SPECIAL REPAIR / REPLACEMENT OF OFFR MARRIED ACCN AND OTHER SANCTIONED WORKS AT NAMS.

Amount

Taking down shutter of any description exc 1.0 sq.m but n exc 2 sq.m each and after easing and repair the shutter refixing in same opening complete all as specified and directed.

Taking down cement plaster on brick or stone walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:6 on brick work or concrete surface finish even and smooth (w/o using extra cement) complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finish even and smooth (w/o using extra cement) including WPC @3% by weight of cement complete all as specified and directed.

M&L, Rendering 5mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement all as specified and directed.

M&L preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over 2 mm thick averaging wall care putty and making the surface finish even and smooth complete all as spcified and directed.

M&L preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick averaging wall care putty and making the surface finish even and smooth complete all as specified and directed.

M & L three coat of white wash incl preparation of new plaster surface of ceiling all as specified directed.

All as per item No. 9 here in before but one coat on old surface as on ceiling.

Material and labour for preparation of new plastered surfaces applying, one coat of wall primer and two coats of Exterior weather proof Emulsion paint applying by Mechanically spray gun machine /manualy directed by Engr-in-Charge complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding removing serviceable tiles to stone and rubbish off the premisses complete all as specified and directed.

M&L Vitrified ceramic tiles light shade double charge 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and incl 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed.

S&F Glazed ceramic colour tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick cement plaster in CM 1:6 complete all as specified as directed.

M&L 16 to 18 mm thick granite single piece in form of slab for cooking platform with machine cut flooring incl 15mm thick cement mortar 1:4 set and jointed in neat cement slurry and pointed with coloured cement mixed with pigment to match the shade in slab ,st and wall incl cutting rubbing and polishing incl nosing to the edge of granite stone slab incl hole for gas pipe complete all as specified and directed .

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(gauged and glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S & F in repair mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 incl 12mm square guard bar 10cm c/c and two coat of synthetic enamel paint over one cost of primer complete including taking down of old ventilator complete all as specified and directed. all as specified and directed.

S&F 35 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side Including taking down old doors complete all as specified and directed.

S & F 35 mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauze, etc. (Without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR part-I, saection 8, clause 8.24 incl taking down old doors complete all as specififed and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing including taking down old doors complete all as specified and directed

M&L for 18 mm thick shutter board pre laminated of approved shade in cup board shelve as in kitchen complete all as specified (Make / shade / design / size as approved by Enginner -in-Charge)

M&L, 18 to 22mm thick shutter one side pre laminated particle board of approved shade in kitched cup board shutter etc incl piano hinges, aluminium handle 02 Nos 100mm long,haps and staple 100mm long and magnetic catcher and,leeeping incld taking down old boards complete all as specified (Make / shade / design / size as approved by Enginner -in-Charge)

S & F 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane complete all as specified and directed.

All as per item no 24 here in before but fixed in repair.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

All as per item no 26 here in before but fixed in repair.

S & F aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section complete all as specified and directed.

S&F butt hinges 100mm long medium weight cold rolled mild steel fixed with steel screws complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section with bright bolt complete.

S&F in repair, 300 mm ordinay rat tail rod pattern springs incl roller and rubber plate fixed to chowkhats and necessary welding if reqd complete all as specified as directed.

S&F 200mm aluminium handle cast type anodised complete all as specified as directed.

S&F in repair floor door stopper 140mm of aluminium alloy body and touge anodised, with hard drawn steel spring fixed and complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new and previously un-treated steel and iron surfaces of any description, not otherwise described exc 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation of old wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F 15mm bore medium grade galvanized steel tubing with all fitting and fixed to walls, celling or in floors incl cutting chases for concealed water tubing not exc 10cm width and girth incl making good in CM1:3 incl taking down old pipes complete all as specified and directed.

S & F 20mm bore medium grade galvanized steel tubing with all fitting and fixed to walls, celling or in floors incl cuuting chases for concealed water tubing not exc 10cm width or girth incl making good in CM 1:3incl taking down old pipes complete all as specified and directed.

S&F in repair PVC connection 15mm bore and 450mm long complete all as specified and directed.

S&F cast copper alloy 15mm bore basin mixer without stopcock waste system with braided hoses 450mm long braided hases with capstan headed cromium plated screwed down high pressure screwed for iron pipe. including taking down old pillar tap/mixer complete all as specified and directed.

S&F in repair wall mixer 3-in-1 system with provision for bath overhead shower 15mm bore (fancy type) cast copper alloy with capstan head, CP screwed down high pressure with long screwed both ends for iron pipe union complete all as specified and directed.

S&F in repair 15mm bore bib tap cost copper alloy CP fancy type long body with crutch or butterfly handle screwed down screwed to iron pipe complete.

S&F for rotational moulded polythene 500 litres water storage tank white, triple layer cylindrical vertical with closed top hoisted and fixed in position inclusive 20 mm dia float valve with aluminium fitting. All as specified and directed including old disconnecting and taking down complete all as specified and directed.

S&F Health Faucet hand shower with 8mm dia 1mtr long flexible tube wall hook complete all as specified and directed. CAT No ALD-CHR-573 of Jaquar or equivlaent of Hindware / somany

S&F in repair 15mm bore angle cock/stop cock cast copper alloy CP fancy type of long body screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete.

S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S&F in repair CP Tubular towel rail 20mm dia ,D type ,600mm long between flange complete all as specified and directed.

S&F in repair CP grating round 140 mm size of PTMT (min wt 50 gms.)

S&F, Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long.complete all as specified and directed by Engr-in-Charge.

ditto all as above item butt corner shelf with two corner straight of length 250 mm and ane side circular complete all as specified and directed by Engr-in-Charge.

Supplying and fixing in repair vitreous china wash down water closet (padestal pattern) white With flush pipe for low level flushing cistern including plastic water closet seat cover white with jet, close pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed .

S&F in repair for Vitreous china squatting pan of (Orisa Pattern) size 580 x 440 mm white with ‘P’ or ‘S’ trap front or back inlet and integral foot rest (excluding flushing cistern and flush pipe) including cement concrete bedding as required set complete all as specified and directed.

S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed.

S&F in repair Vitreous china wash hand basin white flat back size 550x400mm including brass waste coupling, PVC waste pipe and plug and porcelain stopper brackets of angle 35x35x5mm and cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F in repair sinks made of stinless steel 1 mm thick kitchen or laboratory with drainage board of size 915 x 460 mm with plugs, washers and wastes; incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm and connecting union to pipe, bowl size 410 x 330 x 160 mm complete all as specified and directed.

M&L, kota stone slab flooring 18 to 20 mm thick of size ( 600 x 600) over and incl cement screed base laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing incl chamfering edge splays complete all as specified

Description all as per item no 58 here in before but in riser of steps ditto

S&F in repair stainless steel plate rack overall size 90x75 cm weight not less than 7.00 kgs for each, made out of 0.63mm thick steel sheet as per standard pattern fixing to walls with screwed complete all as specified and directed.

S&F in repair brass chromium plated pressure adjustable shower rose 125mm size fancy type with revolving joints incl shower arm 190mm and fixing to steel pipe or union complete all as specified and directed.

Supply and fixing, pillar taps fancy cast copper along with capstan heads chromium plated swan neck screwed down high pressure with or without coppered H or C with screwed shanks and fly nuts screwed for iron pipe size 15mm fixed in repair .

Supply and fixing, in repairs PVC mirror cabinet with shelves of best quality including fixing arrangements size 350x450 mm complete all as specified and directed.

S&F in repair 100mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors in repairs.

S&Fin repair 100mm cast iron bends diminishing pieces or tapers complete all as specified and directed.

S&F in repair 75mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with clamps complete all as specified and directed.

S&F in repair 75mm cast iron bends diminishing pieces or tapers with oval access oval in repair all as specified and directed

S&F rotational moulded polythyene triple layer 1000 litrs water storage tank white cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting. All as specified and directed including old disconnecting and taking down complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of eight 3 kfg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

M&L, Rendering 10mm thick in CM 1:3 including WPC in sunken slab complete all as specified and directed.

M&L, APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M&L,for cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in mass filling in sunken floor complete all as specified .

M& L for applying evenly a tack coat of industerial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.3Lit/Sqm incl cleaning surfaces etc complete all as specified and directed

S&F in repair 40mm dia 450mm long GI for Spout pipe incl necessary cutting of existing beam/slab complete all as specified as directed.

M&L framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and welding if reqd for fitting and fixture including taking down chowkhat and fiixing holdfast with PCC 1:2:4 type B1 using 12.5 graded stone aggregate complete all as specified and direcetd.

S&F in repair mild steel powder coated curtain rods 20mm dia of approved quality incl bracket, knobs etc complete all as directed, by Engr-in-Charge.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry and pigment complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls with clamp complete all as specified and directed.

M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in leveling cource in roof finishes even and smooth without using extra cement incl cleaning of algae /dirt with wire brush before treatment complete all as specified as directed.

M&L for applying two coat of undiluted thick water based UV resistant elastorneric Polyurethane liquid membrane with UV resistance properties and solar refelctive properties of 109 over one coat of primer (1:3, Dilution:water) Note: Every each coat interval between 6 hrs) ,having solid content more than 80% and elastic recovery @150% elongation %---70 to 75 . complete all as specified and directed.

Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit not less than 20mm dia 1.5mm thick for one light / fan point point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick heylam sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed for the following :- Note : (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed.

All as per srl item No 82 here in before but one 3 pin socket out let 5 Amps on independent board

All as per srl item No 82 here in before but one 3 pin socket out let 5 Amps on same board.

All as per srl item No 82 here in before but one light point controlled by 2-way switch.

M&L for Point wiring with 2.5 Sqmm copper conductor cable FRLS (Multistranded ) PVC insulated and unsheathed cable in and incl PVC conduit concealed with pressed steel terminal boxes of adequate size with 3mm thick plastic laminated sheet cover for one 3 pin socket out let 15 Amp on independent board including continueous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed Cable earth wire to common earth dolly complete all as specified.

Supply and Fixing of switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing of switch piano type 6 Amps Two way 230 volts AC complete all as specified and as directed

Supply and fixing of bell push flush type single pole one way 5 Amps complete all as specified and directed

Supply and Fixing of socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing of socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing ceiling rose 65X50 mm two to three terminals complete all as specified.

S&F lamp holder insulated body with back plate angle type for batten fitting with 10 Watt LED Bulb 230V AC cool day light complete all as specified.

Supply and fix for fan regulator electronic flush type stepped (rotary type) speed control 200 Watts complete all as specified and directed

Supply and fix for electric bell multi musical type, AC single phase 220 volts, complete all as specified and directed

Supply and fixing LED T-8 tube light fitting with single side connection LED tube rod 18/20W 4 feet 1 x 18/20 watt MS CRCA box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

S&F in LED mirror fitting. 1x8w, 230v Energy efficient , Industrial Box type, housing with reflector cover channel, bipin holders, connector block, etc. complete with tube rod LED 8 watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-Charge.

Supplying and fixing LED bulk head light fittings 10watt white including LED lamp as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrers and shutters including making and finishing good hole including fixing of required nut ans bolts in wall for fixing Exhaust fan of 300mm sweep, necessary brick work and plaster to match the existing surface complete all as specified.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 240 Volt, 50Hz AC supply for 8 way. fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as specified.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 240 Volt, 50Hz AC supply for 12 way. fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as specified.

Supply and fix in replacement for MCBs Double pole (DP) 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix in replacement for MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix in replacement for MCBs single pole (SP) 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, Pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregated), 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT steels bars @ 100 mm C/C both ways with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc, including testing on completion complete all as specified and as directed. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply & fix in replacement of LED Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. Complete all as specified and as directed.

Supply and fixing in replacement of bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing with nut & Bolt etc for security light all as specified vand direceted.

Supply and fixing ceiling fan 1200mm Sweep copper winding high speed, Aluminium body with blade, double ball bearing of BEE star rated Including all acessories connector, canopy, Hanging Rod and clamps , including electric connection with pvc flexible twin core copper wire from ceiling rose to ceiling fan complete all as specified and directed

Supply and fixing geyser 25 Ltrs capacity, BEE 5 Star rated , after connecting electric and water connection and screwing nut and bolts to fixed on wall and make surface complete all as specified and directed.

Supply and laying in repair in trenches or fixing or passing through pipe,1100 volt grade heavy duty cable with XLPE insulated aluminium conductor ,served with an inner sheathing of PVC tape armoured with galvanised steel of size 50sq mm X 3.5 corestranded conductor,complete all as specified and directed by Engr-in-charge

S&F DWC high density polyethelene pipes having dia 63mm/50mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930 (Part-I & II) for protection of underground cable laid along pole/ along wall / in PCC on GL/ Roof and including all fittings as required at site complete all as specified and as directed.

Excaving trenches not exc 1.5m wide and not exc 1.5 mtr deep and getting out in any type of soil complete all as specified and directed .

Returning filling in (soil) including spreading levelling, watering and well ramming in layers not exc 25 cm thick all as specified and directed by Engineer -in-charge.

Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.

Material and labour for Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way including MCCB 125 amps, 415 Volts, 50 Hz AC 16 ka 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified . Note :-Outgoing MCB,s Shall be measured and paid seperately in relevant item complete all as specified and directed

M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc complete all as specified and directed.

M&L for brick work with locally available sub class ‘B’, old size, best quality bricks, in 1/2 brick thick honey comb walling built in cement mortar ( 1:6) complete all as specified and directed

M&L for loose filling of brik bats gauge of 80 t 150mm in sokage pit etc and raising (or lowering )to be required levels complete all as specified and directed

M&L for PCC (1:4:8) D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified and directed

M&L PCC 1:2:4 type B1 (using 20 mm graded stonr aggregete) as in coping,benching foundation filling etc complete all as specified and directed

M&L for providing 50 mm thick cement concrete (1:3:6) type CI using 40mm graded stone aggregate as in plinth protection/pathway surfaces even and smooth without using extra cement complete all as specified and directed

M&L for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement including forms, moulds end etc complete all as specified and directed

M&L for pre cast RCC (1:2:4) type B1(using 20 mm graded stone aggregate). as in cover slabs and set in cement mortar 1:4 including necessary form work and moulds complete all as specified and directed.

M&L for pre cast RCC (1:2:4) type B1(using 20 mm graded stone aggregate). as on slab, floors ,beams.roof landings ,canopies ,desk slab and inshelves and the like complete complete all as specified and directed

S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0 complete all as specified and directed.

.Ditto as per item no 131 here in before but 6 to 8 mm dia.

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs complete all as specified and directed.

M&L for Reinforced concrete pipes 300 mm dia class NP3 laid and jointed compleate with collers complete all as per specified and directed

Ditto as per item no 134 here in before but 150 mm dia complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 150 mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 300 mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coats of Cement base paint of shade as approve over a coat of cement primer on wall complete all as specified and directed.

S&F in repair cast iron cross tee, 100 mm dia equal or unequal fixed with lead joint complete all as specified and directed.

S&F in repair cast iron floor trap, 100 mm dia with grating for outlet including jointing to waste pipe, fixed with cement concrete 1:2:4 type B1 and making good complete all as specified and directed.

Roop Sons and Co

M/s Vijay Construction Co.

Santokh Singh and Associates

tarvinder singh