Erection diversion augmentation and dismantling of HT LT overhead lines electrical circuit and lighting circuit for day to day work of power supply associated at Rampur Batura OCP of Sohagpur Area SECL

Erection, diversion, augmentation & dismantling of HT/LT overhead lines, electrical circuits and lighting circuits for day-to-day work of power supply associated at Rampur Batura OCP of Sohagpur Area, SECL

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation Including excavation and refilling and secured with holding clamps, bolts, nuts etc. as required of pole

Suppplying & Erection of stay set complete (Galvanized) in cement concrete 0.2 cmt/sta., 1:3:6 (1 cement : 3 coarse :6 graded stone) foundation including excavation and refilling etc.

Erection of angle Iron/channel iron cross arm on wood RCC/PCC/Steel pole etc. as required for one span Guarding (1 set 2 cross angle) (Iron/channel will be provided by SECL.)

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.

Providing & Fixing of Shackle insulator 1.1KV, 100x110 mm with suitable GI Bolt and hardware including binding etc. as required.

Erection of ACSR, Rabbit conductor including binding etc. as required (One wire/KM). (Only conductor will be provided by SECL)3 km (214 kg/km) =3 X 214 =642 Kg.

Erection of ACSR, Dog conductor including binding etc. as required (One wire/KM). (Only conductor will be provided by SECL)394 kg/km X 5 = 1970 (05 Km ~ 1970 Kg.)

Providing & Erectiori of G.I. Wire no. 8 SWG including binding etc. as required. For earth continuity.3 KM

Dismantling of Over Headlines. (2 KM = 788 KG)

Dismantling of pole /street light standard / strut embeddedin cement concrete foundation etc. as required .

Fabrication of angle iron/channel iron crass arm suitable size for pole with clamp as required. (Suitable for 3 wires in HT line and 5 wire in LT line) .

Erection of angle iron/channel iron crass arm suitable size for pole with clamp as required. (Suitable for 3 wires in HT line and 5 wire in LT line) .

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:(120 sqmm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(3 X 120 Sqmm)

11 KV pin Insulator with pin washers and nuts, with all accessories.

11 KV Disc insulator with hardware, with all accessories.

Galvanized insulator hardware fitting ball and socket type with strain clamps, bolts, nuts & washers, with all accessories (suitable for stringing conductor with disc insulator)

Outdoor type busbar with steel sheet encloser 4 pole 400 amps. 415V with complete in all respect.

Digital timer for streetlight with all respect as per instruction of Engineer I/C.

Fixing Charge of Above Item having Serial No-19

Rubber tape (kachcha rubber) for cable repairing/jointing work

Fixing Charge of Above Item having Serial No-21

LED rope light (three coloured, yellow, green)

Fixing Charge of Above Item having Serial No-23

Cleaning, painting of pole various size (11 mtr., 13 mtr, 16 mtr,) average hight 13 mtr. With brackets of different HT & LT overhead lines (1 ccat of red oxide & 2 coats of AL. paint and 3 no. one-foot-wide strips of red paint from ground level up to 1.5 mtr. of reputed make)(Paint will be provided by contactor)

Providing & Fixing of lighting arrester system 3.3 KV, 3 Phase (Complete set with all accessories)

Supplying and fixing MV horn gap lightning arrestor as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 207 metre long etc. ( with charcoal/coke and salt) as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required.

Supplying and fixing of (cadle)guarding between the span 50 to 60 mtrs. (material 8 SWG Galvanized Iron Wire)as per rules & regulation

Providing and fixing of anti-climbing device/barbed wire protection of LT overhead line poles for protection of light fittings. The barbed wire fencing will be up to a length of 3 meter per pole and welded at each end by iron angle cleats for retaining the barbed wire coil on the pole body. All materials like barbed wire, gas and cutting set, welding electrodes and DG operated portable welding machine shall be in the scope of the contractor, Iron materials (MS angle for cleats) shall be provided by the department.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick,, and vitreous enameled whits on both sides, and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, 20 nade of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required

Supplying, Fabrication and fixing of 32 mm dia X 2.00 metres long G.I. pipe (mediurn class) bracket for mounting of fluorescent /HPMV/HPSV/LED streetlight fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required, or as per instruction of Engineer IVC.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable up to 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and as required. refilling the Upto 120 sq. mm trench etc.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.(Above 95 sq. mm and upto 185 sq. Mm).

Supplying and fixing following way , single pole and neutral,sheet steel, MCB distribution board,240 volts,on surface/recess, complete with tinned copper bus bar ,neutral bus bar,earth bar,din bar,interconnections, powder painted including earthing etc.as required.(But withoutMCB/RCCB/Insolator) /(6 Way,Double Door )

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)/(4 way (4+12), Double door )

Supplying and fixing 5 A to 32 As rating, 240/415 volts, 10 kA, "C" curve, minlature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Single pole)

Supplying and fixing 5 A to 32 As rating, 240/415 volts, 10 kA, "C" curve, minlature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Double pole)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Aeres in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63A)

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32A 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Brass compression gland for (35 mm) 3 X 70 sq. mm 1.1 kV grade cable

Brass compression gland for (38 mm) 3 X 95 sq. mm 1.1 kV grade cable

Brass compression gland for (45 mm) 3 X 120 sq. mm 1.1 kV grade cable

Air Break switch 3 pole, 800 amp, 11 KV grade(complete set with all accessories) vertical type for overhead line.

Fixing Charge of Above Item having Serial No-01(@10% of above)

PVC tape 19 mm self-adhesive for electrical insulation work

Fixing Charge of Above Item having Serial No-03(@10% of above)

Shifting of Ploe (Including Loading & Unloading)

Providing of Aluminium lugs 35 sq.mm, Diameter of the bore - 10.5 mm, Inner Diameter of the cable inclusion- 8 mm, Flange width -20mm, Length to middle of the bore 67mm

Fixing Charge of Above Item having Serial No-06 (@10% of above)

Providing of Aluminium lugs 70 sq.mm -10.5 mm, Diameter of the bore 11.5mm, Inner Diameter of the cable inclusion 28mm, Length to middle of the bore - 84mm

Fixing Charge of Above Item having Serial No-08 (@10% of above)

Providing of Aluminium lugs 95 sq.mm, Diameter of the bore 13mm, Inner Diameter of the cable inclusion 13.2mm, Flange width-32mm, Length to middle of the bore - 90mm

Fixing Charge of Above Item having Serial No-10 (@10% of above)

Providing of Aluminium lugs 120 sq.mm, Diameter of the bore 13mm, Inner Diameter of the cable inclusion 14.7mm, Flange width-32mm, Length to middle of the bore - 98mm

Fixing Charge of Above Item having Serial No-12 (@10% of above)

Providing of Aluminium lugs 185 sq.mm, Diameter of the bore 13mm, Inner Diameter of the cable inclusion 18.5mm, Flange width 40mm, Length to middle of the bore 109mm

Fixing Charge of Above Item having Serial No-14 (@10% of above)

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information