Supply and Installation of Furniture for Guest House at Central University of Jammu

Providing and placing in position Double Bed with storage box with an overall size. Overall Size: 2060 (L) × 1980 (W) × 1050 (H) mm. Material of Bed Frame Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade, Headboard & Foot Board provided. Headboard complete with upholstered cushioned using high-density foam (30 kg/m³) and leatherrate finish. Thickness of Mattresses Panel ± 1(mm) 18, Thickness of Bottom Panel of Storage Box ±1 (mm) 18, Thickness of Front, Back and Side Panels ±2 (mm) 18, Thickness of material of Headboard ±2 (mm) 18, Overall Height of Headrest ±5 (mm)1050, Length of Headboard ±10 (mm) 1980, Thickness of material of Footboard ±2 (mm) 18, Overall Height of Footboard ±5 (mm) 450, Overall Length of Footboard ±10 (mm) 1980. Bed construction shall be knowkdown. There shall be leveler shoe provided at at the base to avoid scratches on the floor. Tollerance shall be ±20mm.

Providing and placing in position Single Bed with storage box with an overall size. Overall Size: 2060 (L) × 1050 (W) × 1050 (H) mm. Material of Bed Frame Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade, Headboard & Foot Board provided. Headboard complete with upholstered cushioned using high-density foam (30 kg/m³) and leatherrate finish. Thickness of Mattresses Panel ± 1(mm) 18, Thickness of Bottom Panel of Storage Box ±1 (mm) 18, Thickness of Front, Back and Side Panels ±2 (mm) 18, Thickness of material of Headboard ±2 (mm) 18, Overall Height of Headrest ±5 (mm)1050, Length of Headboard ±10 (mm) 1050, Thickness of material of Footboard ±2 (mm) 18, Overall Height of Footboard ±5 (mm) 450, Overall Length of Footboard ±10 (mm) 1050. Bed construction shall be knowkdown. There shall be leveler shoe provided at at the base to avoid scratches on the floor. Tollerance shall be ±20mm.

Providing and supplying a Bed side table made of Pre-laminated Particle Board Grade-II conforming to IS:12823 with approved laminate and finish. Configuration: 1 No. drawer with smooth sliding channel and 1 No. open storage. Drawer fitted with approved handle and hardware. Bed side table construction shall be knowkdown. Overall size 500(W) × 480 (D) × 450 mm (H). There shall be leveler shoe provided at at the base to avoid scratches on the floor. Tollerance shall be ±20mm.

Providing and supplying Work Table with Side Storage Unit, made of pre-laminated particle board. Overall size approx. 1200(W) × 600 (D) × 750 mm (H). Table top size 1100 x 600mm & shall be made up of 25 mm thick PLPB, Gable End, Modesty, Drawers and Internal panels in 18 mm thick PLPB finished with approved lamiante & Sealed with 2 mm PVC edge banding on all exposed edges. The table shall be supported on one side with gable end & other end supported with fixed drawers. Complete with 2 Nos. drawers (1 Drawer + 1 Shutter), telescopic drawer channels, central locking system. There shall be leveler shoe provided at at the base to avoid scratches on the floor. Tollerance shall be ±20mm.

Providing and supplying medium back chair with ergonomic design. The seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 40kg/m³ with foam net tapestry 0.9mm thick and the back shall be made of two piece injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest shall be made by keeping the natural curvature of the spine. The armrest of the chair shall be used injection moulded polypropylene fix arm completely joint with net back frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with BIFMA standard gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA standard. The seat size shall be 485±10 mm(W) X 510±10 mm(D), seat height 440±10 mm and back size shall be 440±10 mm(W) X 530±10 mm(H) from seat. Overall height shall be = 920±10 mm, base width/ depth = 710±10 mm. Tollerance shall be ±20mm.

Supplying & placing round table with an overall size 550mm Dia. X 450mm. The top of the table shall be made up of 18mm thick rubberwood top with hydrographic designer polish. The top profile shall be in circular shape. The top shall be supported on SS pipe frame having thickness 1.2mm. The table under structure shall consist of 4 nos. of legs made up of SS 202 gold plated reducing leg. There shall be leveler shoe provided at at the base to avoid scratches on the floor. Tollerance shall be ±20mm.

Providing and supplying lounge chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick ply-board padded with high resilience polyurethane foam 50 mm thick having density 40 Kg/m³ and the back shall be made of 12mm thick hot pressed commercial plywood padded with 40mm thick having density 32kg/m³. The seat and back shall be upholstered with leatherette tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. The chair shall be supplied with cushion arm with covering top completely joint with seat and back.The frame structure shall be supported by four legs made up of MS chrome plated in round shape. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 485±10 mm (D) X 450±10 mm (W) and back size shall be 540±10 mm (H) from seat. Overall height shall be = 955±10 mm, overall depth/width = 640±10 mm. Tollerance shall be ±20mm.

Providing and supplying Tea/Coffee overall Size : 762 W x 1220 H x 530 D (MM), Aesthetically appealing plain, made from combination of dent resistance 0.7mm & CRCA 0.8mm. Internal Configurations using Standard Items (1 Drawer & 2 Shutters). Legs are fitted with screw type leveler. Construction:completely knock down. Table shall be suppied with Marble Top. Finish: All CRCA sheetmetal and metal frame components are powder coated (NEROLAC POWDER) with epoxy polyster powder to the thickness of 50-60 microns base doors with Maruti Lock. Hardware: High quality standard hardware (EBCO) like screw, washer, lock, door hinges,bumpers,etc. Tollerance shall be ±20mm.

Providing and supplying Wall Mounted TV Shelf made of 18 mm thick pre-laminated particle board conforming to IS 12823 Grade II with approved laminate finish and PVC edge banding 2 mm thick on exposed edges. Overall size shall be 1200W × 600D × 18mm thick PLPB. Table top shall be full round in one side & supported side L Braclet with MS Pole with epoxy polyster powder to the thickness of 50-60 microns. Tollerance shall be ±20mm.

Providing and supplying Luggage Table made of pre-laminated particle board conforming to IS 12823 Grade II with approved laminate. The Table top shall be made up of 25mm thick PLPB & all other structure shall made of 18 mm thick board with 2 mm PVC edge banding on exposed edges. One Gable end of 600H & another one is 750H. The table shall be supplied with Metal Strips to avoid scratches on the top. Overall size shall be 900W × 600D × 600-750H mm. Tollerance shall be ±20mm.

Providing and supplying STEEL WARDROBE Overall Size : 2010 H 1220 W 585 D(MM) Aesthetically appealing plain, made from combination of dent resistance 0.7mm & CRCA 0.8mm hanging rod made of 1.0mm thk. Internal Configurations using Standard Items (5 Shelves(0.8 mm) +1 Hanging Rod). MS ERW oblong tube. Legs are fitted with screw type leveler. Construction:completely. Finish: All CRCA sheetmetal and metal frame components are powder coated (NEROLAC POWDER) with epoxy polyster powder to the thickness of 50-60 microns base doors with aluminium handles (EBCO). Locker with Aluminium handle, cam lock with 2 way locking (EBCO) mechanism. Hardware:High quality standard hardware (EBCO) like screw, washer, shelf supports, lock, door hinges, bumpers,etc. Tollerance shall be ±20mm.

Providing and supplying Steel Dressing Overall Size : 2010 H 530 W 370 D (MM) Aesthetically appealing plain, made from combination of dent resistance 0.7mm & CRCA 0.8mm. Internal Configurations using Standard Items (4 Shelves(0.8 mm) & 1 Hidden Locker. Legs are fitted with screw type leveler. Construction:completely. Finish: All CRCA sheetmetal and metal frame components are powder coated (NEROLAC POWDER) with epoxy polyster powder to the thickness of 50-60 microns base doors with (EBCO). LED Light on Top for Dressing & One Bangle Box Fitted On Door. 360 Degree Lock on Door (EBCO)Hardware:High quality standard hardware (EBCO) like screw, washer, lock, door hinges Telescopic Channel, bumpers,etc. Tollerance shall be ±20mm.

Supplying & Placing Modular table in completely knock down conditions with an overall size 2000mm X 1850mm X 750mm that is to be assembled at site. The top shall have the size 1800mm X 900mm made up of 36mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape with Aluminium L-section and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on particle board based gable end at one side and 75mm Peg on another side. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 49mm thick Pre-laminated particle board and profile shall be in linear shape and covered by Aluminium profile and edges with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The side top shall be provided with an overall size 1850mm X 600mm. Single sided power connection box shall be enclosed at table top that houses telephone cable, data and power connection discretely. The side top shall be supported on metal peg which mounted over side storage unit. The edges shall be covered by Aluminium profile. The table shall have side unit for storage purpose with an overall size 800mm X 500mm X 465mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 2 drawer with same size. The drawer shall be operated with SS handle and easily close & open with the assistance of ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The side unit shall be mounted on 50mm Peg. Tollerance shall be ±20mm.

Supplying and placing ergonomically designed, comfortable & aesthetically appealing High back chair. The seat shall be made of 15mm thick hot pressed curved plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM and the back shall be supported by metal insert MS CRCA frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. Headrest shall be provided for comfort of head with leatherite tapestry. The armrest shall be used MS CRCA chrome plated with PU arm completely joint with seat and back. The chair shall have Swivel Tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 485±10 mm(W)X520±10 mm(D) and back size shall be 740±10 mm(H) from seat & overall height = 1150±10 mm. Tollerance shall be ±20mm.

Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of natural wood and combination of (18+6)mm thick double layered moulded commercial plywood padded with high resilience polyurethane foam 70mm thick having density 32kg/m³ in seat and 45mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 1mm thick and 571 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support as well as head support. The chair shall be supplied with PP chrome cushion arm with leatherite covering top. For seating durability the chair shall have Swivel Tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged injection moulded Polypropylene with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA X5.1-2011 standards tested to perform 98,000 cycles with 250lbs load. The seat size shall be 500±10 mm(D) X 535±10 mm(W) and back size shall be 510±10 mm(W) X 660±10 mm (H) from seat. Overall height shall be = 1125±10 mm, overall depth = 700±10 mm & overall width = 660±10 mm. Tollerance shall be ±20mm.

Providing and supplying a visitor chair with ergonomic design for user comfort & shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1mm thick, 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. Chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 510±10 mm(D) and back size shall be 450±10 mm(W) X 540±10 mm(H) from seat & overall height = 980±10 mm, overall width = 560±10 mm. Tollerance shall be ±20mm.

Providing and supplying a visitor chair with ergonomic design for user comfort & shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (50+25)mm thick having density (40, 32)kg/m³ and the back shall be made of double layered moulded plywood (12+6)mm thick padded with high resilience polyurethane foam (32+12)mm thick having density (32, 23)kg/m³. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for back support. The chair shall be supplied with cushion arm having leatherite covering top. The frame structure shall be cantilever support type made up of MS CRCA chrome plated tubular pipe of size 40mm X 20mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(D) X 515±10 mm(W) and back size shall be 515±10 mm(W) X 540±10 mm(H) from seat. Overall height shall be = 945±10 mm, overall depth = 690±10 mm & overall width = 580±10 mm. Tollerance shall be ±20mm.

Providing and supplying a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The armrest shall be flap with soft cushion on both side for aesthetically appealing as well as side comfort. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have SS Gold Plated Leg. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. Overall Size 1990(W) X 800(D) X 840(H). Tollerance shall be ±20mm.

Providing and supplying a two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The armrest shall be flap with soft cushion on both side for aesthetically appealing as well as side comfort. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have SS Gold Plated Leg. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. Overall Size 1700(W) X 800(D) X 840(H). Tollerance shall be ±20mm.

Providing and fixing Baffle Ceiling System comprising 90 mm x 120 mm Rectangular shape panels of wood grain with approved finish@ 6" C/C. Hanging with L Coner & Suspended Rod. Tollerance shall be ±20mm.

Providing and fixing of Full-height partition, overall 45 mm thick powder-coated aluminium sections, including with 10 mm thick clear heavy glass panels covered with strip-type adhesive glass film. All aluminium panels and trims shall be powder-coated with a minimum thickness of 50 microns. The aluminium trims shall be fixed in position with approved special fixtures to ensure proper alignment, stability, and an elegant finish. Tollerance shall be ±20mm

Providing and fixing of Glass Door made of 12 mm thick clear toughened glass, complete with stainless steel handles, L-connectors, Locks and closing mechanism (Dorma make). The overall size of the single door shall be 990 mm (W) × 2100 mm (H) × 12 mm (Thk). Tollerance shall be ±20mm.

Providing and placing of Circular ceiling hanging light, complete with LED/fluorescent lamps having size 300 X 300 Dia. Tollerance shall be ±20mm.

Providing and placing of Wall Art, Framing & Mounting with HD Resolution Printing. Tollerance shall be ±20mm.

Supplying & placing dining table with chairs an overall size 1800mm X 900mm X 750mm. The top of the table shall be made up of composite Marble. The top profile shall be in rectangular shape with the three step molding profile edges shall be in chamfer shape. The under structure shall have teak wood having size 75mm X 75mm square legs with melamine polish. There shall be shoe provided at the bottom to avoid scratches on the floor. Dinning Chair: The seat shall be made of 12mm thick plyboard and season/teak wood frame upholstered with high resilience polyurethane foam 30mm thick having density 30kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of season/teak wood malemine polish finish frame. The frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm X 50mm. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 400(D) X 400(W)mm and back size shall be 400(W) X 500 mm(H) from seat. Overall height shall be 800 mm. Tollerance shall be ±20mm.