REPAIRS TO ROOF SEEPAGE / DAMPNESS AND CERTAIN CONNECTED B/R NATURE WORKS OF MD AND OTM ACCN UNDER AGE B/R-I OF GE (WEST) AGRA

Amount

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

Cutting ,chases ,pinning in. making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps, cills, sunshades ,shelves ,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting exc 20cm girth complete all as specified and directed by Engr-in-Charge

M & L APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gm/sqm) land on a coat of blown type bitumen at the rate of 1.5 kg per Sqm and blinding with clean dry sand @ 0.05Cum per sqm primed surface by forced application complete all as specified and directed by Engr-in-Chargecomplete all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B1 using 20 mm graded aggregate with integral water proofing compound as per manufacturer instruction finished fair and even smooth in lintels upto 1.5 m clear span ,cills steps siesmic and other similar bands ,plinth courses etc as directed (Note: WPC will be measured and paid separatly) complete all as specified and directed by Engr-in-Charge

M&L Rendering cement plaster 15mm thick on fair faces of brick work/concrete surfaces in cement mortar 1:4 with WPC as per manufacture instructions finished even and fair w/o using extra cement. complete all as specified and directed by Engr-in-Chargecomplete all as specified and directed by Engr-in-Charge (Note: WPC will be measured and paid separatly)

M&L 15mm thick cement plastering in cement morter 1:4 with WPC as per manufacture instructions on other than fair faces of brick work finsihed even and fair without using extra cement complete all as specified and directed by Engr-in-Charge (Note: WPC will be measured and paid separatly)

M&L for two coats of oil bound distemper on wall surfaces over a coat of 1mm thick wall care putty on newly plastered surfaces walls incl preparation of surfaces complete all as specified and directed by Engr-in-Charge

M&L for two coats of oil bound distemper on wall surfaces over a coat of 1mm thick wall care putty on old plastered surfaces walls incl complete removal of extg treatment preparation of surfaces complete all as specified and directed by Engr-in-Charge

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M & L for applying three coats of water proofing coating liquid by brush applying in wall surfaces complete all as specified and directed by Engr-in-Charge

Supply only integral water proofing compound (mix in cement morter as per manufacture instructions complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer of cement mortar in CM 1:6 complete all as specified and directed by Engr-in-Chargecomplete all as specified and directed by Engr-in-Charge.

M&L for ceramic non-skid coloured tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic joint freee tiles in vertical surface 350x250mmx7mm / 450X350 X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including taking down cement plaster, wall tiles and rendering 10mm thick plastering in CM 1:4 on brick wall complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests and necessary concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC flushing cistern 10 Ltrs capacity, low level, white with inlet ball & float valve and handle including brackets complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china wash basin white flat back size 550 x 400 mm including waste pipe and coupling, chain plug brackets complete all as specified and directed by Engr-in-Charge

S&F pillar taps of PTMT any colour high pressure screwed for iron pipe or for union and fixed bore of pipe 15mm (min wt 110 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x330mm x160mmcomplete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connections 15mm size, 450mm long with PTMT nuts on both ends complete all as specified and directed by Engr-in-Charge

S&F in repairs 15mm bore (external threaded) bib taps cast copper alloy, cromium plated, long body, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repairs bib tap standard of PTMT, any colour, high pressure, screwed for iron pipe or for union, bore of pipe 15mm (min wt 90 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union bore of pipe 15 mm all as specified and directed.

S&F in repairs angle/stop valve of PTMT any colour high pressure screwed for iron pipe or for union, bore of pipe 15 mm (min wt 90 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs stop valve long shank (Concealed) (external threaded) cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed in repairs bore of pipe 15mm, complete all as specified and directed by Engr-in-Charge.

S & F swivel shower rose of PTMT any colour for fixing with 15 mm pipe (Min wt 40 gms) as in repairs including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S&F in repair 100 mm square PTMT grating (Min weight 25 gms) complete all as specified and directed by Engr-in-Charge

Demolition of brick work masonery built in cement mortar complete all as specified and directed by Engr-in-Charge

M&L of brick work in CM 1:6 using sub class 'B' bricks straight or curved on plan exc 6m mean radius as in manholes, etc complete all as specified and directed by Engr-in-Charge.

M&L of brick work in CM 1:6 using sub class 'B' bricks (EXCEPT BRICKS) straight or curved on plan exc 6m mean radius us in manhole,etc complete all as specified and directed by Engr-in-Charge.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and directed by Engr-in-Charge

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for Cutting the roots of trees from the brick walls/stone wall made in cm exc half and not exc one brick thick and making good the disturbed surfaces including coating of paving hot bitumen to arrest further growth to the roots including repair existing surfaces with cm 1:3 or PCC 1:2:4 complete all as specified and directed by Engr-in-Charge

Taking up or down 15mm dia steel tubing and connections etc complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Engr-in-Charge.

Taking up or down 20mm dia steel tubing and connections etc complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.)complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mmcomplete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bends of 110mm radius to PVC SWR pipes complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bends of 75mm radius to PVC SWR pipes complete all as specified and directed by Engr-in-Charge.

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engr-in-Charge.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of grade fe-410-0 & fe 310-0 complete all as specified and directed by Engr-in-Charge.

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge.

M&L cement concrete type B-1, 1:2:4 mix ( 20 mm graded agg) in padding, roof kerbs or mud stops, rounded or chamfered on edges and similar work incl necessary formwork acomplete all as specified and directed by Engr-in-Charge

Dismantling PVC water tanks exc 250 but n.exc 500ltr capacity complete all as specified and directed by Engr-in-Charge.

Dismantling PVC water tanks exc 500 but n.exc 1000ltr capacity complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethene water storage tank 500 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug and check nuts complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethene water storage tank 1000 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug and check nuts complete all as specified and directed by Engr-in-Charge.

M&L 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge.

M&L in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge.

MNR ASSOCIATES (BID ID -3122089)

VASUNDHARA AND COMPANY (BID ID -3122064)

C P Singh and Co (BID ID -3108584)

SahaDevSingh Constructions (BID ID -3107180)

M/S APOORVA CONSTRUCTION (BID ID -3107354)

rohan traders (BID ID -3122518)

VARDMAN ENTERPRISES (BID ID -3121505)