SPECIAL REPAIR TO JCOs ACCN AT GULAT ROAD NEAR CP1 and BLDG NO P12 AT ABDUL HAMID ENCLAVE AT OLD AMRITSAR CANTT

Amount

Taking down chowkats or frames with shutter (without taking off shutters from chowkats / frame) not exc 1.50 Sqm each including cutting of holes for hold fast complete all as specified.

All as per Srl Item No 01.00 here-in-before but exc 1.50 Sqm and not exc 4.00 Sqm each.

Taking down shutter of any description size exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified.

Demolition of cement concrete, in ground floor and paving, not exc 15 cm thick (below or above ground level), disposal of debris and rubish, unserviceable materials etc to a distance not exc 100m complete all as specified and directed.

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris, rubbish to a distance exc 400 m but not exc 500m complete all as specified.

M&L for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 complete all as specified.

All as per Srl Item No 06.00 here-in-before, but except bricks. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.

Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water complete all as specified.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface fair and even etc complete all as specified.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling usign WPC by weight of cement and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse complete all as specified and directed.

M&L polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non-wove fabric (weight not less than 150 gm/sqm), laid on primed surface by forced application laid after preparation of surfaces by cleaning thoroughly to achieve a smooth surface, including application of a coat of bitumen primer @ 0.30 ltr per Sqm over a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm, overlaps of polymer shall be minimum 10 cm width/length wise complete all as specified and directed.

M&L for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

M&L factory made, 35 mm thick flush shutter, soild core construction with plywood face panels, commercial type on both sides, ISI marked complete all as specified.

M&L solid PVC shutter one side prelam of any shade 18 mm thick plain colour as in cup board/kitchen cabinates complete all as specified.

S&F solid PVC 5mm thick plain colour PVC sheet wood grain printed in strips as in aluminium partitions complete all as specified.

S&F solid PVC board 18mm thick plain colour PVC sheet wood grain printed in strips as in aluminium partitions complete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with mild steel square tube, complete all as specified and shown on drawings.

M&L 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified.

S & F Godrej type cup board shutter 1mm thick fitted in frame of 35x35x6mm size including necessary fittings such as handle ,lugs etc complete all as specified and directed.

Supply and fixing plain, framed, panelled shutters 35mm thick (any numbers of panels) of 2nd class hard wood (Hollock), with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commerical face veneers complete all as specified

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing given in Section 8 of SSR Part –II 2010.

M&L box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one or two No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block, complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass, wire mesh and painting shall be measured and paid sperately.

M&L box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as stopper, cleat, pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes complete all as specified. Note: Sheet glass and painting shall be measured and paid Separately.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples or wooden beads complete all as specified.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples or wooden beads complete all as specified.

S&F 4mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes complete all as specified.

All as per Srl Item No 28.00 here-in-before but figured glass pin head type & glazing with oil putty.

M&L mild steel framed works, as in door frame, gates of angle or other section with gusset plates, rails, braces etc, drilled for fixing of steel sheeting including drilling or fixing welding be prepared for hanging or sliding with and either hooks and hinges fixing, framed work as in grill, guard bars etc withends of bars riveted or forged into spikes, framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

S&F butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame complete all as specified and directed

S&F 75 to 80 mm size stainless steel handle complete all as specified.

S&F 40mm long box type steel hinges spring action complete all as specified.

S&F 125mm size Aluminium anodised handle cast type complete all as specified.

S&F 150 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 200 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 300mm size, aluminium alloy anodised sliding door bolt, with hasp and staple, with sliding bolt not less than 12mm dia including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F 300mm mild steel ordinary rat tail rod pattern spring stove enameled including roller plate including fixing with nailsd/ bolts or welded compete all as specified.

M&L for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over wall putty to achieve smooth surface complete all as specified.

M&L for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over alkali resistance primerto achieve smooth surface complete all as specified.

M&L for preparation of old decorated surfaces on walls and applying two coat of oil bound distemper complete all as specified.

M&L for preparation of old decorated surfaces on walls and applying one coat of oil bound distemper complete all as specified.

M&L for preparation of old decorated surfaces on ceiings and applying one coat of oil bound distemper complete all as specified.

M&L for preparation of old decorated surface of ceiling and applying two coat of white wash complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying two coat of white wash complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified.

M&L for preparation of old decorated surfaces of walls and applying two coat of cement base paint complete all as specified.

M&L for preparation of new steel surfaces of any description, over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick with plugs, washers and waste pipe complete including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all minimum size 915mm x460mm, bowel size 410mm x 330mm x160mm complete all as specified.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall / floor and making good in CM1:3 all as directed.

All as per Srl item No 52.00 here-in-before but bore of pipe 20mm.

S&F galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified.

All as per Srl item No 54.00 here-in-before but fixing only. Note: Servicable pipe shall be reused.

S&F galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor in CM 1:3 Complete all as specified.

All as per Srl item No 56.00 here-in-before but fixing only. Note: Servicable pipe shall be reused.

S&F, in replacement, bib tap 15mm bore, standard of PTMT any colour high pressure screwed for iron pipe, (Minimum weight 90gms).complete all as specified.

S&F, in replacement, bib tap 15mm bore, cast copper alloy standard screwed both ends for iron pipe or for unions, fancy type, chromium plated.complete all as specified.

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed complete all as specified.

S&F in repair for 20mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated and fixed complete all as specified.

S&F, in replacement,angle stop valve of PTMT, 15mm bore, any colour, high pressure screwed for iron pipe (Minimum weight 90gms) complete all as specified.

S&F Chromium plated towel rail 600 mm long fixed to wall all as specified and directed by Engr-in-Charge

S&F PTMT grating, dome type, 100mm dia with waste hole, with or without hinge complete all as specified.

S&F in replacement cast iron floor trap with grating 75 mm bore including jointing to waste pipe, fixed in and including PCC 1:2:4, type B1 alround complete all as specified.

S&F, in replacement, PVC connections 450mm long of 15mm size with PTMT nuts on both sides complete all as specified.

S&F in repair stainless steel kitchen plate rack size 900 x 600 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete all as specified and directed.

S&F Shower arm 15mm size,195mm long with bend of 45 degree with flange of Chromium plated complete all as specified and directed.

S&F, in replacement, shower rose, Chromium plated, 125mm, for 15mm bore pipe complete all as specified and directed.

S&F, in replacement,25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials complete all as specified.

M&L for rounding of edges to stone slab such as in steps, cooking plateform and all other location complete all as specified and directed.

Dismantling floor hearth or wall tiles, stone slab including cement mortar bedding, in any position removing debris and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic tiles, 7 to 8mm thick, coloured non skid,mat finish (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floor, set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 15mm thick bedding layer in cement mortar 1:6 complete all as specified.

M&L ceramic tiles, 7 to 8mm thick, coloured non skid,mat finish (square / rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in floor, set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 15mm thick bedding layer in cement mortar 1:6 complete all as specified.

M&L glazed cermic coloured tiles of size 450x350x7mm thick, on vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified.

M&L chequered, coloured, cement concrete tiles with grey cement and no pigment, size 300mm x300mmx25mm thick over and including 15mm thick cement screed in CM 1:6, set, jointed and pointed in neat cement slurry over and including 75mm thick PCC 1:4:8, type D-2 complete all as specified.

M&L for machine cut granite 20mm thick, any type, table rubbed and polished, in cooking platform and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone over and including 15mm thick cement screed bed in CM 1:6 including taking down existing stone slab, tiles etc complete all as specified.

M&L for green marble 16-20mm thick, any type, table rubbed and polished, in cooking platform and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone over and including 15mm thick cement screed bed in CM 1:6 including taking down existing stone slab, tiles etc complete all as specified.

S&F machine cut Kota stone slab in riser of steps,skerting,dado and pillars 20-25mm thick over cement screed bedding 15 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing (with bees wax polish) etc complete all as specified.

S&F vitreous china squatting pan (Orissa Pattern), size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including connection to trap and flushing pipe, flushing cistern and bedding in and including PCC 1:7:12, type F-2 and taking down / dismantling old unserviceable WC complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan(Padestal Pattern)white incl plastic water closet seat coloured with jet closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device fixed PVC valveless, symphonic action type, flushing cistern, 10 Ltr capacity, white, low level with ball valve float, handle including bracket & 32mm dia pvc flush pipe PTMT couplings complete all as specified and directed.

S&F in repair PVC valveless, symphonic action type, flushing cistern, 10 Ltr capacity, white, low level with ball valve float, handle including bracket & 32mm dia pvc flush pipe PTMT couplings complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back, size 550mm x 400mm including mild steel brackets, pillar tap 15mm size, chromium plated, PTMT waste coupling, PVC heavy duty waste pipe 32mm dia, including cutting for and pinning in ends of bracket complete all as specified.

S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position with 20mm bore ball valve, capacity 500 litres including dismantling of old unservicable water tank complete all as specified and directed.

Dismantling of 75/100mm dia Cast iron pipes incuding fittings and taking out of trenches, if required complete all as specified

S&F 100mm dia sand Cast iron soil waste pipes in any length with or without ears with cement joints ixed to walls complete all as specified

S&F 75mm dia sand Cast iron soil waste pipes in any length with or without ears with cement joints ixed to walls complete all as specified

S&F branch piece, junction (single/double), 'T' (single/ double), equal or unequal with access door, dia of pipe 75/100mm complete all as specified.

Demolition of 100mm dia AC drain pipe and taking out of trenches, if required complete all as specified

S&F PVC (SWR) pipes single socketed, dia of pipe 110mm, in any length with rubber ring joints, fixed to wall with MS stack clamps of adequate size including taking down old unservicable pipe of any description complete all as specified.

S&F PVC (SWR) bend, any radius, for dia of pipe 110mm, with or without access door complete all as specified.

S&F cast iron bend, any radius, for dia of pipe 100mm, complete all as specified.

M&L for 50 mm thick cement concrete 1:3:6, type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection / path, finished even and fair without using extra cement complete all as speciified.

M&L for roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust inclusive brushing neat cement slurry with 3.0 Kg of cement per sq. metre complete all as specified and as directed.

M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in sunken portions complete all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed

M&L cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, as in blocks of hold fasts, back fill of presssed steel chowkats, roof kerb, mud stop, egdes rounded complete all as specified.

M&L for 25mm thick sand filling under/over floors in foundations including watering and consolidation.

M&L machine pressed precast conctete interlocking paver block, any shape and size, conforming to IS 15658-2006, 60 mm thick, M-35 grade, with grey cement and no pigment, laid over and including 25mm sand cushioning complete all as specified.

Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m deep, in soft/loose soil for foundation, laying of pipes, cables, wells, cesspits, manhole, pier holes & getting out complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material to distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

E/M-Portion:-Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, in junction box including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of bakelite sheet is included in the unit quoted rate.

All as per Srl Item No 105.00 here-in- before but for one socket outlet point 5 amps on the same board.

All as per Srl Item No 105.00 here-in-before but for one socket outet point 5 amps on independent board.

All as per Srl Item No 105.00 here-in-before but with 2.5 Sq mm FR copper wire with 2.5 Sqmm FR copper earth wire for power point on independent board.

S&F switch piano flush type 5 Amp AC single pole one way, 230 volts, complete all as specified.

S&F socket outlet 5 Amps, 2/3 pin combined, 230 volts, AC complete all as specified.

S&F switch piano flush type 15 Amps, 230 volts, AC complete all as specified.

S&F socket 15 Amps, 2/3 pin combined, 230 volts, AC complete all as specified.

S&F ceiling rose surface bakelite 65 x 50mm three terminals complete all as specified and directed.

S&F lamp holder insulated body with back plate batten / angle type for batten fitting including LED bulb 9 watt 230 volts cool day light 6500 K complete all as specified and directed.

S&F MCB C Curve type, 10 KA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as specified and directed.

S&F MCB C Curve type, 10 KA, 40 to 63 Amp,doublePole with over load and short circuit protection complete all as specified and directed.

S&F MCB B Curve type, 10 KA, 40 to 63 Amp,doublePole with over load and short circuit protection complete all as specified and directed.

Taking down Geaser ,keeping safe and refixing in same position after repairs all as spcified and directed.

Supply & Fixing exhaust fan 380mm sweep and connecting to supply all as specified and as directed by E-In-Charge.

Supply & Fixing exhaust fan 280mm sweep and connecting to supply all as specified and as directed by E-In-Charge.

Supply & Fixing fresh air fan 220mm sweep and connecting to supply all as specified and as directed by E-In-Charge.

S&F, in replacement, fan regulator, step type, heavy duty, 230 volts, AC complete all as specified.

S&F bell Ding Dong including bell push single pole 5 amps one way 230 volt AC complete all as specified and directed.

M&L for sub main wiring consisting two single core PVC insulated cable with stranded copper conductor, size 6 Sqmm, copper earth wire 6 Sqmm, drawn in and including concealed non metalic PVC conduit, 1.5 mm thick, 25 mm dia (external) inclusive of MS junction / terminal boxes and all fittings and accessories including taking down old unservicable sub main wiring complete all as specified. Note:- Two run of cable 6 Sqmm and one run of 6 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

M&L for sub main wiring consisting two single core PVC insulated cable with stranded copper conductor, size 2.5 Sqmm, copper earth wire 2.5 Sqmm, drawn in and including concealed non metalic PVC conduit, 1.5 mm thick, 25 mm dia (external) inclusive of MS junction / terminal boxes and all fittings and accessories including taking down old unservicable sub main wiring complete all as specified. Note:- Two run of cable 2.5 Sqmm and one run of 2.5 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

S&F, in replacement, security light IP 66 with high power LED, 25 watt, energy saving, environment friendly, including bracket made out of GI pipe medium grade 40 mm bore 1.5 mtr long, made to shape, fixed with MS clamps of MS flat 40x6mm, nuts, bolts and washer and making connection with and provision of electric cable complete all as specified and directed.

S&F, in replacement, security light IP 66 with high power LED, 36 watt, energy saving, environment friendly, including bracket made out of GI pipe medium grade 40 mm bore 1.5 mtr long, made to shape, fixed with MS clamps of MS flat 40x6mm, nuts, bolts and washer and making connection with and provision of electric cable complete all as specified and directed.

Supply and fixing, wall/ceiling mounted, LED 18 Watt PC Diffuser tube light fitting complete with all accessories, 1x18 Watt LED tube rod and making necessary connection with PVC insulated copper twin core 23/0.0076 twisted wire complete all as specified and directed.

Supply and fixing Distribution Board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

Supply and fixing Distribution Board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

Supplying and fixing MCCB incomer MS sheet steel enclosure distribution boards, double door vertical type CRCA factory made,TPN,vertical 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB (160 Amps, 36 KA,4 POLE TP, 415 volts, 50 HZ= 01 No) with insulated material like polyester or with epoxy powder coating and IP 43 protection, surface mounting complete all as specified and directed. Note:- MCCBs shall be measured and paid separately.

S & F PVC sintex box for fixing electric meter of size 40x30 cm including connection all as specified and as directed.

Supply and fixing new generation energy saving and environmental friedly long life10 watt LED,6000K bulk head luminaire including builtup LED with opal diffuser light fitting all as specied and directed Make - Halonix, Cat part No-HLSLD-C10-45CWL or Equivalent cat part in makes specified in appendix 'B'

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty with aluminium conductor, 1100 volts grade, 25 Sqmm 4 core, including thimbles / lugs / cable gland etc, laid in duct / trench / along pole etc complete all as specified.

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty with aluminium conductor, 1100 volts grade, 16 Sqmm 4 core, including thimbles / lugs / cable gland etc, laid in duct / trench / along pole etc complete all as specified.

M&L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Supply and lay, bricks, common burnt, sub class 'B', old size, for protection of cable, laid in trenches over cable, length of brick perpendicular to directon of cable, complete all as specified and directed.

S&F GI pipe 50mm dia light grade for cable protection, fixed to poles, under road, along wall inculding necessary MS clamps complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mm, 6mm thick, burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate to a depth not lesss than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth strip of size 32mm x6mm by means of GI nuts, bolts and washers. wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a) Test point of GI strip of size 32mmx6mm. (b) Watering pipe of GI pipe light grade 20mm bore from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover (d) Angle iron frame made of 40x40x4 mm angle iron PCC pit for holding the pit cover. Note:- The cost of excavation & earth work shall be included in the quoted rates.

m/s. gopal krishan

M/s Vijay Construction Co.

m/s inder construction co