLI MIL STN

Amount

Taking down chowkhat or frame with shutters (without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

Taking down shutters area n exc 1.0 Sqm each complete as specified and directed.

Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete as specified and directed.

Taking down of shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and refixing in same opening shutters including cutting to size and fitting, complete as specified and directed.

M&L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed, complete as specified and directed.

S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed.

S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part-I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.

S&F factory made 30 mm thick glazed and Skelton windows and ventilator shutter 2nd class HW open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated with sash bars (any numbers) fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part-I section-8, clause 8.24(b) and fixed to Chowkhats, complete all as specified and directed.

S&F flush shutter 35 mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F factory made steel window with side hung shutters including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as shown on drg, complete as specified and directed.

S&F factory made steel window with side hung shutters including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as shown on drg, complete as specified and directed.

S&F factory made steel ventilator with top hung shutters including two pairs of brass cup pivots catch spring and pully wheel complete all are specified and directed.

M&L for Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290.

Running welding in repairs having thickness of metal n.exc. 6mm including making cupboard/window operational complete including provn of frictional / non frictional hinges, locking slots complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing and with fancy design.

S& F factory made solid PVC moulded door shutter with particle board core, 30 mm thick (styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front and 2 mm moulded prelam PVC sheet on back face complete all as specified and directed

Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window with fancy design.

S&F powder coated aluminium alloy paneled door shutter compring of the followings and specified including making good to disturbed surfaces to match with the adjoining surfaces :- (a) Cross section of x chowkhat frame 101.60x44.45x2.01mm thick (b) Cross section of hanging and meetng style 85x44.45x2mm thick (c) Top rail and bottom rail of cross section 114.30x44.45x1.95mm thick (d ) Locking rail (middle rail ) of cross section 83.5x44.45x1.70mm thick (e) Aluminium alloy handle disc type , powder coated -02 Nos per leaf (f) Aluminium alloy powder coated tower bolts 200mm long 01 No. per leaf (g) 150mm long Floor door stoper of aluminium alloy powder coated body and tongue, anodised with hard drawn steel spring-01 no. per leaf (h) Lock with key openable from both side (in and out side) -01 No. per door (i) Aluminium alloy anodised butt hinges (ISI) marked of size designation 100B11-03 Nos per shutter (j) 4mm thick tinted glass fitted with Aluminium beads of suitable size aluminium beading and neoprene gaskets etc. ( Note:- The sizes of Aluminim sections mentioned are Minimum sizes.) with fancy design.

Taking down aluminium doors shutters of any size and carrying out minor repairs/ adjacent including, aluminium beads, cleats of required size and re-fixing in same position complete all as specifeid and as directed with fancy design.

Taking down aluminium windows shutters of any size and carrying out minor repairs/ adjacent including, aluminium beads, cleats of required size and re-fixing in same position complete all as specifeid and directed.

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed with fancy design

M&L for 30mm width of flap MS piano hinges complete all as specified and directed

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified and directed

S&F Aluminimum anolised barrel tower bolt of extroded section 100 mm long, complete all as specified and directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F Aluminum handle cast type anodized size 100 mm long, complete all as specified and directed.

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 75 mm size, complete all as specified and directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size, complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm)

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm)

S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified and directed

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

S&F in repair Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required.

S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each pane including glazing pins where required.

M&L cement concrete type B1, (1:2:4) (20 mm graded crushed stone aggregate) as in coping, bed block, water trought and similar works including rounding, chamfered and throting complete all as specified and directed

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces.

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed

Taking up or down steel tubing and connection of 15 dia bore.

Taking up or down steel tubing and connection of 20 dia bore.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth.

M&L 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor

Refixing old steel tubing and connections in new or old position 15mm dia

M&L 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor

Refixing old steel tubing and connections in new or old position 20mm dia

Dismantalling of existing water tanks 1000 ltr and removing to stores all as spd and directed.

S&F in repair hoisting 3 layers PVC tank 1000 litres capacity including supply & Fix 20mm dia brass float valve assembly complete all as specified & directed

Dismantalling of existing water tanks 500 ltr and removing to stores, complete all as specified and directed.

S&F in repair hoisting 3 layers PVC tank 500 litres capacity including supply & Fix 20mm dia brass float valve assembly complete all as specified & directed

S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank with fancy design.

S&F in repar vitreous China squatting pattern water closet 'Orissa Pattern' size 580 x 440 mm white with integrated foot rests including provn of lime concrete, complete as specified and directed.

S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap, complete as specified and directed.

Supply & fix plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or anodised hinging device. Note : Fixing only rate is included in above item.

S&F in repair PVC valveless syphonic action duel flush type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make all as specified and directed (with fancy design).

S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed (with fancy design).

S&F in repairs. vitreous china wash basin, white flat back size 550 x 400mm (excluding taps, incl. CP waste coupling & PVC waste pipe and brackets

S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head 'HOT' or 'COLD' with long screwed shank and flynuts screwed for iron pipe (half turn type)

S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete as specified and directed.

S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore (with fancy design), complete as specified and directed.

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (half turn type), complete as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete as specified and directed.

S&F chromium plated jet spray / health faucet.

S&F chromium plated hand shower with fancy design.

S&F chromium plated toilet paper holder size 150 x150mm complete all as specified and directed. (Make : Plumber economical series or Marc/Jaquar/Seiko/ Crabtree as approved by GE)

S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore (with fancy design), complete as specified and directed.

S&F in repairs Brass CP mixer tap 15mm dia bore (three in one) for mixing hot & cold water screwed down for iron pipe (with fancy design), complete as specified and directed.

S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe (with fancy design), complete as specified and directed.

M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower, complete as specified and directed.

S&F in repair Brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges, complete as specified and directed.

Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed.

M&L Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc, complete as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete surfaces at height up to 10 m and finished the surface fair and even complete as specified and directed. Note : Necessary arrangement for scafolding where required deemed to be included in the unit rate.

M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete and finished the surface fair and even complete as specified and directed

M & L for rendering 10 mm thick in cement Mortar (1:4) on the surfaces of ceiling/soffit of slab, projection of chajja etc at height upto 10 m and finished the surface fair and even complete as specified and directed. Note : Necessary arrangement for scafolding where required deemed to be included in the unit rate.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion over surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

Roughening old surfaces by picking, sweeping clean and washing down with water remove dust complete all as specified and directed.

Dismantling floor, hearth or wall liling including cement mortar beding layer, complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250 x 7 mm / 450 x 350 x 7mm thick over10 mm thick cement plaster in cm (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in cm (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in cm (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

S&F in repair 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

cleaning and removing all scale and dirt, etc, from PVC water storage tanks of capacity 500 ltrs and from mouths of circulating pipes etc complete all as specified and directed.

cleaning and removing all scale and dirt, etc, from PVC water storage tanks of capacity 1000 ltrs and from mouths of circulating pipes etc complete all as specified and directed

S&F PVC (SWR) 'S' or 'P' trap 125/110mm dia, complete as specified and directed.

M&L (in repairs) PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75 mm dia. outlet complete all as specified and directed.

S & F in repair PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches for the following bore of pipe :- (a) 110 mm dia bore.

(b) 75mm dia bore

S&F in repair PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall for the following bore of pipe :- (a) 110 mm dia bore.

(b) 75mm dia bore

S&F in repair PVC (SWR) bends any radius with solvent cement joints, fixed to for the following bore of pipe :- (a) 110 mm dia bore.

(b) 75mm dia bore

S&F in repair PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to for the following bore of pipe :- (a) 110 mm dia bore.

(b) 75mm dia bore

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and directed. Note : Water Proofing Compound shall be measured and paid separately

M&L for rendering 15 mm thick on concrete or brick surface in cm (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement. Note : WPC will be measured and paid separtely

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

M&L for PCC (1:5:10) Type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed.

S&F 32 mm bore GI pipe light grade for spout pipe in sunken portion complete all as specified and directed.

M&L for repair and rendering 10mm thick in cm (1:3) on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed

Demolition of reinforced cement concrete/loose concrete above ground floor at height up to 8 m, in any position like roof, landing, staircase, chajja and similar suspended works complete all as specified and directed. Note : Necessary arrangement for scafolding where required deemed to be included in the unit rate.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc at any height including support of fair finished surfaces complete all as specified and directed

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick, rough finished surface of concrete complete.

Use and waste form work to chullah hoods, chajjas, troughs and similar items in cluding edges, complete all as specified and directed

M&L RCC type B-1, (1:1.5:3) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies in etc, complete as specified and directed.

M&L RCC type B-1, (1:1.5:3) using 20 mm graded stone aggregate as in chajja etc, complete as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bar 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M/s Aditya Narayan Sahu

M/S CITY ENTERPRISES

M/s R R MUKHERJEE & CO

M/S KAMLESHWAR SINGH

Delhi Enterprises

M/S.R.S.Chauhan and Sons

M/S SHAMBHU SHARAN SINGH