Loading
Loading…
Loading…
Tender Value
₹2.9 L
EMD Value
₹5,800
Closing Date
9 Sept 2026, 11:00 amClosed
AGM WSD SJPNL Us Club Shimla 171001
AGM WSD SJPNL Us Club Shimla 171001
Providing Laying Jointing in trenches GI Pipe line of 80 mm dia from Namkeen factory to Mehta Niwas Ward No 24 Sangti Sanjauli Shimla HP
2026_SJPNL_142599_1
3614 dated 01/09/2026
Open Tender
Civil Works
Item Rate
90 days
Shimla
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹5,800
15 Sept 2026
2 Sept 2026
9 Sept 2026
2 Sept 2026
9 Sept 2026
2 Sept 2026
2 Sept 2026 - 9 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work,jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts. | 64.8 | Cum | - | - |
| 2Providing Laying and jointing in trenches galvanised mild steel tube (Medium grade) of following diameters conforming to IS-1239 as specified below jointed with butt welding according to relevant BIS code 816-1969 including all short pieces bends,tee and other specials etc. made from parent tubes as applicable for the particular reach and of approved specifications as per site conditions including flushing, cleaning and hydraulic testing complete to the best satisfaction of the Engineer-in-charge. The laying of pipes should conform to BIS code 5822-1970 within all leads and lifts complete in all respect. | |||||
| 2.01 | 80 mm dia. | - | Rmt. | - | - |
| 3Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. | |||||
| 3.1 | Take 25 mm dia as an average size. | - | Each | - | - |
| 4Making connection of galvanised steel distribution branch with galvanised mild steel main 50mm to 80mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. | |||||
| 4.1 | Take 65 mm dia as an average size. | - | Each | - | - |
| 5Providing and fixing double flanged cast iron sluice valve of PN 1.60 of Kirloskar/Leader of various dia and capable of with standing the normal seat pressure as per IS:14846 with upto date amendment complete in all respect as per the direction of the Engineer-in-charge. | |||||
| 5.1 | 80 mm dia . | 2 | Each | - | - |
| 6 | Providing and laying cement concrete work 1:2:4(1 cement: 2 sand: 4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge:- In foundation & plinth. | 4.2 | Cum | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.47 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.40 MB
From6.pdf
Tender Documents • 3.66 MB
From8.pdf
Tender Documents • 1.92 MB
NIT.pdf
Tender Documents • 0.38 MB
Tc.pdf
Tender Documents • 0.31 MB
Undertaking.pdf
Tender Documents • 0.04 MB
BOQ_211858.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .