Provision of one Booster pump with complete accessories at

(a) Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in any type of soil including trimming of tree roots in trenches complete all as specified � 35 Cum (b) Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft/loose soil complete all as specified - 23 Cum. (c) Removing excavation surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m and above the starting point complete all as specified � 12 Cum. (d) M&L for river washed and screened dry sand filling for U/G cable in trenches below ground level for cushioning of cable in ducts near DG set complete all as specified (Note : Only punned thick shall be measured for payment purpose) = 10.50 cum (e) Supply and laying unreinforced pre cast concrete flat cable cover, class LV, type 1 flat size 250 x 150 x 40 mm complete = 850 each (f) Supply and laying under ground cable XLPE LT armoured heavy duty with aluminium conductor of size 16 Sqmm 4 core including taking down old unsv cable � 150 RM (g) M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtrs deep below normal ground level with top edge of earth plate not less than 1.5 mtrs below normal connected to galvanized iron strip 32x6mm as earthing leads by means of galvanized bolts, nuts check nuts and washers of galvanized iron or steel complete with 20 mm dia GI pipe light grade for watering and 40mm dia GI light grade pipe for protection of strip upto test point including test point of strip 50x50x3mm GI, charcoal dust, common salt 15cm all around the earth plate all as shown in electrical plate No 5 of MES SSR Part-I all as specified or indicated and testing on completion including necessary excavation earth work PCC pit and with RCC cover of suitable size water funnel with wire mesh all as directed buy Engr-in-Charge = 2 each (h) Supply and installation, testing and commissioning energy efficient booster pump set cap of 12.5 HP head range 60-90 mtr flow range 228-450 LPM and speed 3000 RPM. Electric driven 415 volts complete all as specified and directed. Make Kirloskar, Model No KDS-1360, Crompton Greaves or equivalent make � 01 No (j) Supply, installation, commissioning and testing of factory made cubical LT feeder pillar box, out door type, powder coated suitable for floor mounting make out of 3 mm thick CRCA sheet with front hinged opening with rubber lining, having flush locking arrangement complete providing sufficient space for cable entry from side suitable incl copper strip 1x4 Nos, 100 amps rating mounting on bush bar insulators for consist of fwg � Incoming MCCB 63 Amp, rating 415 Volts, 4 pole with thermal magnet type 01 No, Voltmeter with selector switch 0-500V � 01 No. Ampere meter 0-50 Amps with CT and selector switch � 01 No. LED indicating lamps RYB- 01 Sets (Set of three). Outgoing MCCB 63 Amp rating 415 Volts, 3 pole with rated insulation voltage 750 volts breaking cap 30 KA 01 � No. Digital ammeter with CTs suitable complete connected with each motor starter � 02 Nos. Supply and fixed fully automatic star delta starter, comprising of power contactor with each motor starter � 02 Nos. Supply and fixed fully automatic star delta starter, comprising of power contactor 3 pole, single phase preventer auto over ride switch timer, relay for over load and including necessary cable connection with PVC insulated but conductors cable from bus bar - 01 set - 01 each