Beautification of Powai Lake by Developing light and sound show in the form of Musical Fountainon situated at Powai

Amount

Nozzles & accessories, Supplying, Installing, Testing and commissioning of different type of nozzles and equipment with steel pipes and accessories with required fittings as per design & Drawing, variation in patterns & design +/-5%. b). 3D Digital Fountain nozzle with swing motor (Mat-SS 304 & AI Conn size DN 40) - 10m Height

Supplying & Installation of 2 Hp mono submersible pump with wide area suction strainer with stainless steel mesh cover.

Supplying & Fixing of LED Lights (RGB) - 54 Watts 24 Volts with IP 68 protection in Polymer construction. LED water proof luminairs with array of high output of LEDs housed in compact enclosure. Provided with toughned glass with Elastomeris seal. Special plastic cable gland compact socket head fastners and mounting bracket all share be of stainless steel.

Supplying, erecting, testing and commissioning of flat flexible 3 core 1.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete

2C X 1 sqmm Communication shielded Cable

Junction Box (Transperent in Front) - MOC P C

Supplying & Installation of Base frame structure for 3 Hp & 2 Hp mono submersible pumps with necessary HDPR floats.

Supplying & Installation of Base frame structure for 5 Hp mono submersible pumps with necessary HDPR floats.

Nozzles & accessories, Supplying, Installing, Testing and commissioning of different type of nozzles and equipment with steel pipes and accessories with required fittings as per design & Drawing, variation in patterns & design +/-5% g). Vertical Jet- SS304 (AF 50-14)-Arching Jet (10m Height)

Nozzles & accessories, Supplying, Installing, Testing and commissioning of different type of nozzles and equipment with steel pipes and accessories with required fittings as per design & Drawing, variation in patterns & design +/-5% d). Vertical Jet (AF 65-20)- Tall Jet (20m Height)

SITC DMX Converter with USB 2.0 support with status LED 1500 V full isolation RDM enabled + Input or output mode internal frame buffer for stable DMX generation supports a huge range of commercial and free software with 5 years comprehensive warranty.

Supplying and installing LSZH sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC

Nozzles & accessories, Supplying, Installing, Testing and commissioning of different type of nozzles and equipment with steel pipes and accessories with required fittings as per design & Drawing, variation in patterns & design +/-5% e) Vertical Jet (AF 25-10)- Changing Jet (12m Height)

Supplying & Installation of 5 Hp mono submersible pump with wide area suction strainer with stainless steel mesh cover.

Supplying & Fixing of Solenoid Valves for underwater application with 24 Volts coil. Material of construction : Stanless Steel

Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete

2C X 1 sqmm Communication shielded Cable

Junction Box (Transperent in Front) - MOC P C

Supplying & Installation of Base frame structure for 5 Hp mono submersible pumps with necessary HDPR floats.

Nozzles & accessories, Supplying, Installing, Testing and commissioning of different type of nozzles and equipment with steel pipes and accessories with required fittings as per design & Drawing, variation in patterns & design +/-5% c) Vertical Jet (AF 80-27) Central Jet (25m Height)

Excavation for foundationin earth,soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundationan necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation forfoundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth/murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Providing and laying Castin situ/ Ready Mix cement concrete in M-10 of trap /granite /quartzite /gneissmetal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finishis to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Castin situ/Ready Mix cement concrete M-25 of trap /granite /quartzite /gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excludingr einforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Castin situ/ Ready Mix cement concrete M-25 of trap /granite /quartzite /gneissmetal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surface swith cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneissmetal for R.C.C. beams and lintelsasper detailed design sand drawings or as directed including steel centering, formwork, coverblocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).

Providing and laying Cast in situ /Ready Mix cement concrete M-25 of trap /granite /quartzite /gneissmetal for R.C.C. slabs and landing sasper detailed designs and drawings including steel centering, formwork, coverblocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintel spardis, copings, fins, arches etc. asper detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing first class Burnt Brick masonry with conventional /I.S. type brick sincement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 one xposed face and watering etc. Complete.

Providing cement based water proofing treatment to terraces (Indian waterproofing or a like) with brick batslaid in requiredslope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved waterproofing compound and laying the brick batson bottom layer in C.M. 1:5 admixed with approved waterproofing compound filling up to half depth of brickbats, curing this layer for 3days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved waterproofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surfaces mooth with cement slurry admixed with approved waterproofing compound. Marking finished surface with false squares of 300mmx300mm. making the junction sattheparapet rounded and tape red top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing internal cement plaster 12 mm thick in single coatin cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc.

Providing and laying hand cut polished Kotah Stone flooring 25 mm to 30 mm thick and 30 cm wide in plain /diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing thesurface. (excludingprimercoat) etc. complete.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or waterby 15 to 20% allowing to dry for 6 to 8 hours Afterapplying acrylic wallputty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1 stcoat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with watercontent 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)

Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two track swithrectangular pipe having over all dimension 63.50x38.10x1.02 mm at weight 0.547 Kilogram/OneRunningMetre. and window frame bottom track section 61.85x31.75x1.20mm at weight 0.695 Kilogram/OneRunningMetre. Top and side track section 61.85x31.75x1.30mm at weight 0.659 Kilogram/OneRunningMetre. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417 Kilogram/OneRunningMetre. Inter locking section 40x18x1.10mm at weight 0.469 Kilogram/OneRunningMetre. And handle section 40x18x1.25 mm at weight 0.417 Kilogram/OneRunningMetre. and top section 40x18x1.25 mm at weight 0.417 Kilogram/Runningmetre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastening ssuchasroller bearing in nylon casting and self locking catch fitted invertical section of shutter including 5mm thick plaing lass with all required screw sandnuts etc, complete.Withcolour Anodising with box.

Providing and fixing rolling shutter fabricated from steell at hs of minimum thickness 0.9mm with lockplate of 3.15mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolt sand handles for bothsides, deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fastarr angements, M.S. racketplate 300x300x3.15mm minimum size and shape with squarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of wormgear wheels and worm sofhigh grade cast iron or mild steel and on eco at of redlead primer etc. Complete.(I.S.62481979) (Withoutmechanical gear)

Providing and fixing mild steel grill railing weighing 15 Kilogram/One Square Metre. with teakwood handrail of size 75mm.x60mm. and sil l75mm.x25mm. and posts for verandah including fabricating, fixtures,erecting and painting the grill work with one coat of anti corrosive paint and two coats of oil paint and polishing the grill, hand rail with French polish. Spec. One Number : Bd.U.3

Providing and erecting chain link fencing 1.6M. height with G.I. chain link of size 50x50mm,8 gauge thick and fixed 75mm above ground level on vertical M.S. Angles of 40x40x6mm size, includin d excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450x450x670 mm. at 1.75M .c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cmc/cw ithnut sand bolt sand horizontal M.S. Angles at top and bottom of 25x25x5mm size and vertical M.S. flat 35x5mm and 25x5 mm horizontal including cross support of 40x40x6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x 670 mm including 3 coats of oil painting etc. complete.

Providing & Fixing in position, MS fabrication work using angles, sqrtubes, c channel set c for various partition frame as per Design & Instructions & Complete inallaspects. including all materials labour,finishing etc complete

Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick, decorative type of exterior grade,as per detailed drawings, conforming to I.S.:2202–1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stain lesssteel fixture sand fastening, stopper sand finishing with french polishing etc. (Excluding door frame) (Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter

Excavation forfoundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth/murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Providing and laying Castin situ/Ready Mix cement concrete M-25 of trap /granite /quartzite /gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excludingr einforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Castin situ/ Ready Mix cement concrete M-25 of trap /granite /quartzite /gneissmetal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surface swith cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintel spardis, copings, fins, arches etc. asper detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing cement based water proofing treatment to terraces (Indian waterproofing or a like) with brick batslaid in requiredslope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved waterproofing compound and laying the brick batson bottom layer in C.M. 1:5 admixed with approved waterproofing compound filling up to half depth of brickbats, curing this layer for 3days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved waterproofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surfaces mooth with cement slurry admixed with approved waterproofing compound. Marking finished surface with false squares of 300mmx300mm. making the junction sattheparapet rounded and tape red top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing first class Burnt Brick masonry with conventional /I.S. type brick sincement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 one xposed face and watering etc. Complete.

Providing internal cement plaster 12 mm thick in single coatin cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc.

Providing and laying hand cut polished Kotah Stone flooring 25 mm to 30 mm thick and 30 cm wide in plain /diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and erecting chain link fencing 1.6M. height with G.I. chain link of size 50x50mm,8 gauge thick and fixed 75mm above ground level on vertical M.S. Angles of 40x40x6mm size, includin d excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450x450x670 mm. at 1.75M .c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cmc/cw ithnut sand bolt sand horizontal M.S. Angles at top and bottom of 25x25x5mm size and vertical M.S. flat 35x5mm and 25x5 mm horizontal including cross support of 40x40x6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x 670 mm including 3 coats of oil painting etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing thesurface. (excludingprimercoat) etc. complete.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or waterby 15 to 20% allowing to dry for 6 to 8 hours Afterapplying acrylic wallputty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1 stcoat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with watercontent 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)

Providing & Fixing in position, MS fabrication work using angles, sqrtubes, c channel set c for various partition frame as per Design & Instructions & Complete inallaspects. including all materials labour,finishing etc complete

Providing and fixing Mangalore tiled roofing with class 'AA' tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc. complete (Excluding ridge and hip tiles)

Providing and fixing collapsible steel gate in one / two leaves with hot rolled verticalchannels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T orE section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner ofminimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fittedwith snap headed rivets of minimum size 6 mm max. spacing of vertical channels be100 mm enclosed gate position and clear space of 150 mm between two sets ofcrossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coatof red lead primer and oil painting etc. complete. (I.S. 105211983)

Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF

Supplying and erecting copper strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 100 mm height with required standard accessories.

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 240 to 300 sq mm., with necessary material as per specification no. CB-JT/LT

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness upto 3.3 kV

Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for 4 pole incoming 400A (800 A), 12 ways 4 pole outgoing, up to 100A MCCBs on iron frame, as per specification no. SW-MCCBPB. (Excluding MCCBs)

Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 400A (1000 A) incoming and 12 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.

Supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four aluminium bars, 500V 800A having 100mm ( width) x 5 mm (thickness), with 99.9 % aluminium purity as per E91E grade & current density 0.8 A per sq mm compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC insulators and accessories of suitable rating and two nos of separate earthing terminals complete as per specification no. CP-BB

Providing & erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.

Providing & erecting 3 Pole MCCB, 415V, 800A, rated short-circuit breaking capacity 50 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB.[For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.] & [In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%.]

Supplying and erecting terminal spreaders suitable for 4 pole, upto 800A MCCB (Set of 8)

Providing & erecting 3 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no.SW-MCCB. [For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.]

Supplying and erecting terminal spreaders suitable for 4 pole, upto 100A MCCB (Set of 8)

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB. [For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.]

Supplying and erecting terminal spreaders suitable for 3pole, upto 250 A MCCB(set of 6)

Providing & erecting 3 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no lineload bias in provided enclosure/panel as per specification no. SW-MCCB. [For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.]

Providing & erecting 3 Pole MCCB 415V, 320A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB [For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.]

Supplying and erecting terminal spreaders suitable for 3pole, upto 400A MCCB (set of 6)

Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB.[For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.]

Supplying, fixing and commissioning 4 pole RCBO up to 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCBO.

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO

Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways/36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no.SW-MCBDB

3 Noss. single core Cu PVC insulated flexible cable of 240 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for neutral of 150 Sq.mm for 400 Amp. TPNSS switch.

3 Noss. single core Cu PVC insulated flexible cable of 185 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for neutral of 95 Sq.mm for Neutral for 300/315/320 Amp TPNSS switch

3 Noss. single core Cu PVC insulated flexible cable of 150 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for neutral of 70 Sq.mm for 250 Amp TPNSS switch.

3 Noss. single core Cu PVC insulated flexible cable of 95 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for neutral of 50 Sq.mm for 200 Amp TPNSS switch.

3 Noss. single core Cu PVC insulated flexible cable of 50 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for Neutral of 25 Sq.mm for 100/125 Amp. TPNSS switch.

3(PH) Noss. single core Cu PVC insulated flexible cable of 25 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for neutral of 10 Sq.mm. for 63 Amp TPNSS switch.

1.1 kV grade 4 Noss. (3P+N) copper conductor flexible cable of area 6.0 sq mm and 1Nos. (E) 2.5 sq. mm copper cable for 30 /32 Amp. three phase switch.

1.1 kV grade 4 Noss. (3P+N) copper conductor wires of area 4.0 sq mm and 1Nos. (E) 2.5 sq. mm copper wire for 15 /16 Amp. Three phase switch.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 4 sq. mm. copper conductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB

Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Point wiring for light/bell hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no.WG-HW

Point wiring for ceiling fan hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n caping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no.WG-HW

Point wiring for independent plug, concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WGPW/SW

Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no. WGPW/CW

Supplying and erecting LED square / circular Max. 7W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular Max. 14 W down lighter /Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular Max. 25 W down lighter /Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED Strip light Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 X 20W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S. / steel body suitable to work on 230V, AC supply having top mounting arrangement with SS chain complete and 3 core flexible wire upto 1 mtr with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying and erecting anodized aluminium light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FGODF/SL.

Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC.

Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete

Supplying and erecting 6 to 32A, 10kA, SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Supplying and erecting modular type (two module) electronic step regulator for fan, on provided plate and box with wiring connections complete.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1400 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8, PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W as per specification No. FG-IDF/LED.

Supplying ,installing , testing and commissioning tower type room AC unit of 2.5TR to 2.9TR capacity suitable to operate on 415V, 50 Hz, A.C. supply having 1 no AHU and 1 no cabinet type floor mounting type condensing unit with refrigerant R32/410A & copper condenser coil with anticorrosive fins copper condenser , hydrophilic evaporator fins powder coated outer body ,with scroll/rotary compressor connected with provided refrigerant pipes, electric cables and drain pipe.

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/SAC

Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 litres per hour and storage capacity 80 litres with partially stainless steel body As per specification No.APWCR/ WC

Supplying evaporative air cooler (desert cooler) duct type with galvanised steel sheet with Grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular opening shall be more than fan sweep but not exceeding more than 25 mm, Filter pads shall be made of wood wool or any other substitute placed in non-corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65 dBA at 1 m distance, A three-corecable minimum 2 m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthling operate on 230/250 Volts, 50Hz, normal cooling capacity of 120 cu.m per minute, with 17" exhaust ,min 75 to 80 litres water capacitymtank complete as per specification No. AP-ACR/DAC

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, erecting testing and commissioning Optical Type Smoke Detector on suitable back box with necessary connections complete as per specification no. FF-FAS/SD

Supplying, erecting, testing and commissioning of Conventional Sounder cum Strobe rated at minimum 75 dB @ 3m for Audible annunciation and minimum 75cd flashing at 1 Hz for visual indication.. FF-FAAS/S-ST

F-PROTEKKT ( Fire Suppression Tube ) 2.12 Mtr

F-PROTEKKT ( Fire Suppression Tube ) 1.10 Mtr

F-PROTEKKT ( Fire Suppression Tube ) 0.53 Mtr

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supply & fixing of solenoid valve panels : Made with 2mm thick CRCA Sheet steel Powder Coated with Siemens Gray, and 24 V, 100 A AL Busbar Bus bar with Heat shrink. Indicating Lamps as required Make: ESBEE Current Transformer Make: Kappa/Gupta/Indusree/Equivalent. DMX Controller. 7 V D C & 12 V DC Rectifier Relay Make: PLA with Relay Base Make: Essen, Contactor Make: Eaton

Supplying, erecting, testing & commisioning GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint as per specification no. CP/SH/CR

Supplying, erecting, testing & commisioning self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard

Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB

Supplying, erecting, testing and commissioning of directly operated single phasing preventer complete erected and connected to supply to operate in case of single phasing with guarantee for minimum one year.

Supplying & replacing contactor for DOL motor starter from 7.5 HP to 10 HP.

Supplying & replacing contactor for star-delta motor starter from 15 HP to 25HP.

Supplying and replacing thermal overload relay for motor starter suitable for up to 12.5 HP.

Supplying and replacing thermal overload relay for motor starter 20 HP to 25 HP.

Supplying & replacing timer with combination coil for motor starter suitable from 15 HP to 30 HP.

Supplying and replacing no-volt-coil for motor having DOL starters up to 7.5 HP.

Supplying and replacing no-volt-coil for motor having star-delta starter from 15 HP to 25 HP motor.

Supplying, erecting & marking TP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB

Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Push button ON-OFF

Power Terminals

Control Terminals

Supplying and erecting PVC slotted box trunking of size 25x25mm with accessories on wall/ceiling as per specification no. WG-MA/SLBOX.

Supplying and erecting PVC slotted box trunking of size 45x30mm with accessories on wall/ceiling as per specification no. WG-MA/SLBOX.

Supplying and erecting PVC box trunking of size 50x16/20mm. With accessories on wall/ceiling as per specification no. WG-MA/BOX.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supply, Installation, Testing & Commissioning of InfraRed Analog HD Dome camera, 1/3’’ CMOS image sensor, Fixed Lens: 3.6mm (2.8mm, 6mm & upto 12mm optional lens), Minimum 720 P lines horizontal resolution, IR Range upto 20m,1 channel BNC HDCVI high definition video output, Minimum Illumination: 0.05Lux/F2.0, 0Lux IR ON; Auto(ICR) / Color / B/W filter, Weatherproof Standard : IP67 and etc. to fullfill the requirement.

Supply, Installation, Testing & Commissioning of InfraRed Analog HD Outdoor Bullet camera, 1/3’’ CMOS image sensor, Fixed Lens: 3.6mm (2.8mm, 6mm & upto 12mm optional lens), Minimum 720 P lines horizontal resolution, IR Range upto 20m,1 channel BNC HDCVI high definition video output, Minimum Illumination: 0.05Lux/F2.0, 0Lux IR ON; Auto(ICR) / Color / B/W filter and etc. to fullfill the requirement.

Supply, Installation, Testing & Commissioning of HD Digital Video Recorder: 16 CHANNEL AHD front-end real-time encoding, 2 audio inputs and 1 audio outputs, Simultaneous live viewing, recording, playback, and remote streaming, VGA, HDMI, PTZ, USB Interface. 10/100Base-T Ethernet port for local or wide area network connection, RS485 serial port for serial communication to control movable cameras, Keyboard support including loop-through to other DVR's. 16:9 and 4:3 monitor aspect ratio displays for large-format monitor support. Full-screen, quad and multi-screen display capabilities in live and playback modes. Motion detection. Multiple search modes including smart search (search for motion within recorded images). Pan/tilt/zoom camera control via RS485/PTZ Interface. Local archiving via USB, Local archiving via built-in RW-DVD burner (specific models). Builtin web viewer for remote viewing, playback control, and configuration. Frame Per Second: Minimum 25 FPS. Hard disc : 4 SATA ports(4 HDDs or 3HDDs+1 CD/DVD-RW), up to 16TB, 1 eSATA port (Max 4 SATA HDDs), up to 16TB. As per storage configuration contractor shall consider the seperate harddiscs.

Supplying & erecting 32" professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON

Supplying, erecting, testing & commissioning of 2 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. APUPS( Without batteries)

Supplying and erecting 12 V/100Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete

Supplying, erecting & terminating co-axial copper cable low voltage grade trishielded RG-11 as per specification no. WG-TW

Supplying and erecting PVC insulated PVC round sheathed FR 1 sq.mm (32 no. X 0.20mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV

Supplying, erecting & terminating 5 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage,gauge bandage, medicated ready to use bandage (Bandaid) adhesive tape for medicinal use, scissors, anti-septic solution etc. (All above contents shall be of standard makes

Providing a folding wheel chair of Pioneer Surgicals Brand, model One Number PS809/ equivalent make as per the directions of the engineer in charge.

Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver Paint.

Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S. Rod grouted in wall to a depth of minimum 15cms

Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Supplying and erecting distribution class, 22 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

SITC of LIGHT SIDE MOUNTING FIXTURE - 30-40W, Power Module LED, 3000K, IP 66 Upper part in circular shape & Lower part in "V" shape,both are in single piece made of die-cast aluminum using pressure die casting process. manufacturer name/logo should be embosed on the body. Prismatic/frosted screen in Flat tempered glass. Pure polyester powder coating in customised colour Metallaic Grey. Silicone gasket ensures the IP Rating - IP 66. Height – 500mm,Diameter - 420mm,Weight -8Kgs., Area Exposed to Wind(S) - 0.08 m2 Power LED Module with Company /brand name printed on PCB with the metal core plate. LED Chips of CREE/NICHIA/OSRAM/LUMILEDS or similar make - same should be supported by LED manufacturer's tech sheet . Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection ok 4kV minimum (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PMMA which should offer all the Type II,III,IV & V distribtuions. LED Lifetime >1,00,000hours@Ts 85°C. LM80 report from LED Manufacturer should be submitted. Safety test report as per IEC 60598 from UL/UL authorised/Intertek Lab should be submitted. LM79 report also should be submitted from UL/UL Authorised/Intertek Laboratory. BIS certificate with brand same as manufacturer also should be submitted. Sample should be submitted for approval from concerned engineer-in charge with 5 years comprehensive warranty.

SITC of ARCHITECTURAL 5M POST TOP POLE 5M height post top Pole Made of steel pipe sections 89mm dia.. Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole should be shot blasted for the effective adhesion of 3layer coating so as to avoid the corrosion. The pole should be provided with an inbuilt junction box with 1No. 32A Heavy Duty Stud type connector and 1No. 6A SP MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The pole to be provided with suitable size base plate. This base plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallaic Grey with 5 years comprehensive warranty.

LED type Solar street light fixtures with heat sink for LED, crystalline/ polycrystalline silicon solar PV modules,suitable size of maintenance free battery along with 5.5 mtr , 65mm dia GI pole with civil foundation, base plate, nut , bolts etc and all accessories required for completing installation as per specification. Solar street light of 24 Watt LED

Supplying & fixing Galvanised Manifold with necessary HDPE floats

Supply of special NASA Silicate Based 45 ltr SS Fire Extinguiisher Trolly for High Temperature "Class A Fire"

Operation cost for 5 years

Nozzles & accessories, Supplying, Installing, Testing and commissioning of different type of nozzles and equipment with steel pipes and accessories with required fittings as per design & Drawing, variation in patterns & design +/-5% l) Flame Jet

2C X 1 sqmm Communication shielded Cable

SITC of Medical Grade Copper Tube/Pipes including all type of accessories Like,Tee, Elbow, Valves, etc. complete_Copper Pipes of 12mm OD x 0.7mm thk

Supplying & Fixing of Galvanised header 65 NB x 03 Mrters long with four outlets

Customized theme show with devlopment of show conent for duration of 25-30 minutes. The theme will be given by corporation (MHADA) and based on the same complete musical show shall be produced. The entire program shall be customised. The same can be modified on special occasions. Once the entire show is prepared the same shall be got approved from concerned competent authority. (Engineer-in-charge)

Pneumatic Jet Nozzle (RPJ 45) - SITC of compressed air driven Pneumatic Jet nozzle in SS construction designed for a jet height of approx 40 to 45m as per following or similar specifications with 5 years comprehensive warranty. Material of Constrction : Nozzle SS 304 Air Tank SS 304 Frame SS 304 Dimensions (in mm) 630 x 330 x 830 Nozzle Dia 30 mm Air Intake DN 15 Nett Weight 40 Kg Voltage Solenoid 220V AC Control DMX Medium Fresh Water Protection IP 65 Installtion Above water

SITC of Oil Free Rotary Screw/Scroll/Reciprocating Air Compressor : Oil free Rotary Screw/scroll/ Reciprocating air compressor.It should be 50Hz, 3 Phase, 440volts. 11 Bar, 116 Psig. 50/60cfm or more at 11 Bar. 11 Kw & 15 Hp. The 30/40 cfm flow capacity for each compressor unit having suitable motor rating of Rotary Screw/scroll air cooled compressor. Compressors shall be oil free Rotary Screw/scroll/ Reciprocating compressors suitable for both continuous and frequent start/stop operation at a nominal outlet pressure of 800 kPa (8 bar). The air quality shall be 100% oil free, certified ISO8573-1. The compressor shall have a sound insulating enclosure.

Supplying & Fixing of LED Lights (RGB) - 54 Watts 24 Volts with IP 68 protection in Polymer construction. LED water proof luminairs with array of high output of LEDs housed in compact enclosure. Provided with toughned glass with Elastomeris seal. Special plastic cable gland compact socket head fastners and mounting bracket all share be of stainless steel.

Junction Box (Transperent in Front) - MOC P C

Supplying & fixing Galvanised Manifold with necessary HDPE floats

Supplying & Installation of Galvanised structural frame for water screen with necessary HDPE floats

Supplying & Fixing Centre fed Water Screen of size 09 M X 27 M in Bronze and Stainless Steel construction. Make : Premierworld or equivalent

Supply & fixing anchoring material like steel wire rope & concrete blocks. The rope shall be GI shipping wire rope, 8mm dia. Steel core (IWRC).The rectangular cement concrete blocks of required weight shall be casted uniformly with steel rope holding arrangement in the center. Concrete block shall be at water body base. Lenth of wire rope shall be 1.5 times the maximum depth of water and inbetween appropriate counter weight shall be provided. The arrangement shall be such that it will be floating properly withouut movement irrespective of water level. (for 98 meter span)

Supply and fixing 300 MM wide perfoated Gl cable tray with floating structure and HDPE floats.The suitable size Gl pipes shall be provided for grouting in lake.The frame shall be fabricated from suitable size angles. The joining of indivigual member of tray shall be done with flats. The floating Gl tray shall be connected to firm support with hinged joints.(for 98 meter span)

Supplying & installation of 25 Hp borewell submersible pump with wide area suction strainer with stainless steel mesh cover:

Supplying, erecting, testing and commissioning of flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Rack Mounted Show Controller with Rack Mounted PC

Supply & Installation of Computer intel core i7 Brand : Dell or similar, RAM 16 GBDDR4 Storage 240 GB SSD Graphic card RTX 3060, Windows 11, 24" Monitor with 500 VA UPSTC of desktop computer for operating the show - Computer Core i5, with 4GB graphic card SSD 240 GB, 24 inch monitor,DDR-4, 32 GB

Synchronized Programming of Music Piece (Max.3 Minutes)

Supply & Installation of Video Projector complete with requisite lens for multimedia show 20000 lumens or more, High temperature Full HD WUXGA (1920 x 1200) resolution with 4k enhancement to produce ultra-bright images up to 20000 hours of virtually maintenance free operation. Long throw zoom lens WUXGA 5.27 to 7.41 throw ratio lens shift vertical- 60 percent to +60 percent Horizontal -18 percent to +18 percent.

Supplying, erecting, testing and commissioning of flat flexible 3 core 1.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and installing LSZH sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC

Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete

Supplying, erecting & terminating 5 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete.

Supplying, erecting & terminating HDMI Extender Over RJ45 Ethernet Cable Cat 6, 60m/200ft complete.

Supplying & installation of weather proof enclosure of FRPor equivalent material for projector & lasers. The enclosure of appropriate size for projector and Laser shall be installed inside lake on floating platform. All the joints of enclosure shall be properly sealed. The enclosure shall be provided with lockable opening. The floating platform shall be firmly anchored weights (Concrete blocks) to maintain desired distance.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

2C X 1 sqmm Communication shielded Cable

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete

Supplying and erecting PVC slotted box trunking of size 100x100mm with accessories on wall/ceiling as per specification no. WG-MA/SLBOX.

Supply, Installation, testing, commissioning, performance demonstration of UPS 20kVA with 30 mints battery back-up 3 phase output

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 750 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8bp.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 126.4 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 990 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Note:- 1. For all the engines, the emission standards/norms shall meet applicable pollution control board norms as amended by Government. 2. Mainly adhere to mandatory CPCB 4+ type norms as per Circular issued by Maharashtra Pollution Control Board on 02.06.2023

Supplying & fixing of Laser (RGB), 5 watt with Pangolin Beyond essential FB4. with 60 kbps scanner and 60 degree angle in compact case with forced air cooling.

Supplying & installation of weather proof enclosure of FRPor equivalent material for projector & lasers. The enclosure of appropriate size for projector and Laser shall be installed inside lake on floating platform. All the joints of enclosure shall be properly sealed. The enclosure shall be provided with lockable opening. The floating platform shall be firmly anchored weights (Concrete blocks) to maintain desired distance.

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for Diesel generating set of above 400 kVA upto 500 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per specification no. GEN-AMF. [In case of new DG set, if AMF/SYNC panel is to be used in lieu of standard panel, reduce rate of Item No 11-2-1 to 11-2-23 by 10% of rate of new AMF panel/SYNC panel.]

DISCOM MSEB/TORRENT Charges for Lights/Sound/CCTV

Ripples Engineering Pvt. Ltd.