REPAIR REPLACEMENT AND CLEANING OF WATER TANKS REPAIR TO E M INSTALLATIONS PERIODICAL SERVICES OVER HEAD RESERVOIR TANKS AND MISC B R WORKS AT DHAR ROAD UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half brick thick walls built cement mortor 1:4 complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots all as specified.

M &L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. (WPC will be paid separately).

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings, to be finished even and smooth without using extra cement complete all as specified

Supply only liquid water proofing compound

M&L for preperation of new surface and applying two coats of white washing on new ceiling surfaces of approved tint over new plastered surface, complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer , complete all as specified

M&L for preparing new plastered surfaces Applying two coats of OBD/on new plastered surface over a coat of primer of any description of approved tint over new plastered surface.

Removal of vegetations from roots etc on wall/Roof area n.exc 1.00 sqm each and making good the surface by grouting the holes and matching the plastered surfaces 15 mm thick in cement mortar (1:3) complete all as specified and directed.

Preperation of old surface plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying One coat of white washing on wall surfaces incl cornices complete all as specified and as directed by Engr-in-Charge

All as per item No. 02 here in before but on ceilling.

Preperation of old surface plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying one coats of acrylic distemper/distemper oil emulsion (OBD) on wall surfaces of any description incl preparation etc complete all as specified.

Preperation of old surface plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying two coats of acrylic distemper/distemper oil emulsion (OBD) on walls incl cornices with roller all as specified and as directed by Engr-in-Charge.

Preperation of old surface plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying One coat of cement base paint on wall surfaces complete all as specified and as directed by Engr-in-Charge

M&L for one coats of synthetic enamel paint on old wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M & L for one coat of synthetic enamel paint on old steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for preperation of old concrete painted surfaces of any description over 10 cm girth or width not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.

Application of weather proof exterior emulsion on OH Tank (Approx 2.8 Lakh Ltrs) capacity on 15 to 25 m high staging : M&L for complete removal of existing treatment by grinding the surface before preparation of surfaces of old painted surface by cleaning, rubbing with gunny bags and washing the entire surface with water mixed with bleaching powder and applying two coats of weather proof exterior emulsion paint (Ist quality) entire surface of old tank incl columns, beams, cross beams, beams above slab, exterior surface of tank. The rate quoted by the contractor included all scaffolding arrangement to carryout the work on exterior surface of seventy five Thousand Gln OH Tank. The second coat of paint shall be applied after getting the Ist coat approved by the Engr-in-Charge. The application of paint shall be done with the roller only. The contractor shall arrange all safety belt and all other equipment like helmets etc and shall be fully responsible for the safety of the labours. The contractor is advised to visit the site and work out the requirement before quoting the rates. The rate also includes minor repairs requested and nothing extra shall be cleaned by the contractor

M&L for rendering 15mm thick in CM 1:4 on concrete surfaces of external walls of RCC OH tank approx 20-22 heightusing WPC @2% by weight of cement , finishing the surface even and smooth without using extra cement complete all as specified and directed.The rate quoted by the contractor included all scaffolding arrangement to carryout the work on exterior surface of seventy five Thousand Gln OH Tank. (Note:- WPC shall be measured and paid separately under respective item as "Supply only".

Disconnectiong existing tanks of capacity exc 500 & not exc 2000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc a complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165.

S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm complete all as specified and directed.

Dismantling Asbestos cement, GI or galvolume (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including taking down of old sheet.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/chajja projections, fixed with self tapping screws all as specified.

Cutting channels, grooves or rebates n exc 15cm girth and trimming surfaces with or without reinforcement.

Dismantling boarding,in wall , celling any description, fixed in any position with nails.

Taking down and S&F false ceiling with exposed GI powder coated, white colour, grid false ceiling system space using "SILHOUETTE" XL 15mm (nominal) designer grid with 6mm Armstrong white or Global White with black reveal and 600 mm x 600 mm x 15 mm thick prime fine fissured RH 99 micro, look white/coloured tiles(superfine 15mm / silhouette) (M/s Armstrong ceiling tiles) including suspender/ragbolts, plugging to wall/ceiling etc all as per M/s Armstrong ceiling systems complete all as specified and as directed

M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) of approved design/pattern to flat surfaces incl all necessary MS frame work, 12 mm thick board and fittings as per standard practice and as per manufacturer's instrs reinforced with GI wire mesh incl dismantling of walls and ceiling board any type complete all as specifed and directed.

Taking down existing tarfelt including PCC tiles, any thickness, including plastering and leeping (whether full thickness removed or only a part there of).

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in mass concrete over roof slabs to level the surface including use of necessary form work complete all as specified and directed

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Plastering 10mm thick in cement mortar 1:4 on concrete surfaces using WPC @3% by weight of cement, finished even and smooth (b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified (opening of shutter exc 2.00 m and not exc 4.50 m and area exc 6.00 sqm and n.exc 11.00 sqm all as specified)

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 4.5 m all as specified.

S&F in repair steel rolling shutters, thickness of lath 1 mm, with out ball bearing, top cover, anchoring rod and hasp & staple, erected in position where required (in patches or whole), complete push pull or manual type complete as directed

M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall Drill in concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix) M-25 (20 mm graded stone aggregate) as in fins, fascias, louvres, parapets, and railings, newels, balustrade, and the like complete.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete.

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better, fair finishes. Complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed

M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles.

M&L for light shade Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified. Make Somnay/Kajaria or equivalent make.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10mm thick rendering in CM (1:4) on brick or concrete surfaces of finished rough to receive wall tiles complete all as specified.

M & L for machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 15mm thick screed bed in CM 1:4 all as specified and as directed.

M & L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 10mm thick plaster in CM 1:4 all as specified and as directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed.

Taking down chowkats with shutters w/o taking of shutters from the frames n. exc 1.50 Sqm

All as per srl item 56 above but exc 1.50 Sqm and n exc 4.00 Sqm

Taking downs onlyshutter exc 1 Sqm & n exc 2 Sqm each

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shwon in drg consisting with two nos pintol hinges 100 mm long, two nos stove enemaled tower bolts 150 mm long and one no steel handle, deovitailed are welded each panelan complete with necessary cleats and stopers all as specified as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly openable with outer glazed shutter and inner side wire gauge shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enamelled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper complete all as specified and directed (MS Gaurd bar/grill work will be measured and separately.

Mild steel framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works conforming to Fe-290 Gde E-165

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. .

S&F for 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both sides laminated with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F factory made 35mm thick 2nd class hard wood glazed/skeleton shutter open rebated and prepared to received glass, gauge etc with mullions (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part I

S&F MS butt hinges medium weight cold rolled mild steel 100mm

S&F for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified.

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate fixing wooden/MS door frame as requird, complete all as specified

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed

All as per item No 90 above but fixed in repairs

Hacking out old broken glass panes size quality or description from metal frames incl punching or drilling out old glazing pins/ spring clips and providing and fixing new etc

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

. Ditto as above but pin headed

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified

Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified .

Re-fixing old steel tubing, bore of pipe in 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified

Re-fixing old steel tubing, bore of pipe in 15mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified

Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to contractor's store

S&F for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified including ball brass valves, 15 mm bore.

Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to contractors store

S&F for 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position icluding 20 mm ball brass valve complete all as specified

S&F in repairs for ball brass valves, 15 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

S&F in repairs for ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) including removal of debrish out of MoD Land.

M&L for 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base, to be finished even and fair complete including use of necessary form work all as specified and directed.

S& F for machine pressed precast concrete interlocking paver block any shape and size,with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over 50 mm thick sand cushioning.

M & L for Factory made prepolished precast concrete designer tiles, ISI marked with grey cement & pigment, 25mm thick of outdoor size 300mm x 300mm , in floors , set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed incl dismantling of old tiles complete, all as specified.

M&L for Providing precast cement concrete 1:2:4 type B0 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, complete all as specified and as directed.

M & L for Factory made prepolished precast concrete designer tiles, ISI marked with grey cement & pigment, 25mm thick of outdoor size 300mm x 300mm , in floors , set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed incl dismantling of old tiles complete, all as specified.

Deduct Schedule of Credit of Rs. (-) 115835.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

RAMAN CONSTRUCTION CO

MAHADEV ENTERPRISES