Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹26.4 LAccepted-AOC | 1 | Accepted-AOC being a lowest tenderer | |
| 2 | 2₹27.7 L+₹1.3 L (4.75%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | 2 | Rejected-Finance quoted rate are high | |
| 3 | 3₹29.0 L+₹2.6 L (9.69%)Rejected-Finance | 3 | Rejected-Finance quoted rate are high | |
| 4 | 4₹33.7 L+₹7.3 L (27.5%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | 4 | Rejected-Finance quoted rate are high |
Tender Value
₹40.3 L
EMD Value
₹80,660
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH PUNE
NO 1 GENERAL BHAGAT MARG PUNE 411040
8406 ADDN/ALTN 08 GUEST ROOM IN HOSTEL BUILDING OF NADFM PUNE UNDER GE SOUTH PUNE
2023_MES_589007_2
8406/E8
Open Tender
Civil Works
Item Rate
183 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹80,660
4 Jul 2023
8 May 2023
29 May 2023
8 May 2023
27 May 2023
15 May 2023
Amount
M&L POP false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish complete all asspecified and directed Make- Saint-Gobain, Armstrong, Diamond or Equivalent.
M&L for decorative POP cornices/moulding of pettern as per approved by Engr-in-Charge of cross section area exc. 13 Sqcm and n.exc. 25 Sqcm and fixed including preparation of surface and applying two coats of luster paint over a coat of primer to match with the colour of ceiling complete all as directed by Engineer-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar(1:6) complete all as specified and directed.
M&L for glazed coloured digital printed ceramic tiles of size 300mmx600mmx7mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles with and including 10mm thick backing coat in CM (1:4) and filleting at top etc complete all as specified and as directed.
M&L for coloured joint free Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, but not exc 1.2 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.
Bib taps CP 15mm bore fancy type with wall flange conforming to CAT No. CON- 037 Jaquar/ 9206 (CASA) of Prayag or of Equivalent make as specified here in after
Soap dish CAT No. ACN-1131N Jaquar/BA-259 of Prayag or of Equivalent make as specified here in after
CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag or of Equivalent make as specified here in after
Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag or of Equivalent make as specified here in after
Angular type stop cock conforming to CAT No. 053 of Jaquar/ 9210 of Prayag or of Equivalent make as specified here in after
CP toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag or of Equivalent make as specified here in after
CP 15mm bore concealed stop cock with long neck conforming to CAT No. CON-069 of Jaquar or of Equivalent make as specified here in after
CP towel ring round with round flange conforming to CAT No ACN-1121 BN of Jaquar/9218 of Prayag. or of Equivalent make as specified here in after
CP wall mixer 3 in 1 including telephone shower for 15mm bore of pipe conforming to CAT No.CON 281 and HSH -1939 of Jaquar/ PIS-70 and BH-73 of Prayag and or of Equivalent make as specified here in after
S&F 2 way bib cock with wall flange conforming to CAT No. CON 041N of Jaquar or of Equivalent make as specified here in after
S & F vitreous china wash under counter basin (colour), oval type conforming to CAT No. CNS-WHT-705 of "Jaquar" or of equivalent make specified here-in-after set in and CP waste coupling and CP bottle trap conforming to CAT No. ALD-709 and ALD-769 and Pillar cock long neck with aerator CAT No CON -021KN of "Jaquar" or of equivalent make all as specified and directed by Engr-in-Charge.
S & F in repairs, vitreous china wash down floor mounded single piece water closet pan with UF seat cover, hinges, fixing accessories set, cistern fittings, trap distance (mm) S-300, 2.5/4.2 lit flushing Rim less, Tomado flushing Size 360 x 680 x 750mm Ivory coloured, 'P' or 'S' type, conforming to CAT No OPS-WHT-15851SN of "Jaquar" or of equivalent make as specified here-in-after complete.
S&F in repairs flush pipe of polyethyline of low or high density or PVC 32mm dia of required length suitable for low level cistern complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches of following size complete all as specified:-
110mm bore
75mm bore
S&F in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.
S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and as directed.
S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 110 mm bore complete all as specified and as directed.
Supply and fixing of GI water tubing,medium grade with fittings and fixtures fixed to wall and ceiling (conceled) or laid under floor complete all as specified of following size :-
15 mm bore
20 mm bore
Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc including dispossed of dismantled material to a distance as directed complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster surfaces using CM (1:6) by using ready mix plaster etc including Sagol finish complete all as specified and as directed. (Make : Godrej,Build Well, Ascolite.)
M&L for undercorated new plastered surface of wall applying two coats of luster paint white or tinted on walls complete all as specified and directed.
M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Engr-in-Charge.)
S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including filled with PCC 1:3:6 type C-0 complete all as specified and as directed.
S & F 35 mm thick flush shutters, solid core constrution, with block board core & plywood face panels, commercial type on both side with and including 3mm thick veneer decorative plywood grade-1 (with BWR resin) [shade of veneer as approved white ash crown, figured sycamore, red film, Zebroo,white beech, steam beech, white ash, maple (light) of Truwood or century make] fixed on both faces inc. all around edges of flush shutter etc complete fixed with nails including preparation of new wooden surfaces & applying two coats of melamine polish on veneer decorative plywood grade-1 complete including fancy type stainless steel "D" type heacy duty handle (size more than 450mm long), etc complete all as specified & directed.
S&F IInd class hard wood as in chowkhats & frames, wrought, framed & rebated etc complete all as specified and as directed.
S & F mild steel electroplated butt hinges 100mm size medium weight all as specified.
S & F Brass design sliding bolt 300 long fixed with bolts& nuts, complete all as directed.
S & F Brass tower bolts 150mm long, complete all as directed.
S & F ventilators/louvers using 5mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make with and including rubber beading etc complete all as directed :- (a) SP 20048 (b) Glazing clips 19352
M&L for 3mm thick Veneered decorative fixed with screws and fevicol of (veneer Century Make or equivalent as to be fixed in raised wall paneling or flush shutters etc including melamine polish over veneer plywood complete all as specified and as directed.
S&F 12mm thick plywood, grade BWR, type BB, commercial faces, fixed with screws to timber frame work complete all as specified and as directed.
M & L for plain fillets of 2 nd class hard wood, wrought, exc 13 but not exc 25 Sqcm in section square, rectangular or triangular in section, secured with screws complete all as specified and as directed.
S&F in repairs IInd class hard wood of sectional area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall panelling work with melamine polish for architect look fixed with screws etc. complete all as specified and as directed.
Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified and as directed.
Material and labour for completely removal of existing treatment on surface of walls and after preparation of surfaces applying of two coats of texture paint over alkali resistant priming paint over and including 2 mm thick wall care putty etc complete all as specified and as directed.
M&L for Complete removal of existing treatment and after preparation of surfaces applying two coats of Luster paint with roller finish white or tinted on walls over a coat of alkali resistant primer complete all as specified & directed by Engr-in-Charge.
M&L for preparation of old decorative surfaces of wall incl, cornices (plastered or unplastered) of any description, sand papered, dusted and applying two coats of oil bound distemper complete all as specified and as directed.
All as per Ser. item No 35.00 above but on ceiling complete all as specified and as directed.
M&L for complete removal of old decorative surfaces of any description and applying 1 mm thick average thickness wall care putty on wall/ceiling complete all as specified and as directed.
M & L for French polishing on wooden surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler on old work with one or more coats complete all as specified and as directed.
Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.
M & L for point wiring with colour coding as per IS with multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable drawn through in and including heavy duty PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, including GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches of Make- Legrand (Myrius) or equivalent Honeywell / Havells / Phillips including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-
One light/fan point controlled by one switch and regulator
Switch Socket outlet, three pin, 5 Amp, independent
One switch socket outlet, three pin 5 Amps on same board.
Bell / Buzzer point controlled by one bell push.
Description all as per item No 44.00 above but using 2.5 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
S&F ceiling rose surface type, three terminals, complete all as specified and directed.
S & F modular sockets 6A, 2/3 pin universal combine 2 module, complete all as specified and directed by Engineer-in-Charge.
S & F modular sockets 6/16A, 2/3 pin combine 2 module, complete all as specified and directed by Engineer-in-Charge.
S & F modular bell push 6A, SP one way 1 module, complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet multipurpose 2 in 1, 6Amp, 230 volts flush type complete all as specified and as directed.
S&F socket outlet multipurpose 2 in 1, 15 amps, 230 volts flush type complete all as specified and as directed.
Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose including refixing the same after cleaning dust, oiling, greasing, painting with two coats synthetic enamel paints and writing MES No. etc including providing flexible three core wire of size 23/0.0076 from ceiling rose to connector of fan complete all as directed by Engr-in-Charge.
Supply and fix modular step fan regulator 120 watt, 2 module suitable for 230 volt 50 Hz AC supply, complete all as specified and directed.
S&F bell electrical ding dong including hardwood board, 240 volts complete all as specified and as directed.
M & L for submain wiring with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, in existing conduit, including continuous PVC insulated one single core copper earth wire 4.0 Sqmm FRLS all as per IS 694/1990 including taking down existing submain wiring complete all as specified and as directed. (Note : 3 runs of 4 Sqmm cable and earth wire including one run of PVC conduit & accessories shall be measured as one length.)
M & L for submain wiring with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, in existing conduit, including continuous PVC insulated one single core copper earth wire 6.0 Sqmm FRLS all as per IS 694/1990 including taking down existing submain wiring complete all as specified and as directed. (Note : 3 runs of 6 Sqmm cable and earth wire including one run of PVC conduit & accessories shall be measured as one length.)
S&F LED Light fitting1 x 20 Watt, 220 Volt made of aluminium extrusion housing with high efficient LEDs & opal diffuser, IP-20 rating connecting up with three core flexible copper conductor cable of suitable size from ceiling rose conforming to Halonix Cat part No.HLB-03-20-CW-AL or of equivalent in Philips / Havells complete all as specified and as directed.
S&F recess mounting LED down light fitting 10/12 Watt natural white complete as per existing size and making good of disturbed surfaces with POP / Gypsum ceiling as per existing with suitable fixing arrangement complete all as specified and as directed.
S&F LED table lamp 3 CCT changing and dimming 4.5 Watt sleek and portable type with rechargeable battery complete all as specified and as directed. (Make : Havells Cat Part No. LHEXBZPNFN1W4X5 or of equivalent in Wipro / Bajaj / Syska / Philips)
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
M&L in replacement of sheet metal enclosure with socket plug top & MCB, single pole & neutral enclosure with a two pin & earth plug & sockets complete with one single pole MCB 20 amp including cutting hole in or through wall any type, making good to walls/ceiling etc with existing including two coats of white wash / colour washing / distempering as required to the disturbed surfaces to match existing complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 250mm sweep with, blades, frame and louvers complete all as specified and as directed.
S&F Rigid non-metallic PVC conduit 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.
S&F Rigid non-metallic PVC conduit 25mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.
S&F PVC Junction boxes (1 to 4 way) of size 20mm dia complete all as specified and as directed.
S&F PVC Junction boxes (1 to 4 way) of size 25mm dia complete all as specified and as directed.
S&F MCB DB 8 way, double door, with 100 amp rated busbar 240 V, SPN recess mounted / wall mounted, complete all as specified and directed.
S&F MCB DB 6 way, double door, with 100 amp rated busbar 240 V, SPN recess mounted / wall mounted, complete all as specified and directed.
S&F IP-43, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 160 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to match the disturbed surfaces to existing surface, complete all as specified and directed. (Make - Legrand / ABB/L&T) (Note - MCCB 100 Amps 4 pole 25 KA as incomer will be measured & paid separately under respective items of BOQ.)
Supply and Fix MCCB TPN 100 Amps, 16 KA, 4 Pole, 415V complete all as specified and as directed.
Supply and Fix MCB TP 63 Amps,10 KA, 240V, C series complete all as specified and directed.
S&F MCB SPN 32amps,10KA,'C' series, complete all as specified and directed.
S&F MCB SP 6-32amps,10KA,'C' series, complete all as specified and directed.
Supply, laying, testing and commissioning of UG LT cables of size 120 Sqmm 3.5 core, 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminium conductor, heavy duty conforming to IS-1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/ fixed to poles/drawn through pipes complete all as specified and as directed.
Supply, laying, testing and commissioning of UG LT cables of size 50 Sqmm 3.5 core, 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS-1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/ fixed to poles/drawn through pipes complete all as specified and as directed.
Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for foundation and getting out in hard/dense soil complete all as specified and as directed
Returning filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and as directed
Removing excavated material not exceeding 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.
M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm, 2 Nos half round (for bottom and top) and before laying excavated area shall be leveling complete all as specified and directed Engr-in-charge.
S&F GI tubing 50 mm dia Light grade for cable protection laid in wall /floor / pole with MS clamp, bolt nuts complete all as specified and directed .
S&F GI tubing 80 mm dia Light grade for cable protction at road crossing etc including necessary road cutting and making good with PCC 1:2:4, type B-1 using 20mm graded stone aggregate, 100mm thick or fixing on wall / poles of any type, secured with clamps complete all as specified and directed .
Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Panel of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.00 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall be modular/cubical trype with bus chamber cable ally and provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door, front and rear openable with locking arrangement and suitable for 1100 Volts grade, 3 phase 415 Volts, 50 Hz, AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54. The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate, 500 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc
M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bars at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site all as specified and directed by Engineer-in-charge. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)
Gauri Associates
Santosh Pandurang Pise
M/s.BAJRANG CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .