DIFFERENT TYPE OF ELECTRICAL WORKS IN SYSTEM IMPROVEMENT SCHEME UNDER EDD-I BULANDSHAHR AND EDD-IV, SYANA.

Amount

PART-A (EDD-I, SIKANDRABAD)

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

63 KVA Transformer

100 KVA Transformer

250 KVA Transformer

ACSR DOG

LT XLPE CABLE 1X400 SQMM

LT XLPE CABLE 1X630 SQMM

LT XLPE CABLE 1X1000 SQMM

11 KV VCB (I/C+O/G)

ACSR WEASEL

OTHER LINE MATERIAL

AB Cable (3x50+1x35+1x16) sq mm

AB Cable (3x95+1x70+1x16) sq mm

AB Cable (3x120+1x95+1x16) sq mm

LT PVC CABLE 3.5X150/70 SQMM.

The following meterial Erection & Fixing as per RESPO manual and as per direction fo Supervising Engineer. It includes the cost of labour, T&P, Carrier etc. required for proper completion of work.

63 KVA Transformer

100 KVA Transformer

250 KVA Transformer

ACSR DOG

LT XLPE CABLE 1X400 SQMM

LT XLPE CABLE 1X630 SQMM

LT XLPE CABLE 1X1000 SQMM

11 KV VCB (I/C+O/G)

ACSR WEASEL

AB Cable (3x50+1x35+1x16) sq mm

AB Cable (3x95+1x70+1x16) sq mm

AB Cable (3x120+1x95+1x16) sq mm

LT PVC CABLE 3.5X150/70 SQMM.

Providing and fixing of following material-

STAY SET COMPLETE

CLAMP WITH NUT BOLT

PRC CLAMP

11 KV X ARM 'V' TYPE

TEE OFF CHANNEL 100X50X1300 MM

EARTHING COMPLETE

CONCREATING OF POLE

STP 11 MTR LONG SP 55 GI BOTTOM

PCC POLE 8.5 MTR

DANGER BOARD WITH CLAMP

BARBED WIRE

630 SQMM LUG ALUMINIUM

400 SQMM LUG

1000 SQMM LUG

WATER LEVEL EARTHING 50 FEET 2" PIPE GI

PLINTH AND FENCING AS PER RESPO SPECIFICATION

AL BUS BAR 5X305 MM

NUT AND BOLT

F CLAMP

GI WIRE 8 SWG

SUSPENTION CLAMP WITH I HOOK

DISTRIBUTION BOX WITH CLAMP 3 PHASE

GUARDING ANGLE 65*65*9 MM

GI WIRE 6 SWG

CONCREATING OF STAY

GI WIRE 10 SWG

11 KV PIN INSULATOR POLYMERIC

11 KV DISK INSULATOR POLYMERIC

TOP CHANNEL 100X50X2240

CROSS BRACING SET

MS ANGLE 75X75X5 MM

Carriage of fallowings matarial after dismantalling from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

100 KVA Transformer (old & Used)

63 KVA Transformer (old & Used)

25 KVA Transformer (old & Used)

AB Cable (Damaged/Scrap)

11 KV VCB (SCRAP/OLD AND USED)

fufonknkrk }kjk mijksDr lkexzh DISCOM ds }kjk vuqeksfnr G.T.P. ds vuqlkj gh Ø; dh tk;sxhA

PART-B (EDD-SYANA)

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

400 KVA Transformer

250 KVA Transformer

LT XLPE Cable 3.5x240 sq mm

AB Cable (3x120+1x95+1x16) sq mm

11 KV (3X185) sq mm XLPE Cable

The following meterial Erection & Fixing as per RESPO manual and as per direction fo Supervising Engineer. It includes the cost of labour, T&P, Carrier etc. required for proper completion of work.

400 KVA Transformer

250 KVA Transformer

LT XLPE Cable 3.5x240 sq mm

AB Cable (3x120+1x95+1x16) sq mm

11 KV (3X185) sq mm XLPE Cable

Making of Plinth 250 KVA Transformer.

Earthing of 250 KVA T/F water level

Fencing of 250 KVA T/F

Carriage of fallowings matarial after dismantalling from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

100 KVA Transformer (old & Used)

250 KVA Transformer (old & Used)

AB Cable (3x120+1x95+1x16) sq mm (Damaged/Scrap)

11 KV (3X185) sq mm XLPE Cable (Damaged/Scrap)

The following material is required to be supplied by the contractor.

Nut & Bolt with Washers All Sized

Dad end Clamp with i-hook (insulated)

Suspention Clamps with i-hook (insulated)

fufonknkrk }kjk mijksDr lkexzh DISCOM ds }kjk vuqeksfnr G.T.P. ds vuqlkj gh Ø; dh tk;sxhA

All work will be done as per UPPCL/RESPO Rules.

NEHA ENTERPRISES