Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 CrAdmitted-Finance H I C 4 RAMGANGA VIHAR PHASE 2 NEAR GUPTA NURSING HOME THANA CIVIL LINES TEHSIL DISTRICT MORADABAD UTTAR PRADESH | MORADABAD | MORADABAD | UTTAR PRADESH | 244001 | ₹1.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.4 Cr+₹49.4 L (26.1%)Admitted-Finance ALAD NAGAR KARHALA DISTRICT MORADABAD UTTAR PRADESH | MORADABAD | MORADABAD | UTTAR PRADESH | ₹2.4 Cr+₹49.4 L (26.1%) | L2 | Admitted-Finance |
| 3 | L3₹2.6 Cr+₹72.7 L (38.3%)Admitted-Finance | ₹2.6 Cr+₹72.7 L (38.3%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | Rejected-Technical DISQUALIFIED |
| Sl No | Description | Qty | Unit | M/s Chandrabhan Singh L3 | M/s N.A. Construction L2 | M/S shri yash industries L1 |
|---|---|---|---|---|---|---|
| 1.00 | Earth work in filling with 8 km cartage all comp. of work . | 4,715.19 | CUM | 370 ₹17,44,620.3 | 390 ₹18,38,924.1 | 290 ₹13,67,405.1 Lowest |
| 2.00 | Concrete with 4 cm . Gauge brick Ballast fine sand of 1.25 F:M. and cement in Proportion of 12:6:1 in foundation and under floors including supply of all meterials , labour and T&P etc required for proper completion of work. | 169.52 | CUM | 3,250 ₹5,50,940 | 3,100 ₹5,25,512 | 2,575 ₹4,36,514 Lowest |
| 3.00 | Supply/ Stacking of 22.4 -53mm Ram Nagar Stone Ballast with screeing Material | 858.74 | CUM | 4,500 ₹38,64,325.5 | 3,900 ₹33,49,082.1 | 2,917 ₹25,04,941.66 Lowest |
| 4.00 | Consolidation of Stone ballast I/c all comp. of work S.I.No. 755 | 858.74 | CUM | 180 ₹1,54,573.2 | 160 ₹1,37,398.4 | 147 ₹1,26,234.78 Lowest |
| 5.00 | S/Fixxing 80 mm thick COLOURED Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm)of O.P. cement ,smooth high gloss finish skid rediant. Manufactured from rubber moulds through vibro-compression machanism.the compressive strength of concrete paver block shall not be less than 30 MPA (M-30)and weight 5 kg per no. conferming to IS 15658-2006 with a 4 cm thick layer of fine sand including cost of material , labour,T&P Taxes etc required for proper copletion of the work as directed by Engineer in charge. | 8,587.39 | SQM | 1,250 ₹1,07,34,237.5 | 980 ₹84,15,642.2 | 805 ₹69,12,848.95 Lowest |
| 6.00 | R.C.C. work with cement approved course sand and 2cm gauge approved stone gritt in proportion of 1:1.5:3 in slab excluding supply of reinrorcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including nes(S.I. No. 289) | 581.78 | CUM | 8,000 ₹46,54,240 | 8,450 ₹49,16,041 | 6,500 ₹37,81,570 Lowest |
| 7.00 | Mild steel or iron in plain work such as reinforcement concrete or reinfoced brick work (when not included in an over all rates )wrought to required shape as nesessory including bending for proper completion of work and including supply of all steel. | 502.37 | QTL | 6,500 ₹32,65,405 | 6,400 ₹32,15,168 | 5,850 ₹29,38,864.5 Lowest |
| 8.00 | S/Fixxing of Granyte stone with B/work,plaster and diging Lettres on stone for Innogration/Lokarpan i/c all comp of work | 9 | JOB | 6,000 ₹54,000 | 6,300 ₹56,700 | 5,000 ₹45,000 Lowest |
| 9.00 | Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle Iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of peir MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective 'sheet conforming to Type-IV of ASTM. D 4958-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of govemment report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and Incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm | 19.44 | SQM | 6,000 ₹1,16,640 | 5,200 ₹1,01,088 | 3,970 ₹77,176.8 Lowest |
| 10.00Vertical Garden | ||||||
Tender Value
Refer Docs
EMD Value
₹5.3 L
Closing Date
24 Jun 2023, 4:00 pmClosed
CE, NNM
NAGAR NIGAM JALKAL COMPOUND, PILI KOTHI, MORADABAD
(LINE 01) - GROUP A - NCAP Construction of drain and road from C.C. Interlocking Tiles at Mainather near AQMS from Areib Implex to Art Home, Shiv Creation to House of Varis, house to Ashraf to Azeem, Laxmi tyre to Arihant, ETC
2023_DOLBU_807629_1
76/ExEn/Env/NNM/2022-23 DATE 23-05-2023
Open Tender
Civil Works
Item Wise
90 days
MORADABAD
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
NAGAR AYUKT, NAGAR NIGAM MORADABAD
₹5.3 L
Yes
28 Jul 2023
31 May 2023
24 Jun 2023
31 May 2023
24 Jun 2023
31 May 2023
Amount
Earth work in filling with 8 km cartage all comp. of work .
Concrete with 4 cm . Gauge brick Ballast fine sand of 1.25 F:M. and cement in Proportion of 12:6:1 in foundation and under floors including supply of all meterials , labour and T&P etc required for proper completion of work.
Supply/ Stacking of 22.4 -53mm Ram Nagar Stone Ballast with screeing Material
Consolidation of Stone ballast I/c all comp. of work S.I.No. 755
S/Fixxing 80 mm thick COLOURED Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm)of O.P. cement ,smooth high gloss finish skid rediant. Manufactured from rubber moulds through vibro-compression machanism.the compressive strength of concrete paver block shall not be less than 30 MPA (M-30)and weight 5 kg per no. conferming to IS 15658-2006 with a 4 cm thick layer of fine sand including cost of material , labour,T&P Taxes etc required for proper copletion of the work as directed by Engineer in charge.
R.C.C. work with cement approved course sand and 2cm gauge approved stone gritt in proportion of 1:1.5:3 in slab excluding supply of reinrorcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including nes(S.I. No. 289)
Mild steel or iron in plain work such as reinforcement concrete or reinfoced brick work (when not included in an over all rates )wrought to required shape as nesessory including bending for proper completion of work and including supply of all steel.
S/Fixxing of Granyte stone with B/work,plaster and diging Lettres on stone for Innogration/Lokarpan i/c all comp of work
Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle Iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of peir MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective 'sheet conforming to Type-IV of ASTM. D 4958-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of govemment report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and Incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm
Vertical Garden
Supply/Fixxing of verticle garden i/c all comp. of work.
Pot frame for verticle gardening (per sqft)
Drip irrigation system(per sqft)
Out put verticle garden in coco pit(per sqft)
complete instalation and finishing all comp. of work (per sqft)
Earth work in Excavation all comp. of work .
Concrete with 4 cm . Gauge brick Ballast fine sand of 1.25 F:M. and cement in Proportion of 12:6:1 in foundation and under floors including supply of all meterials , labour and T&P etc required for proper completion of work.
R.C.C. work with cement approved course sand and 2cm gauge approved stone gritt in proportion of 1:1.5:3 in slab excluding supply of reinrorcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including nes(S.I. No. 289)
Mild steel or iron in plain work such as reinforcement concrete or reinfoced brick work (when not included in an over all rates )wrought to required shape as nesessory including bending for proper completion of work and including supply of all steel.
S/Fixxing of Granyte stone with B/work,plaster and diging Lettres on stone for Innogration/Lokarpan i/c all comp of work
Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle Iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of peir MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective 'sheet conforming to Type-IV of ASTM. D 4958-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of govemment report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and Incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm
Mild steel or iron work of Fabrication of grill and stair case ralling small an over all rates) wroughts to Required form, including of supply of steel , bolts ,nuts and wastage etc. and there fix.S.I No. 502©
S/fixxing of LED Focus Light for mahamagandhi painting i/c all comp. of work.
M/s N.A. Construction
M/s Chandrabhan Singh
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .