REPAIR/ REWIRING REPLACEMENT OF INTERNAL WIRING SWITCH SOCKETS BOARDS FITTING/ FIXTURES REPLACEMENT OF OLD U/S TUBE LIGHT WITH LED LIGHT IN OMQ SPE AREA AT SUBROTO PARK UNDER GE (AF) SUBROTO PARK

Amount

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and directed by engg-in-charge. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover Make : Hylem / Anchor including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for One light /bell/fan point controlled by one 1 way switch

All as per Item No 2 above but One three pin switch socket 5 Amps plug point on independent board

All as per Item No 2 above One three pin switch socket 5 Amps plug point on same board

All as per Item No 2 above One bell/buzzer point controlled by one bell push on independent board

All as per item No 2 above point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including existing PVC/MS conduit in surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following :- (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) One light /bell/fan point controlled by one 1 way switch

All as per item No 7 above but One socket out let 5 Amps 5 pin on independent board

All as per item No 7 above but One socket outlet 5 Amps 5 Pin on same board with other switches

All as per item No 7 above but One bell/buzzer point controlled by one bell push on independent board

All as per item No 7 above but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly.

Supply & fix in replacement of Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed.

Supply & fix in replacement of switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement of socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement of ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark.

Supply & fix in replacement of steped type electronic fan regulator heavy duty flush type complete .

Supply & fix in replacement of Bell push flush type 5 Amps.

Supply & fix in replacement of lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark.

Supply & fix in replacement of call bell, Ding dong type, suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement of modular Switch, 5/6 Amps , 1 module,complete all as specified and directed.

Supply & fix in replacement of modular Switch, 5/6 Amps , 1 module,two way complete all as specified and directed.

Supply & fix in replacement of modular socket outlet , 6 Amp, 2/3 pin combined, 2 module complete all as specified and directed.

Supply & fix in replacement of modular Switch, 16 Amps , 1 module,complete all as specified and directed.

Supply & fix in replacement of modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular white cover plate with frame 8 module complete.

S&F flush mounting boxes 8 modular complete.

S&F modular white cover plate with frame 6 module complete.

S&F metal flush mounting boxes 6 modular complete.

S&F modular white cover plate with frame 4 module complete.

S&F metal flush mounting boxes 4 modular complete.

S&F modular white cover plate with frame 3 module complete.

S&F metal flush mounting boxes 3 modular complete.

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length. (a) 4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire)

Supply,laying, jointing,testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bore or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of following sizes:- a) LT Cable 10 Sq mm, 2 core

b) LT Cable 70 Sq mm, 3.5 core

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation of pole/stay/cable etc and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Returning/filling including spreading, leveling, watering and well raming in layers each not exceeding 25 cm thickness complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable all as specified and directed by engineer-in-charge.

Supply and lay well burnt sub class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench all as specified and directed by engineer-in-charge.

Taking down and disconnecting of old unserviceable LT U/G cable of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply & fix in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply & fix in replacement of MOD ROUND-SURFACE mounting LED ultra slim round down lighter made of PDC AL with high efficient LEDs & Glare free opal diffuser IP20, 9 watt, 6000/3000 K ,230 volt, LED ceiling fitting, complete all as specified and directed by the Engineer-In- Charge.

Supply & fix in replacement of wall mounted LED bulk head fittings, 10 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete all as specified and directed by the Engineer-In- Charge.

Supply & fix in replacement of capacitor 2.5 Mfd .

Supply & fix in replacement of metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts all as specified and directed.

Supply & fix in replacement of sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 2 way all as specified and directed.

All as per item No 49 above but 4 way

All as per item No 49 above but 8 way

Supply & fix in replacement of sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, 4 way all as specified and directed.

Supply & fix in replacement of MCB/Isolator Triple pole and neutral 63 Amps working on 415 volts 50 Hz AC supply,16 KA .

Supply & fix in replacement of MCB/Isolator single pole and neutral 32/40 Amps working on 240 volts 50 Hz AC supply,10 KA.

Supply & fix in replacement of MCB/Isolator single pole 6 to 32 Amps working on 240 volts 50 Hz AC supply,10 KA.

Supply & fix in replacement of LED Bulb 07/09 watt pin type warm white 2700/3000K .

Supply & fix in replacement of LED Bulb 07/09 watt thread type warm white 2700/3000K.

Supply & fix in replacement of LED Name plate light warm white 2700/3000K.

Supply & fix in replacement of garden light glove type including LED bulb5/7/9 watt .

Supply & fix in replacement of PVC gang box suitable for one switch and socket 5 Amps complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 60 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

Supply & fix in replacement of rigid non metalic PVC medium grade conduit 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of casing caping medium grade 20 mm ISI Marked complete all as specified and as directed by Engineer-in-charge.

S&F in replacement modular fan regulator ,120 W, 2 module complete all as specified and directed.

Supply & fix in replacement of flood light 150 watt, high power LED 6000K New Generation Energy Saving PCGLF T1 150 Power coated PDC Aluminium body with toughened glass visor. Efficacy > 100Lm/w. in 5700K CCT. IP66 , suitable for highlighting architectural features orretail spaces complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of flood light 50 watt, high power LED 3000/6000K energy saving, Highly efficient integral type mid power made of pressure die cast aluminium housing with 10 KV SPD, toughned glass, w/o Lens.IP66, suitable for highlighting architectural features orretail spaces complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of LED Security Light 60/72 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V .

Supply & fix in replacement of LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear arcylic. IP65, Optics: PC lenses with Toughened Glass, electronic driver with input voltage range of 170 to 280V.

Supply & fix in replacement of MCCB four Pole 400 Amps, 415 volt thermal release bearing adjestable type breaking cap 50 KA, comlete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of MCCB four Pole 320/350 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA, comlete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of MCCB four Pole 250 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA, comlete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 16 KA comlete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of MCCB four Pole 100 Amps, 415 volt thermal release bearing cap 16 KA comlete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of MCB TP, 100 Amps, 10 KA 440 volt 50 Hz all as specified ans directed by engineer in- charge.

Supply & fix in replacement of PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 1.5 sqmm.

Supply & fix in replacement of PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm.

Supply & fix in replacement of PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 4.0 sqmm.

Supply & fix in replacement of PVC Flexible cable copper conductor, twin core, 1100 volts grade confirming to IS:694/1990 of size 0.75/1.0 sqmm.

Supply & fix in replacement of PVC insulated Aluminium conductor twin core service cable ISI marked of size 6 Sqmm.

Supply & fix in replacement of PVC insulated Aluminium conductor twin core service cable ISI marked of size 10 Sqmm.

Supply & fix in replacement of FRP cable junction boxes including bus bar (04 Nos) with 02 Nos MS clamps of flat 40x6mm suitable size complete with nuts & bolts complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of exhaust fan heavy duty steel/Iron body 250 mm sweep complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of exhaust/ventilating fan heavy duty plastic body 250 mm sweep complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of wall mounting fan heavy duty 300/380 mm sweep complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement load line vertical distribution board 'A, frame made out of CRCA 2mm thick mild steel sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 125 Amps =01 No MCB for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Supply & Fix in replacement of Garden light fitting Glove suitable for 7/9/12 Watt LED lamp with B22d & E27 lamp holder, 1.8 mtr long GI pipe light grade 40/50mm dia including all accessories and foundation work complete all as specified and as directed by Engr-in-charge. Note :- Rates of LED bulb are deemed to be included in quoted rate

M/S R K JATOLIA ENTERPRISES

niranjan singh and company