Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹19.8 L+₹37,258.95 (1.91%)Rejected-AOC 203 NIVAAN LAXMI SOCIETY PLOT NO 169 SECTOR 19 KHARGAHAR NAVI MUMBAI 410210 | RAIGAD | MAHARASHTRA | 410210 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹20.3 L+₹84,477.90 (4.34%)Rejected-AOC GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹21.1 L+₹1.7 L (8.51%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹21.5 L+₹2.0 L (10.2%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹24.9 L
EMD Value
₹49,900
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KARANJA
CWE KARANJA NAVAL STATION KARANJA URAN RAIGAD - 400704
ADDITION AND ALTERATION AND REPAIR OF NAD HOUSE NO D-105 AT NAVAL STATION KARANJA
2022_MES_559848_1
84183-K/E8
Open Tender
Civil Works
Item Rate
180 days
NAVAL STATION KARANJA
Please refer tender documents
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER (NW) KARANJA
₹49,900
29 Nov 2022
26 Oct 2022
24 Nov 2022
26 Oct 2022
22 Nov 2022
9 Nov 2022
Amount
Surface dressing not exc 15cm depth in soft/loose soil complete all as specified and as directed by Engr-in-charge.
Excavation in trenches not exc 1.5m deep and not exc 1.5m in width in any type of soil and getting out complete all as specified and as directed by Engr-in-charge.
Returning filling in soil including spreading levelling watering and well ramming in layers not exc 25cms complete all as specified and as directed by Engr-in-charge.
Removing excavated materials not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.
Material and labour for cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregate) in foundation filling and mass concrete complete all as specified and as directed by Engr-in-charge.
Formwork for lintel and soffits of floor or roof beams beam haunching including supports, overhangs, etc., also splays between floors and beams etc., complete all as specified and as directed by Engr-in-charge.
Material and labour for PCC 1:1.5:3 type A-1 (Using 20mm graded stone aggregate) as in lintels, beam etc., complete all as specified and as directed by Engr-in-charge.
Supply and fix for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chip with deep quality confirming to FE 500/FE 500D complete all as specified and as directed by Engr-in-charge.
All as per item No.08 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
Material and labour for 20mm thick polymer modified ready mix cement based plaster on external surfaces incl WPC @ 3% by weight of cement complete all as specified and as directed by Engr-in-charge. Note: WPC will be measured and paid separately.
Supply only integral water proofing compound complete all as specified and as directed by Engr-in-charge.
Material and labour for 15mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation old/ new surface exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clean water and allow to dry. Fill visible cracks/ joints by chemistic crack seal caulking compound and allow to dry for 24 hours. Apply a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter apply 2 coats of chemistik PDS-50 (WB high build anti carbonatin coating cum waterproofing) and shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc., complete all as specified and as directed by Engr-in-charge. Note: Painting shall be done by authorised, certified applicator of paint manufactures of paint used. Approval shall be obtained from GE for make/ manufactueres and applicator before engaging in the work.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of new distempered surfaces of walls and applying two finishing coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-charge.
Material and labour for applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge.
Demolition of brick work or stone /boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-charge.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-charge.
Material and labour for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engr-in-charge.
All as per item No.19 here-in-before but except stone.
Material and labour for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto courses hammer dressing sand stone with max depression on face from straight edge held against the dressed surface not exc 20mm complete all as specified and as directed by Engr-in-charge.
Raking out joints /pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed by Engr-in-charge.
Material and labour for key pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of old plastered or unplastered surfaces of ceilings including cornices, etc., and applying one finishing coat of white wash complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described, exc 10cm in width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of old painted steel and iron surfaces of any description exc 10 cm in width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and as directed by Engr-in-charge.
Material and labour for 100mm thick, cement concrete 1:2:4, type B-2 (Using 40mm graded stone aggregate) as in pavings, hardstandings and similar work complete all as specified and as directed by Engr-in-charge.
Material and labour for hard core broken stone of guage not exc 63mm deposited spread and levelled in layers not exc 15cms thick watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge.
Material and labour for 75mm thick PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement floor shall be laid alternate panels inluding necessary form work etc., complete all as specified and as directed by Engr-in-charge.
Material and labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 15mm thick plater in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-charge.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc 1.5 sqm each complete all as specified and as directed by Engr-in-charge.
All as per item No 31 here-in-before but exc 1.50 sqm and not exc 4 sqm.
Supply and fix for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed by Engr-in-charge.
Supply and fix for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed by Engr-in-charge.
Supply and fix for 4mm thick sheet glass, plain glass ordinary quality type, glazing with oil putty area exc 1.5 sqm each pane complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design /pattern (DG 104), with approved standard section and fixed to existing window frame with CP brass/ stainless steel screw not less than 50mm and @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section (28x19x2mm thick) around the opening complete all as specified and as directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed by Engr-in-charge.
Material and labour for vitrified ceramic (dark shade) tiles 10mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:6 complete all as specified and as directed by Engr-in-charge.
Supply and fix for coloured non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM 1:4 complete all as specified and as directed by Engr-in-charge.
Material and labour for coloured glazed ceramic tiles in vertical surface 350x250x7mm /450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 10 litres capacity PVC flushing tank, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, PVC flush pipe, float and handle including brackets and waste pipe complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including traps, seat and cover; flush pipe and connecting pipe, inlet and overflow pipes for flushing cistern including jointing to socket of flushing rim and connecting pipe to union of flushing cistern complete all as specified and as directed by Engr-in-charge.
Supply and fix for vitreous china squatting pan orissa pattern, size 580x440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti-syphonage pipe etc., and making good to floors complete all as specified and as directed by Engr-in-charge.
Supply and fix for wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI /angle iron brackets embedded in concrete block including brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and as directed by Engr-in-charge.
Supply and fix for pillar tap cast copper alloy fancy type with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nuts screwed for iron pipe of 15mm bore complete all as specified and as directed by Engr-in-charge.
Supply and fix for bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated complete all as specified and as directed by Engr-in-charge.
Supply and fix for 15mm fancy type chromium plated stop valve /angle valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and as directed by Engr-in-charge.
Supply and fix for health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge.
Supply and fix for steel water tubing medium grade 20mm bore galvanised with all fitting to walls etc., complete all as specified and as directed by Engr-in-charge.
Supply and fix for steel water tubing medium grade 15mm bore galvanised with all fitting to walls etc., complete all as specified and as directed by Engr-in-charge.
Supply and fix for PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-charge.
Supply and fix for wash hand basin brass CP mixer 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.
Supply and fix for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs PVC cabinet mirror of size 550x450x124mm complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs brass CP shower rose 150mm size complete all as specified and as directed by Engr-in-charge.
Supply and fix for second class hardwood plain, solid, straight, chowkat for frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge.
Supply and fix for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge.
Supply and fix for second class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium handles 150mm size, cast type, anodised complete all as specified and as directed by Engr-in-charge.
Supply and fix for overall length of cover plate 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by Engr-in-charge.
Supply and fix for 100mm butt hinges stainless steel complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/ sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/ sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and as directed by Engr-in-charge.
Supply and fix in repair cast iron nahani trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed by Engr-in-charge.
Supply and fix for frosted glass 4.0mm thick, pin head type not exc 0.5 sqm in each pane and fixed complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm with aluminium wire staples complete all as specified and as directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge.
Supply and fix for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed by Engr-in-charge.
Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engr-in-charge.
Supply and fix for mild steel work in framed brackets of angle or tees with web flanges cut to shape, drilled and countersunk of screws, including bending and welding angles, as necessary, gusset plates, riveting, etc., not exc, 10 kg each bracket, and hanging also fastening and fixing complete conforming to Gde Fe 290, Gde E-165 complete all as specified and as directed by Engr-in-charge.
Supply and fix for mild steel plate plain, square cut or notched (ordinary or counter sunk), forming holes with riveted, bolted or welded attachement etc., and hanging also fastening and fixing complete conforming to Gde Fe 410 W (Gde E-250 Quality A) complete all as specified and as directed by Engr-in-charge.
Supply and fix for steel work in tublar trusses including special shaped washer etc., complete using ERW or induction butt welded tubes confirming o IS 1161-1998 grade St 240 complete all as specified and as directed by Engr-in-charge.
Supply and fix for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.
Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.
Material and labour for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface and applying one coat of pink primer complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and apply two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-charge.
Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering and removal of debris outside MOD complete all as specified and as directed by Engr-in-charge. Note: Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work.
Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed by Engr-in-charge.
Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with waters to remove dusts etc., complete all as specified and as directed by Engr-in-charge.
Material and labour for brushing neat cement slurry with 3kg/sqm complete all as specified and as directed by Engr-in-charge.
Material and labour for PCC 1:2:4 type B2 (Using 12.5mm graded stone aggregate) as in concrete padding laid to required slope including finishing the concrete surface fair and even without using extra cement complete all as specified and as directed by Engr-in-charge.
Material and labour for 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 for laying roof finish as padding finished with WPC 3% by weight of total cement complete all as specified and as directed by Engr-in-charge. Note: Integral WPC shall be measured and paid separately.
Material and labour for apply oil bound bitumen primer @ 0.40 Litre / sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface complete all as specified and as directed by Engr-in-charge.
Material and labour for APP polymeric membrane minimum weighting 3.5 kg/ sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/ sqm) laid on primed surfaces by torch application method complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of new surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces complete all as specified and as directed by Engr-in-charge.
Supply and fix for CI sand cast pipe, waste and vent pipe duly BIS marked in any length with or without ears with cement joint of 75mm bore fixed in trenches or floor complete all as specified and as directed by Engr-in-charge.
All as per item No. 89 here-in-before but dia of pipe 100mm.
Supply and fix for CI bends duly BIS marked of (any radius) with duck’s foot or heel rest of 75mm bore complete all as specified and as directed by Engr-in-charge.
Supply and fix for CI bends duly BIS marked of (any radius) with duck’s foot or heel rest of 100mm bore complete all as specified and as directed by Engr-in-charge.
Supply and fix for cast iron cowl 75mm bore complete all as specified and as directed by Engr-in-charge.
Supply and fix for cast iron floor trap with grating including jointing to waste pipe fixed with cement concrete type B-1 (1:2:4), 75mm dia complete all as specified and as directed by Engr-in-charge.
Supply and fix for water tank with rotational moulded polythene water storage tank (cylindrical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position complete all as specified and as directed by Engr-in-charge.
Supply and fix for gun metal globe or gate valves 20mm nominal bore dia with gate with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and as directed by Engr-in-charge.
Supply and fix for toilet paper holder of stainless steel fixed to walls with CP screws complete all as specified and as directed by Engr-in-charge.
Supply and fix for ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm dia complete all as specified and as directed by Engr-in-charge.
Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening complete all as specified and as directed by Engr-in-charge.
Supply and fix for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top and bottom rail mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site complete all as specified and as directed by Engr-in-charge.
Supply and fix for butt hinges size 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21 complete all as specified and as directed by Engr-in-charge.
Supply and fix for 125mm long extruded aluminium alloy handles, fabricated type complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium anodized, barrel tower bolt of extruded section, length of bolt 150mm complete all as specified and as directed by Engr-in-charge.
Supply and fix for aluminium anodised alloy curtain rails fixing with brackets, stops, rollers etc., complete all as specified and as directed by Engr-in-charge.
Supply and fix for 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters and all other fittings etc., fixed with screws to timber frame work complete all as specified and as directed by Engr-in-charge.
Supply and fix for 18/19mm thick prelaminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters and all other fittings etc., fixed with screws to timber frame work complete all as specified and as directed by Engr-in-charge.
Supply and fix in repair 30mm width continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed by Engr-in-charge.
Supply and fix for 150mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed by Engr-in-charge.
Supply and fix in repair 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed by Engr-in-charge.
Material and labour for 75mm thick PCC type D-2 1:4:8 (Using 40mm graded stone aggregate) as in sub base floor complete all as specified and as directed by Engr-in-charge.
Material and labour for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed by Engr-in-charge.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-charge. Note: Only punned thickness shall be measured and paid separately.
Material and labour for reinforced concrete pipes 150mm bore, class NP2, laid and jointed with collars complete all as specified and as directed by Engr-in-charge.
Material and labour for cement concrete 1:4:8 type D-2 in bed to pipe including forming cradles 150mm internal dia after the pipes are laid jointed and tested complete all as specified and as directed by Engr-in-charge.
Material and labour for cutting into the existing manhole for connecting new drain pipe 150mm internal dia metre making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished even and smooth benching as required complete all as specified and as directed by Engr-in-charge.
Material and labour for point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using colour code drawn through concealed PVC conduit with all modular accessories like metal flush box, cover plate frame plates of suitable sizes and including 1.5 sqmm PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour) to common earth and connecting to earth dolly for the following complete all as specified and as directed by Engr-in-charge. Note: The quoted rates includes for neccessary wall cutting/chassing. One light /fan/ call bell point controlled by one switch.
One 5 pin socket outlet 5 Amps on independent board.
One 5 pin socket outlet 5 Amps on same board.
All as per item No. 116 here-in-before but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 1.5 sqmm multi strandard insulated unsheathed copper wire for continues earth on independent board.
Supply and fix for switch modular single pole one way, 6 Amp (ISI marked) complete all as specified and as directed by Engr-in-charge.
Supply and fix for modular bell push flush type 6 Amp (ISI marked) complete all as specified and as directed by Engr-in-charge.
Supply and fix for modular socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and as directed by Engr-in-charge.
Supply and fix for modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and as directed by Engr-in-charge.
Supply and fix for switch modular single pole one way, 16 Amp (ISI marked) complete all as specified and as directed by Engr-in-charge.
Supply and fix for ceiling rose PVC /polycarbonate, isolated body surface bakelite 65mm dia three terminals complete all as specified and as directed by Engr-in-charge.
Supply and fix for ding dong door bell electric suitable for AC 230 volt, single pole complete all as specified and as directed by Engr-in-charge.
Supply and fix for modular type fan 5 step regulator for ceiling fan complete all as specified and as directed by Engr-in-charge.
Supply and fix for LED batten with 20W LED tube light in wall /surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc., surface and wall mounted LED batten, Engineering plastic housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete all as specified and as directed by Engr-in-charge.
Supply and fix for LED batten with LED tube light 9/ 10W 2 feet in wall/ surface connecting with all required accessories like flexible cable from ceiling rose etc., complete all as specified and as directed by Engr-in-charge.
Supply and fix for double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, earth stud, din rail, polymade terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door openable, including taking out old unserviceable MCB DB any size/ type complete all as specified and as directed by Engr-in-charge.
Supply and fix for 6 to 32 Amps MCB single pole 240 V 10 KA (C-Series) complete all as specified and as directed by Engr-in-charge.
Supply and fix for MCB double pole RCBO 240 volts AC 40 Amps (C-series) of 30 MA complete all as specified and as directed by Engr-in-charge.
Supply, fixing, stringing and drawing submain wiring with 2 runs of single core 6 sqmm PVC insultaed, unsheathed multistranded copper conductor cable, 1100 Volts conforming to IS-694, 1990 with ISI mark, drawn through concealed PVC conduit of suitable size including one run of 6 sqmm PVC insulated multistranded copper conductor cable, 1100 Volts grade conforming to IS -694, 1990 green colour for earth continuity and connecting up to common earth dolly complete all as specified and as directed by Engr-in-charge. Note: Two run of 6 sqmm and one run of 6 sqmm earth wire will be measured as one running metre.
Supply and fix for exhaust fan single phase 250mm sweep including all connected accessories and making necessary cutting and chassing to make holes on wall to fix the exhaust fans complete all as specified and as directed by Engr-in-charge.
Supply and fix for ceiling fan 1200mm sweep, BLDC (Brushless direct current) including all accessories like rubber bush, clamps, nuts, screws, canopy and suitable down rods alongwith three core 1.5 sqmm multistranded unsheathed copper cable for making connection from ceiling rose to fan complete all as specified and as directed by Engr-in-charge.
Supply and fix for LED building security light fitting with suitable size bracket/ angle to fit security light of 45w IP 66 protection LED complete all as specified and as directed by Engr-in-charge.
Supply, fixing, jointing, connecting and testing in trenches XLPE/ PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches/ ducts of 2 core 10 sqmm including taking out cable cover and cable complete all as specified and as directed by Engr-in-charge.
Supply, fixing, jointing, connecting and testing in trenches XLPE /PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches/ ducts of 2 core 16 sqmm including taking out cable cover and cable complete all as specified and as directed by Engr-in-charge.
Supply and laying un-reinforced precast concrete cable cover class LV type 1, flat size 250x150x40mm complete all as specified and as directed by Engr-in-charge.
Material and labour for GI pipe light grade with all fittings complete laid in trenches for 40mm bore of pipe complete all as specified and as directed by Engr-in-charge.
Material and labour for earthing complete with galvanised steel earth plate electrode size 600x600x6mm thick burried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point including testing on completion complete all as specified and as directed by Engr-in-charge. Note: The unit rate includes for protection pipe and GI strip dia from top of earth plate upto 2+5 meter above ground level.
Supply and fix for new generation, energy saving IP 65 bamboo light 8W eco friendly long life asthetically designed aluminium landscape luminarie for diffuse lightening with high power LED complete all as specified and as directed by Engr-in-charge. Note: Excavation and PCC work will be measured and paid separately.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .