MAINT AND REPAIR WORKS TO STEEL WINDOWS WOODEN PVC DOORS WATER SUPPLY PIPES AND ASSOCIATED WORKS IN MUTAGA NORTH CAMP AND MES COLONY AT AFS SAMBRA

Amount

Material, Labour, Tools & Plants for Rubbing and Mirror polishing through four to five types of polishing bricks of different grains to existing kota stone/marble/terrazzo tile to remove all stain, dirts/soil marks etc. including filling of cracks, cavity, joints etc. using Tenax mastic stone filling chemical of approved type complete all as specified and directed.

Taking down cement plaster of any thickness from stone/brick/concrete/RCC wall/ceiling surfaces including raking out joint, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling of wall/ floor/dado, hearth or wall tiling or terrazo cement concrete tiling including cement mortar bedding of any thickness (but not backing) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings of any grade of mix not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description of any grade of mix and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling asbestos cement (Corrugated, semi corrugated, etc) sheets in roof coverings including ridges all as specified and directed.

Dismantling RCC posts or struts ( steel , RCC) any section including taking down embedded portion from concrete, brick work, masonary etc. and making good disturbed ground all as specified & directed

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sq. m each all as specified and directed.

Taking down Chowkhats or frames not exceeding 1.5 sq. m each with shutters (without taking off shutters from the frames) including making good using plaster and PCC as required all as specified and directed.

Taking down Chowkhats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames) including making good using plaster and PCC as required all as specified and directed.

Dismantling water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs all as specified and directed.

Dismantling water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs all as specified and directed.

Demolition of reinforced concrete, in suspended slabs, beams, lintels, etc (reinforcement out as required to facilitate demolition) all as specified and directed.

M & L Plain Cement Concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in 75mm thick plinth protection and finished even and smooth without using extra cement including cutting and filling expansion joint and filled with bitumen - sand mixture complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in 100mm thick hard standing or paving etc and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary form work and exposed surface of concrete shall be finished even and smooth without using extra cement all as specified and directed.

M & L Hardcore with broken stone or boulders gauge not exceeding 63 mm size deposited spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface all as specified and directed

M & L Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in 75mm thick sub base to floor finished fair and even complete all as specified and directed

Providing and laying Pre-cast cement concrete Paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, 60mm thick factory made chamfered edge of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete in all respect as specified and directed.

Supply only liquid water proofing compound all as specified and directed

M & L Pre-cast cement concrete 1:3:6 type C1 using 20 mm graded stone agrregate as in solid block masonary exceeding 10cm width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:6 including demolition of existing masonary work complete all as specified & directed

M & L rendering 15 mm thick cement mortar 1:6 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick cement mortar 1:4 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 10 mm thick cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in 25mm thick levelling course/sub base under floor all as specified and directed.

M & L Coloured glazed ceramic tiles of size exceeding 0.09 sqm but not exceeding 0.18 sqm in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over and including screed bed 15 mm thick cement mortar1:6 complete all as specified and directed.

M & L Vitrified coloured ceramic tiles,double charged, 8-10 mm thick (square/ rectangular) polished, with rectified edges ( joint free) etc of area of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slury over & including screed bed 15 mm thick cement mortar 1:6 complete all as specified and directed.

M & L Vitrified Ceramic tiles,double charged, 8-10 mm thick (square/ rectangular) polished, with rectified edges ( joint free) etc of area of each tile not exceeding 0.36 sqm as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry over & including 10mm thick backing coat cement mortar 1:4 complete all as specified and directed.

M & L Machine cut cudappah stone slab 20-25mm thick in vertical/horizontal position, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L Rolled mild steel any type/size sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors and door frames; fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165) complete all as specified and directed.

S & F Mild Steel flat as in wind ties for roofing including securing bolts confirming to Fe -290 Gde E-165 all as specified and directed.

S & F Prepainted galvalume aluminium zinc coating GI based trazoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

S & F Plain, galvanised, mild steel 1.00mm thick sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, size design as per site complete all as specified and directed.

S & F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

S & F Galvanised Iron wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste etc complete all as specified & directed

M & L Precast cement concrete 1:3:6 type C-0, using 12.5mm graded stone aggregate as in 50mm thick louvres and jallies set in cement nortar 1:4 (measured solid) including all mouldings but excluding frame complete all as specified and directed.

M & L RCC 1:2:4 type B-1 using 20mm graded stone aggregate in lintel over 1.5m clear span or similar items etc. complete in all respect as specified and directed

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc flat finished fair surfaces as specified and directed

M & L welding in repairs exceeding 2.5 cm but not exceeding 5.00 cm in length and welded to not exc 6mm thick metal all as specified and directed.

S & F WPC (Wood Polymer Composite) frame size 50X100mm, Factory made single extruded solid door/ window/ Ceosetory windows & other Frames comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

All as per item No 43 herein before but size of frame 65X125mm

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

M & L Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete laid over & including 20mm screed bed in cement mortar 1:6 complete all as specified & directed.

M & L Machine cut kota stone slab in dado/skirting 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete fixed over & including 15mm backing coat cement mortar 1:4 complete all as specified & directed.

M & L Pre-polished (table rubbed and polished) machine cut Granite stone work, 16-18mm thick of any type & size in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete in all respect as specified & directed.

M & L Pre-polished (table rubbed and polished) machine cut Granite stone work, 16-18mm thick of any type & size in steps(risers), jambs, pillars, dado/skirting and like laid over cement screed bed 15mm thick cement mortar (1:4) and jointed with grey cement slurry including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete in all respect as specified & directed.

M & L Mild steel work as in Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars (fancy design as directed), plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 throgh hold fast/fastners etc. including necessary PCC in hold fasts complete in all respect as specified and directed.

S & F Factory made uPVC white colour casement (Openable) window area of each window not exceeding 1 Sqm for made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners all as specified & directed

Note : Net opening will be measured for payment purpose. Also, the unit rate quoted by contractor included the following items :- (a) Hardware: casement handle made of zinc alloyed (white powder coated), Butt Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system (b) Glass and all other connected accessories.

Providing and fixing Factory made uPVC white colour fixed window not exceeding 1 Sqm each made of extruded profiles with wall thickness of 2.3mm(±0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners all as specified & directed Note : Net opening will be measured for payment purpose. Quoted rate includes all other connected accessories.

S & F Aluminium louvered section for toilet window with moving arrangement fixed to UPVC window/Aluminium window complete in all respect as specified

Supplying and fixing Factory made uPVC white colour Sliding window Three track, not exceeding 2 Sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, builders hardware Touch Lock of zinc alloyed (white powder coated), steel roller system etc complete all as specified & directed

Note: (a) Net Opening will be measured for payment. (b) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.

Supply only Door Espag all as specified & directed

Supply only lever door handle all as specified & directed

Supply only standard cylinder all as specified & directed

Supply only centre striker all as specified & directed

Supply only striker all as specified & directed

Supply only drainage all as specified & directed

Supply only glazing bridge all as specified & directed

Supply and fix Dark black tinted sheet glass 4.8mm thick, ordinary quality, in squares, pane in UPVC window sections complete all respect as specified and directed.

M & L Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described, duly filled the voids with enamel based putty and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S & F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S & F Aluminium anodised, barrel tower bolts of extruded section, 200 mm long all as specified and directed.

S & F Aluminium handles, cast type, anodised 150 mm long all as specified and directed.

S & F Butt hinges 100 mm size, medium weight, stainless steel all as specified and directed.

S & F Figured glass 4 mm thick, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

S & F Ordinary rat tail rod pattern springs 300 mm long including roller and roller plate complete in mild steel fixed to MS frame or wooden framed all as specified and directed.

S & F Floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring overall length of cover plate140 mm, fixed in floor all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws in wooden or UPVC window/doors etc. complete all as specified

M & L Preparation of new plastered walls surfaces and applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer complete all as mentioned in SSR and as directed .

M & L new un-decorated wall surface and applying two coat of oil bound distemper over a coat of self primer on 3mm thick layer of wall care putty finished to smooth surfaces all as specified and directed

M & L Complete removal of existing treatment of old decorated wall surface and applying two coat of oil bound distemper over a coat of self primer on 3mm thick layer of wall care putty finished to smooth surfaces all as specified and directed

M & L Preparation of new plastered ceiling surfaces and applying three coats of white wash all as specified and directed

M & L Preparation of old plastered ceiling surfaces and applying two coats of white wash all as specified and directed

Supply and fix rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) double layered, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) double layered, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia complete all as specified and directed.

S & F in repair lid cover for PVC tank including fittings for fixing of cover to tank and locking arrangement suitable for 500 to 1000 ltr capacity all as specified and directed.

S & F in repair Dual flushing cistern low level, 10 ltr capacity PVC valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC flush down pipe with bend short or long etc complete all as specified and directed.

Supply and fix in repair Towel Rail 600mm long brass, chromium plated fixed with and including Chromium pated brass screws all as specified and directed.

Supply and fix wall mounted corner 300mm x300mm shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard all as speicfied & directed

S & F in repairs Alumimium Hat pegs, solid body, 125mm to 175 mm in length all as specified and directed.

Supply and fix in repairs of Soap dish, any type, fixed to plugs with brass chromimum plated fixed with brass screws complete all as specified and directed.

M & L Mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Mild steel TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F in repairs Stainless Steel curtain rails 25mm dia decorative type including end brackets and knob all as specified & directed

PURVIK CONSTRUCTIONS

RAJENDRA KRISHNA SARAF

AARADHYA ENTERPRISES

Raghu M Contractor

Vinod Enterprises

M/S ADITYA CONSTRUCTIONS

LAKSHMI DEVELOPERS

A. N. Kalbhavi

M/S MAHADEV M PATIL