REPAIR TO FENCING DRAIN PATH ETC AND MISC BR WORKS IN OTM AREA AT AF STATION GWALIOR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 2.5 Km from the starting point complete all as specified and directed.

M & L for cement concrete type B1 1:2:4 (20mm graded stone aggregate ) on roof kerbs and like rounded or chamferred on edges etc, complete all as specified.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level and removing the debris to a distance not exc 2.5 Km from the starting point. Complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete etc complete all as specified.

M&L for 50 mm thick PCC 1:2:4 type B1 (using 20mm graded stone agg) as in floors finished even and smooth with using extra cement including necessary construction joints complete all as specified and directed.

M&L for 60mm thick machine pressed,coloured, glossy finish(rubber moulded) precast cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment any size, pattern and shape as approved by GE, laid dry over sand cushion in patterns with different colour paver block /tiles complete all as specified and directed. (Note : Sand cushioning and sub base will be measured seperately)

Dismantling of sunken position of interlocking paving blocks and re-fixing of old interlocking/ paver blocks of any thickness and size after repairing/ making good the under layers i.e. sand and sub base. Complete all as directed (Note : Sand cushioning and sub base will be measured seperately)

M&L for sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.

M&L machine made chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L 25 mm thick cement concrete 1:2:4 (12.5 mm graded stone aggregate ) type B-0 as in levelling course in floors, complete all as specified.

M&L for premium quality non skid, coloured ceramic tiles 7-8 mm thick desined/digital & approved colour (square/rectangular) area of each tiles exc 0.06 but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified.

M&L for premium quality non skid, coloured ceramic tiles 7-8 mm thick desined/digital & approved colour (square/rectangular) area of each tiles exc 0.11 but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M & L for premium quality coluored Glazed ceramic tiles of size 450 x 300 x 7 mm thick desined/digital of approved colour, as in vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified.

M&L for 10mm thick Glazed Vitrified ceramic tiles, light shade (square/rectangular), area of each tile not exc 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15mm thick in CM (1:4) for laying floor finishes complete all as specified.

M&L for 10mm thick Glazed Vitrified ceramic tiles, light shade (square/rectangular), area of each tile not exc 0.36 Sqm as in vertical surfaces such as dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in Cement Mortar (1:3) complete all as specified and directed.

Surface dressing not exceeding 15 CM deep in soft/ loose soil complete all as specified and directed.

Dismantling of old posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as directed.

All as per sl item No. 18 hereinbefore but embedded on natural ground. Complete all as directed.

M &L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F, in repair galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified. (Note :- Each line to be measured)

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundaion filling etc, complete all as specified.

Dismantling of fencing wire mesh,any type and remove from site of work,complete all as directed.

Supply only galvanised chain link fencing of size 100 x 100mm aperture and dia of wire of any size or type as approved by Engr-in -charge etc, complete all as specified. (Note :- (i) Fixing charges will be measured and paid separately under relevant item hereinafter. (ii) Weight of frame will be ascertained by the BOO before incorporation in work.)

Dismantling old wrought iron or mild steel work of any description not otherwise provideded for etc. and remove materials from site of work complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified.

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc,complete all as specified.

All as per Srl item No 31 hereinbefore but except brick work built in Cement Mortar (1:4) complete all as directed. (Note :- Serviceable bricks shall be obtained from Srl item No 27 hereinbefore for re-use)

Taking down old cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as directed.

M&L for 15mm thick rendering cement plaster in Cement Mortar 1:4 on fair faces of brick work or concrete surface finished fair & even without using extra cement complete al as specified.

M&L for 15mm thick rendering on brick work or concrete surface on wall in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of wall and applying three coats of white wash, complete all as specified.

M&L for 10 mm thick rendering on fair faces of concrete surfce in Cement Mortar (1:3) as in ceiling finished even and smooth without using extra cement as in ceiling complete all as specified.

M & L for applying three coats of white wash on ceiling of new plastered surface, complete all as specified.

M&L for preparation of new plaster on brick wall surfaces and applying two coats of cement base paint over a coat of primer of same make on walls complete all as specified.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to grade Fe.290. complete all as specified.

M&L for Mild steel work wire netting of galvanised steel wire, 1.40mm dia and 25 mm mesh/ aparature etc complete all as specified.

M&L for 0.63mm thick plain, black, mild steel sheeting, in ridges,hips, valley gutters,drip and straight flashings (length and girth as fixed)etc complete all as specified.

Dismantling old plain or corrugated Asbestos cement sheeting in roof coverings etc and remove materials from site of work complete all as directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

All as per item no 44 here in before but plain sheet as in ridges etc complete all as specified and directed.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

Dismantling framed trusses not exc 10 M Span complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

M&L for Rolled mild steel section confirming to Fe 410-W as in main and cross beams, hip and jack rafters, purlins ,hip and purlin where connected to common rafters fixed with angle cleats or other connecting plates etc including cutting to reqd length notching , drilling, fittings , rivetting & or welding or connecting with bolts & nuts etc and fixing in true posotion etc complete all as specified.

Dismantling wall and ceiling boards of any type, thickness and description including cover fillets and snap grid of any type and description complete all as specified and directed.

S&F HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified.

S&F in repair suspended false ceiling grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified.

Refixing suspended false ceiling snap grid of any description (Aluminium or GI) after carrying out necessary minor repairs to damaged parts of snapgrid and replacing the damaged parts of snap grid with new ones of the same description to match with existing complete all as specified and directed. Note: The quoted rates are inclusive of providing new hold down clips and GI wire.

M&L for refixing false ceiling bord of any thickness and description to existing snap grid including applying two coats of oil bound distemper over a coat of primer after preparation of surfaces complete all as specified and directed.

M&L in repairs Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in Cement Mortar 1:4 complete all as specified.

S&F 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

S&F stainless plate rack of size 600x900x250 mm, made out of 0.80 mm thick stainless steel sheet, best quality, fixed to wall with screws complete all as specified and directed. Make: Prayag/ Blue Star/ Nirali

M&L for repairing of RCC Chajjas/Sunshades at any height & of any size (soffits, sides and top) with cement mortar 1:4 after taking down plaster of chajjas carefully including dubbing out coat in cement mortar 1:3 where ever required and providing groove to the soffit of chajjas including top of Chajjas are to be provided with extra PCC 1:2:4 type B-1 as coving and applying three coats of white wash/ Ace paint / cement base paint to match with the existing specification are to be applying to Chajjas after the repair work is complete all as specified.

Taking down old cement plaster from conc surfaces incld APP mambrane and remove materials from site of work complete all as directed.

M&L for 10 mm thick screed bed on fair face of PCC padding in cement mortar 1:3 finished even and fair with water proofing compound complete all as specified and directed.

M& L for cutting out cracks to V section in existing roofs or terracing, clening out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.

Supply only water proofing compound.

M&L for PCC, 1:2:4 Mix, type B1 (Using 20 mm graded stone aggregate) as in levelling course to maintain the true roof slope, finished even and fair without using extra cement complete all as specified and directed.

M&L for applying one coat of cold bituminius primer over cleaned surface @ 0.30 Ltr per sqm and one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over bituminius primer then followed by APP modified five layer polymeric mambrane 3 mm thick minimum weight 3.5 Kg per Sqm reinfored with polyster non woven fabric (weighting not less than 150 Gm per Sqm) manufactured by M/S STP LTD or its equivelant or IWL laid as per the maufacturer's instruction with side over lap of 75 mm and end over lap of 100 mm and applying one coat of polymericcc modified bitumen 85/25 @ 1.20 Kg per Sqm finally finished with two coats of aluminium paint @ 0.20 Ltr per Sqm for each coat complete all as specified.

Disconnecting existing water storage tanks of capacity exc. 250 Ltr but n. exc 500 Ltrs each for repair works and refixing the same tanks in the same postion after the reapir works is carried out complete all as directed. (Note :- The work also includes making the connections of tanks leak proof by replaceing the damaged /rusted GI fittings, refixing of float valvaus and like).

Disconnecting existing water storage tanks of capacity exc. 500 Ltr but n. exc 1000 Ltrs each for repair works and refixing the same tanks in the same postion after the reapir works is carried out complete all as directed. (Note :- The work also includes making the connections of tanks leak proof by replaceing the damaged /rusted GI fittings, refixing of float valvaus and like).

Taking down eves gutters and rain water pipe of any description with all fittings complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to wall of 110 mm bore size complete all as specified and as directed.

S&F PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface of 110 mm bore size complete all as specified and as directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of 20mm bore ( minimum weight 210gms) size complete all as specified and as directed.

S&F in repair coloured powder coated Drapery Rod of aluminium 20 mm inner dia of design and pattern as approved by GE including decorative brackets at both ends complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

Taking down and refixing of old aluminium door shutter, of area exc 2.0 Sqm but not exc 4.00 Sqm, in same opening after necessary required repairs and fittings including provision of new rubber beadings and glazing clips as required complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed.

S&F in repairs viterous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, Black in colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding 32mm bore PVC waste coupling with PVC waste pipe ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

Re-fixing of old steel GI tubing, 20mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

S&F GI tubing 15mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from over head water tanks of capacity Exc 250 Ltrs but not exc 500 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed.

Cleaning and removing all scale and dirt etc from over head water tanks of capacity Exc 500 Ltrs but not exc 1000 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 litres (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position with and including light grade over flow pipe 450mm, waste pipe 600mm long with fitting etc. including of 20 mm dia, ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20mm bore minimum weight 210 gms including dismantling / taking out of old water tank of capacity of exc. 250 litres but not exc. 500 & removing to where directed complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 1000 litres (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position including light grade over flow pipe 450mm, waste pipe 600mm long with fitting etc. including of 20 mm dia, ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20mm bore minimum weight 210 gms including dismantling / taking out of old water tank of capacity of exc. 500 litres but not exc. 1000 & removing to where directed complete all as specified and as directed.

S&F 20 mm ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as approved by GE.

Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.

S&F in repair brass chromium plated hand faucet with flexible pipe of length not less than 1.00 M (Minimum) fixed for EWC/ IWC suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair PTMT waste coupling 32x100 mm in size for sink complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified .

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified .

S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement /adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed. [Make :- Rajshree/Sintex/Polycon]

S&F in repair 18mm thick solid UPVC ply of 1st quality of both side plain white colour, fixed with screwes, solvent cement /adhesive to make kitchen cabinate sides, top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and directed. [Make :- Rajshree/Sintex/Polycon]

S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

S & F continuous (Piano) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F 125 mm long, Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S & F in repair 100mm long M.S butt hinges to MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified.

S&F in repair mild steel door spring of size 200 mm long, complete all as specified and all as directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S&F for sheet glass 5.50 mm thick ordinary quality in square exc 0.5 Sqm each Pane complete all as specified.

S & F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) approved quality openable at 110 degree for kitchen cabinete shutter complete all as specified and directed.

S&F stainless steel handles of 100mm long for kitchen cabinate shutter complete all as specified.

S&F fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down suitable for 15 mm bore GI pipe complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type Wall mixer, CP Brass, with pipe bend screwed down 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type sink mixer brass chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type overhead shower with arm swivel joint chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair center hole basin mixer brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of vitreous china wash down water closet pan wall hung snow white with extened P trap including vitreous china flush cistern with twin flush and seat cover connection to drain flush pipe and anti syphonage pipe complete all as specified. [Make CERA cat Part No -2035 (CLAIR) for EWC wall hung , cat Part No - 2115,2235 for flush cistern and cat Part No - 2315 for seat cover or Hindware/Parryware as approved by GE

S&F in repair internal fittings Kit complete for vitreous china flush cistern with twin flushof complete all as specified and directed. Make -: CERA Cat Part No - 2115,2235 or Hindware/Parryware as approved by GE

S& F in repair of cera good quality rubber washers for low level flushing cistern complete all as directed.

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and remove materials from site of work complete all as directed.

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) ex 1.5 Sqm but not exc 4.0 Sqm each and remove materials from site of work complete all as directed.

Taking down old shutters of any description area exc 1.00 but n.exc 2.00 sqm each and remove materials from site of work complete all as directed.

Taking down old shutters of any description area n.exc 1.00 sqm each and remove materials from site of work complete all as directed.

S&F plain, solid, straight chowkhats and frames of second class hard wood (Sal), wrought, framed, rebated on the solid, rounded or chamfered, put togather with glue, pinned at joint complete all as specified and directed.

S&F for factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified and directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.24 (a).

S & F for factory made 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified and directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.24 (b).

Taking down old existing shutters of any description, area exc. 1 Sqm but n. exc 2 Sqm each and refixing the same in same or other opening after necessary easing & adjusting etc complete all as specified and directed.

S&F for 100mm long butt hinge extruded aluminium alloy with galvanised mild steel hingepin, anodised and fixed, complete all as specified.

S&F for 75mm long butt hinge extruded aluminium alloy with galvanised mild steel hingepin, anodised and fixed, complete all as specified.

S&F mild steel butt hinges of size 100 mm, medium weight, cold rolled mild steeland fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolts of extruded section & fixed complete all as specified.

S&F for 150 mm long aluminum handles cast type anodized complete all as specified.

S & F for 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified.

S&F for steel door spring of size 200mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified.

S&F for 250 mm long Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified .

Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified .

S&F for sheet glass 3.0 mm thick ordinary quality in square not exc 0.5 Sqm each pane complete all as specified.

S&F for sheet glass 3.0 mm thick figured or pin head glass ordinary quality in square not exc 0.5 Sqm each pane complete all as specified.

M&L for PCC (1:3:6) Type C1 (using 20 mm graded aggre-gate) as in concrete block for hold fast including necessary form work as required complete all as specified and directed.

M&L for mild steel work as in hold fast and other small articles complete all as specified and directed.

S&F 3 mm thick figured or pin head glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

M&L for applying two coats synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified.

S&F brass, chromium plated soap dish complete all as specified and directed.

S&F corner glass shelf (Set of Three) 8 mm thick (Chrome finish) of design and pattern as approved by GE, fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F for in repair PVC (PTMT alloy) bath room cabinet with mirror completes all as specified. (Make Cat part No. 551 of Pryag/Hindware/Paryware)

S&F in repair MS powder coated peg set of six numbers peg set of best quality as approved by GE complete all as specified and directed.

S&F stainless steel magnet catcher for the cupboards/cabinet including all necessary fixing arrangements complete all as specified and directed.

S&F Stainless steel cup saucer basket (SS-204) of size 19"x20"x4", best quality, complete all as specified and directed. Make: Ultrafresh/ Kitchen Gold.

S&F Stainless steel (SS-204)Thali basket of size 8"x19"x20", best quality, complete all as specified and directed. Make: Ultrafresh/ Kitchen Gold.

S&F Stainless steel (SS-204) Plate Basket of size 19"x20"x6", best quality, complete all as specified and directed. Make: Ultrafresh/ Kitchen Gold.

S&F Stainless steel (SS-204) Cutlery Basket of size 21"x20"x4", best quality, complete all as specified and directed. Make: Ultrafresh/ Kitchen Gold.

S&F Stainless steel (SS-204) large utensil Basket of size 32"x20"x8", best quality, complete all as specified and directed. Make: Ultrafresh/ Kitchen Gold.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 12 CM wide with chromium plated brackets, guard and railing, 60 CM long fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F in repairs stainless steel drawer telescopic channel of size 500 mm long having load bearing capacity of 35 Kg complete all as specified and directed. Make: Godrej/ Link as approved by GE.

S&F in repairs stainless steel drawer telescopic channel of size 550 mm long having load bearing capacity of 35 Kg complete all as specified and directed. Make: Godrej/ Link as approved by GE.

S&F in repairs stainless steel drawer telescopic channel of size 600 mm long having load bearing capacity of 35 Kg complete all as specified and directed. Make: Godrej/ Link as approved by GE.

S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for window/ ventilator frame, shutters including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE including aluminium powder coated fittings such as peg stay 150 mm long (1 No), Hing type B-21, 75 mm long ( 02 Nos), suitable handle (01 No) complete all as specified and directed. Notes : - (i) Only weight of aluminium section shall be measured and paid. No claim what so ever shall be entertained by the Govt on this account. (ii) Thickness of section shall not be more than 2mm.

S&F double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed.

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

M/S DHARMENFRA SINGH TOMAR

M/s Pal Construction

M/s Jai Durga Construction

M/s Khan Construction

M/s Gulshan and Brothers

M/S M.D. CONSTRUCTION .CO

M/S Amit Traders