Renovation of Office Space for Studio at BISAG-N office, Ground Floor, MeitY

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Of area 3 sq. metres and below

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge.

UP TO 20 KM D

For thickness of tiles 10 mm to 25 mm

Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry

15 mm cement plaster on the rough side of single or half brick wall of mix with cement and Fine sand- 1:4 (1 cement: 4 Fine sand)

Two coats

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:)

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Second class teak wood

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge

Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete

(Kiln seasoned and chemically treated hollock wood)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with pray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

25 mm nominal dia Pipes

32mm nominal dia Pipes

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

group c

Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.e

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Component Add Modular switch

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm +1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm+1X2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire.

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm +2 X 6 sq. mm earth wire

4 X 10 sq. mm +2 X 6 sq. mm earth wire

4 way (4 + 12), Double door

6 way (4 + 18), Double door

Single pole and neutral

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (Set)

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driverefficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen

printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz. A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/SAC

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid

Rised Flooring (600X600X18 MM)

Supplying and fixing 20 A, Moduler type socket/switch outlet, with 2 pole and earth, on face or in recess, socket out let and complete with Switches, testing and commissioning etc. an required

Supplying and fixing of MS Outdoor Unit (ODU) Stand suitable for 2 Ton Split AC, made of 40x40x5 mm MS angle, painted with two coats of anti-rust primer and one coat of enamel paint, including all required nuts, bolts, washers, and wall anchor fasteners, complete in all respects.

Control & Transmission Wiring Supply, Installation, Testing and Commissioning of control cum transmission wiring of 2 corex 1.25 sq mm copper wire in suitable PVC

Providing and fixing of 9mm thik Eco Board acoustic panel of approved make and color to be fixed with necessary adhesives on 12 mm ply pasted on wall existing partition / wall surfaces as per details provided in the drawings fixed over existing surfaces. Wooden level adjusters shall be used in case of any imperfections in the wall surface. Quoted rates shall include all operations as specified above at all heights and levels, making openings / cutouts for Electrical fixtures, HVAC etc including all tools and hardware all complete as per drawings and as directed by the Engineer-in-charge Composition: 100% PET (60% Recycled) with adhesive backing Category: Panels Dimensions: 1220x2440mm (+/-2mm) Thickness: 9mm (+/-7%) Sound Absorption: 0.70 NRC (No Air Gap

Providing and fixing Armstrong make Ceiling Acoustic Sound Scape Shapes made of glass fiber acoustic panels of required shapes and sizes, having NRC (Noise Reduction Coefficient) minimum 0.90, suspended with suitable hanging arrangement including necessary frame, suspension system, anchor fasteners, and all complete as per manufacturer’s specification and direction of Engineer-in-Charge.

12 mm thick

18 mm thick

Supplying and fixing GREEN CURTAIN with fabric of first quality, approved shade and colour, manufactured by REPUTED VENDOR etc complete all as specified and directed by Officer in charge. Note: a) Rate quoted for the item deemed to include for wastages. b) Window area shall be considered for payment.c) Basic cost of fabric shall not be less than Rs 180 Sft.

Providing and fixing the position of the Studio room chairs.The seat is made up of 1.4 plus/minus 0.1 cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 48cm(W) * 51cm(D) The Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of fixed lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.4 plus/minus 0.02 cm.BACK SIZE: 44.0 cm(W) * 51.5 cm(H). The polyurethane foam for seat is of density = 30 ± 3 kg/m3. The Fixed armrest is made of injection moulded Polypropylene which is connecting seat and backThe mechanism is designed with the following features: 360° revolving type. Centre Tilt. Tilt with upright lock. The pneumatic height adjustment has a stroke of 9.5 plus/minus 0.5 * cm The pedestal is injection moulded Polyamide and fitted with 5 nos.twin wheel castors. The pedestal is 60 plus/minus 0.5 cm P.C.D. The twin wheel castors are injection moulded in black Polyamide having 5.0± 0.1cm wheel Diametercomplete as per design, drawing and as per specifications.

Supply, installation, and commissioning of high-speed dual-band Wi-Fi router along with required access points/repeaters for full coverage, including laying of CAT6/CAT6A LAN cables with conduits, trunking, RJ45 connectors, faceplates, patch panels, and labeling; installation of network switch, connection of power adapters, stabilizer, and UPS (if required); application of protective coating/finishing on exposed conduits and cable trays as required; configuration of router and access points with SSID, password, and security settings; testing of connectivity, speed, and coverage at all points; preparation of network diagram, device inventory, configuration details, and provision of basic user training; complete execution of all materials, labor, coating, and accessories required for proper functioning of the Wi-Fi network as per standard safety practices, and final handover to client. (Non-Schedule Item)

The Consultant shall prepare all required drawings, including detailed layout plans, sectional details, 2D/3D views (wherever required) and any other design/documentation as directed by the Engineer-in-Charge / Client from time to time. A lump sum fee @ 1% of the estimated cost put to tender shall be payable by the Contractor to the Consultant, and the same shall be deemed to be included within the Contractor’s quoted rates. Proof of such payment to the Consultant shall be submitted by the Contractor along with his running/final bill before completion of work.