PROVISION OF DEFICIENT FURNITURE FOR UNDER TRAINEE JUNIOR SAILORS SINGLE IN LIVING ACCOMMODATION (200 MEN) WITH GALLERY AND DINING HALL AT INS SHIVAJI LONAVLA

Charpoy IP with hard top :- Overall size shall be all as shown on drawing. Two long rails and two short rails shall be of 25mmx65mmx16 guage MS rectangular pipe .The legs shall be of size 32mmx32mmx1.6mm welded to long and short rails as shown on drg. Two stiffeners of size 25mmx25mmx1.6mm shall be provided on equal distance between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply.Two stiffeners joining legs of size 25mmx25mmx1.6mm shall be provided at 150mm from ground level .12mm thick BWR densified film face shuttering plywood all layers glued shall be provided for top as shown on drg with proper nut and bolt. PVC hard rubber shoes shall be fixed at bottom of each legs. All joints and welding, fixing shall be done according standard workmanship. Make of Plywood : Archidply/Century/Green Ply Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. Drg No. FD/MAP-II/01

Chair dining:-Overall size shall be all as shown on drg.All wood shall be first class teak wood. PVC seat shall be fixed on top as shown of drg. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Make of seat : AMKO Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge. Drg No.FD/MAP-II/05

Chair easy :- overall size shall be all as shown on drg.All wood shall be first class teak wood. The cane shall be 2 mm wide 0.4 mm thick half round and woven in godrej pattern. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge. Drg No.FD-229

Chair writing :-The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.12mm thick hot pressed plywood upholstered with superior quality fabric as approved by GE and moulded polyurethane foam of approved make with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.All joints and welding, fixing shall be done according standard workmanship. Make of cushion:- Sleepwell/Kurlon/Godrej interio Finish & Paint :-All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. Drg No.FD/E6/MAP/12

Form with out back :- Overall size shall be all as shown on drawing.Steel frame shall be provided 25 mm square tube 16 gauge. Wooden seat shall be of TW in one piece of size 1525 mm long 255mm wide and 25 mm thick bolted to frame as per drg.All joints and welding, fixing shall be done according standard workmanship. Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. Drg No.FD-77M

Locker bedside steel :- Overall size shall be all as shown on drawing. Locker shall be made of mild steel sheet of 20 gauge. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets.One chromium plated steel handle of size 120mm long and not less than 50 mm wide with duplicate keys shall be provided. The locking device shall be a three way locking device with proper workmanship. All joints and welding, fixing shall be done according standard workmanship. Make of Lock-Link/Godrej/Harrison. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated in dual shade (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. Drg No.FD-1029

Receptacle :- Overall size shall be all as shown on drawing. The receptacle shall be of capacity 20 ltrs. The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm, provided with swivel lid and handles on both sides as shown in drg. Make -Cello, Tupperware, Amko or equivalent as shown in drg. Drg No.FD/E6/MAP/13

Safe meat :- Overall size shall be all as shown on drawing. All wood shall be first class teak wood.Top shall be of 25 mm thick polished kotah stone as shown on drg. Back/bottom shall be of 18 mm thick MDF board exterior grade BSL (Colour and shade as approved by GE) Polish & Finish:-All wood surface exposed to view when placed in position shall be Melamine polished with high gloss finish. Rest all as per drgs and as directed by Engr-in-Charge. Drg No.FD-370

Stool steel 510 mm :- Overall size shall be all as shown on drawing.All joints and welding, fixing shall be done according standard workmanship. Finish & Paint : All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. Drg No.FD-81M

Table dining 06 persons :- Overall size shall be all as shown on drg. All wood shall be first class MP teak.The top shall be of 18 mm thick MDF board exterior grade BSL (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all round the top of table. 08 Nos trianguler wooden bracket of size 25mmx100mm shall be fixed at the junction of legs with top rails. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. Rest all as per drgs and as directed by Engr-in-Charge. Drg No.FD/MAP-II/03