Certain sanction works of E/M at Mil Stn Beas under GE Kapurthala

Amount

M&L for trial boring/drilling of borewell with direct rotary/ reverse rotary rig method or as per site requirement of suitable size not less than 250 mm dia upto 200 mtr depth below ground level. The drilling of bore shall be done by DTH-cum-rotary or reverse rig method by deploying suitable machinery of suitable size and different cutters through any kind of soil strata including boulder, rock, hard stone etc including all arrangement for circulation of water using bentonite or silly clay (Quantity/content mixed as per manufacturer recommendation or as directed by Engineer-in-Charge as per site or soil condition including disposal of spoil from the site n.exc 500 mtr and site clearance) complete all as specified & directed.

- ditto - all as per item ser No. 1 above here in before but exceeding 200meter depth below ground level and upto 400 RM.

Development of bore wells including flushing out tree roots, site, fine sand by air compressor of suitable capacity not less than 450 CFM at 150 PSI &cover pumping (25% extra capacity pump) to make water free from turbidity till clear weather is obtained from the bore wells completeall as specified and directed (Pumping for minimum 16 hours in two stage of continuous 8 hours with an interval of 01 hour after first 8 hour) The upper limit for duration of development shell be the time technically required to give results of development as per ISS. Nothing extra shall be payable on account of increase in numbers of pumping hours actually required at site in excess of minimum period as above.

Supplying, assembling, jointing and lowering 5.40 mm (minimum) wall thickness 350 mm dia (internal) ERW MS housing pipes, heavy duty conforming to IS-4270-2001 or IS-3589-2001 (Steel tubes used for water wells) upto depth of 60 Mtr below ground level and fixing in position (including necessary cleaning internal and external and painting inside of pipes with two coats of black bitumin paint suitable for drinking purpose) in different depth as directed, plain ended, jointed heavy duty suitable size collar and with electric welding incl 20x4 mm of suitable length MS flat Iron contact guide in each joint (04 Nos of each joint) with butt welding joint complete surrounding the pipe in both ends for development/ expanding of trial bore for new borewell complete all as specified and as directed. Note :- Pipe shall be of 06 m unless required in smaller lengths as per borewell requirement.

Supplying MS reducer 350mm to 250 mm and fixing into bore hole MS pipes ERW grade threaded and socketed joint, 8 mm wall thickness, both ends plain as per IS-4270-2001 or IS-3589-2001 including welding of both ends complete all as specified and directed.

Supplying, assembling, jointing and lowering 5.40 mm (minimum) wall thickness 250 mm dia (internal) ERW MS housing pipes, heavy duty conforming to IS-4270-2001 or IS-3589-2001 (Steel tubes used for water wells) depth exceeding 60 meter to 200 meter below ground level and fixing in position (including necessary cleaning internal and external and painting inside of pipes with two coats of black bitumin paint suitable for drinking purpose) in different depth as directed, plain ended, jointed heavy duty suitable size collar and with electric arc welding 20x4 mm of suitable length MS flat Iron contact guide in each joint (04 Nos of each joint) with butt welding joint complete surrounding the pipe in both ends for Development/ expanding of trial bore for new borewell complete all as specified and as directed. Note :- Pipe shall be of 06 Mtr unless required in smaller lengths as per borewell requirement.

- ditto - all as per item ser No. 6 above here in before but depth exceeding to 200 meter to 220 meter below ground level.

Supply, assembling, fixing and lowering into bore hole 250mm (8") dia nominal bore low carbon galvanized strainer/ slotted pipe with fine slot of suitable size and numbers as per location of intermediate aquifiers, having wall thickness 8mm as per IS screwed and socketed in random lengths of 3 to 6 Mtr including necessary fittings i.e. steel sockets, coupling, jointing and jointing with electric arc welding incl 4 Nos stiffeners of mild steel iron 40x6mm, and painting with two coats of bituminous paint on external surfaces of pipe upto depth of 250 Mtr below ground level complete all as specified and directed.

M&L for yield testing after completion of tube well by continuous pumping for 16 Hrs to determine safe pumping Yeild complete all as specified and directed with the following :- (a) Collection of water samples from bore well and getting them tested chemical and bacteriological analysis from recognized institution approved by Govt Lab. (b) Test on quality of water for drinking purposes.

S&F of 8mm thick MS bail plug for 350 mm bore dia pipe, min 500mm long with strong iron hook of min 25mm dia, screwed & welded to the casing pipe (length of pipe required to be fixed with bail plug will be measured and paid for separately under relevant item.)

S&F of MS well cap suitable for 250 mm dia casing pipe with 4 Nos 18 mm dia nuts , bolts and washers 7 MS clamp fabricated from flat iron 100 x 16 mm thick duly drilled holes of suitable size including painting with two coats of synthetic enamel paint over a coat of red oxide primer including centering guide, end cap, ring and housing clamp, MS Strip, MS Iron Clamp, washers, nut & bolts etc fixed at bottom of casing pipe scomplete all as specified

M&L for electro logging by using computerized composite machine or latest technology for ascertaining the location and probable yield for precise delineation of aquifer complete with submitting report to Engr-in-charge complete all as specified and directed.

Sample starta box made out of 20mm thick veneered particle board with 25mm x 25mm aluminium angle 2mm thick base overall length 1200mm x 750mm x 100mm with top glass sheet sliding type cover with locking arrangement having 12mm thick plywood inside to make compartments of size 100mm x 100mm with soil sample strata obtained from various depths of boring at interval of 3 Mtr each complete mentioning name of tube well, location and starta sample with depth including painting of synthetic enamel paint over to a coat of wood primer complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in block mass concrete below ground level all around the borewell all as specified and directed.

Supply and lay 100 mm bore GI column pipe heavy grade ISI marked in standard length of 3 meter each duly threaded with both ends with and including long threaded heavy duty socket and fittings and lowering into well including supplying, lowering ,fixing, commissioning & testing complete all as specified and directed

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for taking out and laying CI/GI pipe complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed by Engineer-in-Charge.

Removal of surplus spoil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge. (for LT Cable )

Supply, Laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 95 Sqmm 3.5 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified. Note (i) Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items.

Supply, laying, jointing and testing new DI pipe 150 mm bore including special class "K-7" spigot and socketed ends in any length laid in trenches complete all as specified and directed.

Supply, laying, jointing and testing new DI pipe 100 mm bore including special class "K-7" spigot and socketed ends in any length laid in trenches complete all as specified and directed.

Cutting existing CI/DI pipe line and inserting Tee or other fitting fixture to connect line

S&F of CI double flanged Non -return valve, class 'B', High pressure PN 1.6 conforming to ISI marked, including bolts, nuts, washer and rubber packing all as specified and directed of the 100mm dia bore:- Make : Kirloskar/BIR/Minar

S&F of iron fitting such as bends, tapers, (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and directed.

S&F of cast iron sluice valve 150 mm bore with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc complete all as specified

S&F of cast iron sluice valve 100 mm bore with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc complete all as specified

S&F of cast iron non return valve 100 mm bore with flanged ends, ISI mark with jointing material such as nuts /bolts washers and rubber insertion sheet etc complete all as specified

S&F of submersible pump set, Electric driven having discharge 1000 LPM at 84 mtr head including suitable capacity of electric motor not less than 30 HP suitable for operation of 415 volts 50 C/S AC supply Make: Crompton /KSB /kirlosker.

S&F of PVC insulated submersible cable 03 core 1100 Volt AC Supply stranded copper conductor of size 16 sqmm

M&L for double air release valve of size 100 mm bore inl bolts, nuts gaskets if any complete all as specified and directed.

M&L for valve pits of internal dimensions 90cm x 90 cm x 90 cm making good disturbed/dismantled brick work in cement mortar (1:4) plastering surfaces in CM 1:6, 15mm thick and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 35x35x5mm including frame work as per existing size with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.(a) M&L for brick work using sub class 'B' (old size bricks) in CM 1:4 (b) M&L for rendering 15 mm thick in CM 1:4 finishing even and fair (c) M&L for PCC 1:2:4 type B-0 (using cum 12.5 mm graded stone aggregate ) as in coping (d) M&L for any type of mild steel work such as frame sheet 3 mm thick including welding (e) M&L for painting two coats of synthetic enamel paint over a coat of red oxide primer to untreated steel surface & prep of surface.

Earthing complete with galvanised steel earth plate electrode 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below ground level, earth plate connected to GI earthing strip(32x6mm) as earthing lead for transformer/feeder pillar box etc by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical Plate No 5 of MES Sch. part I and testing on completion including necessary excavation and earthwork, expansive soil, adequate common salt, charcoal dust and funnel , PCC(1:3:6) type C-1 pit with precast RCC(1:1.5:3) type A-I cover, 40mm thick reinforced with 6 mm dia MS bars 3 Nos both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with funnel, wire mesh, with 20mm dia GI medium grade watering pipe earthing lead from earth plate to equipment earth point complete all as specified.(GI earthing strip shall be measured and paid separately.)

Taking down GI pipe 20 mm bore medium grade and fitting and supply and fixing new GI tubing medium grade 20 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed (Excavation and earthwork shall be measured and paid for separetely under approprite item)

- ditto - all as per item ser No. 36 above here in before but 25 mm bore

- ditto - all as per item ser No. 36 above here in before but 40 mm bore

- ditto - all as per item ser No. 36 above here in before but 50 mm bore

S&F of water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note :- Two run of 4.00 Sqmm cable one run of 2.50Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.)

S&F of sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and directed.

S&F of MCB, 10 to 32 Amp, SPN, 240 Volt

S&F of factory made sheet metal enclosure distribution board class IP-40 with 200 A rated copper bus bar 240 V, 2 ways single pole and neutral link complete all as directed.

S&F of GI pipe medium grade with all fitting laid in trenches of size 15 mm bore complete all as specified and directed.

M&L for hot water tap of brass/gun metal 15 mm bore complete all as specified and as directed by Engr-in-charge.

S&F of stop cock brass of size 15 mm dia, complete all as specified and as directed by Engr-in-Charge.

S&F of hot water PVC connections for geysers including necessary clamps, nuts and bolts etc. complete all as specified and directed.

S&F of fancy LED Garden light pendent mounted fitting with crome/ brass finis fitting Complete all as specified and directed by Engr-in-Charge

S&F of fancy gate light pendent mounted fitting with crome/ brass finis fitting Complete all as specified and directed by Engr-in-Charge

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductorof size 35 sq. mm 3.5 core.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductorof size 10 sq. mm 2 core.

S&F of TP&N Vertical DB 4 way with MCCB 63 Amp 3 Pole ,as Incomer with Bus Bars, MCB SP 6 to 32 Amp -12 Nos ,Neutral Links, Blanking Plates complete all as specified and directed.

Taking down old unsv MCB and Supply and fixing SP 6 To 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified.

M&L for point wiring with 2.50 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 4 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F of switch piano flush type 16 A, single pole, one way complete all as specified and directed.e.

S&F of socket outlet , 5 pin 16 A, multipurpose flush type complete all as specified and directed

Supply, Instal, commission and test water cooler Supply, installation,commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of size 40/80 complete all as specified and directed by the Engineer-in-Charge.

S&F of wall mounted voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input varaiation between 170 to 285 V, with output voltage stabilzed at 230 V with accuracy + 2.5% and of capacity 3 KVA complete all as specified.

S&F of MCB, 10 to 32 Amp, SP, 240 Volt

S&F of gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm dia complete all as specified and directed.

Supplying and packing pea gravels of size 5.00mm to 8.00mm all around the casing popie and slotted pipe in the well bore to entire depth complete all as specified (volume of pea gravels shall be measured before filling in bore)

somyaenterprises (BID ID -3492025)