Dismantling the existing damaged 2 Nos. of 13 person lifts and providing 2 Nos. of 13 person lift for the existing commissioner office building at COP Campus in Coimbatore City.

Amount

ANNEXURE-I 8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) b) In Stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

f) In Fourth Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e) In Fourth Floor.

18.1 : Formwork using M.S.Sheet b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

38.7 : Plastic Emulsion PAINT including primer

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

78 : Earthing Station IS3043 (Type I)

237 : Providing two legged scaffolding using 15cm diameter casurina props. 13m height

ANNEXURE - II A1: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 12 watts LED bulb for bulk head fittings

A2: Supply and fixing of LED water fight Bulk head fitting for 12W LED Bulb

A3: Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core 1.1 K.V. grade cable with continuous earth by means of 1.5 sqmm PVC insulated unsheathed single core 1.1 KV grade cable in confirming to IS 694/1980 (Open wiring) a. Light point with ceiling rose

A4 : Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core, 1.1 K.V. grade cable with continuous earth by means of 1.5 sqmm PVC insulated unsheathed single core 1.1 KV grade cable in confirming to IS 694/1980 for 5 amps 5 pin plug socket point @ Convenient Places.(Open wiring)

A5: Supply and run of 2 of No. 8 copper wire for earth connections to the individual tenements from the earth bus etc.,

A6: Supplying, fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess including interconnection, painting etc., as requires ( The enclosure size shall be suitable for receving the incoming and out going cable directly) a. 40 A TPN 10 KA MCB

A7: b. 10/20/32A DP MCB

A8: c. 63A TPN MCB

A9 Supply and fixing of 25 mm x 6 mm tin coated copper flat on wall

A10: Supply and Fixing of UG cables on Walls / Ceiling , Charges for conveying and fixing of following UG cable in above GL a) 3.5 Core 25 Sqmm Cable

A11: b) 2 Core 10 Sqmm Cable

A12: Supply and fixing the following copper Crimping Lugs suitable for the following UG cable a) 3.5 Core 25 Sqmm Cable

A13: b) 2 Core 10 Sqmm Cable

A14: Supply and fixing the following copper Cable Gland suitalbe for the UG cable etc to complete. a) 3.5 Core 25 Sqmm Cable

A15: b) 2 Core 10 Sqmm Cable

A16: Dismantling the existing damaged Reniforced Cement Concrete with out affecting the adjacent structures, including the hire charges of tools and plants, and scaffolding if necessary, and clearing the dismantled materials away from the site etc.,

A17: Dismantling the damaged dadooing walls in 10mmthick with cement mortar with granite tiles without affecting the adjacent structures in all fllors including the cost of required tools and plants and clearing the debris away from the site etc.,

A18 : Dismantling the damaged brick works of cement mortor in all floor without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris 2km away from the site etc.,

A19: Thorough scrapping and painting the old wall one coats with ready mixed plastic emulsion paint of first class quality paint of approved colour including cost of necessary brushes, labour chargs, aptty etc.,

Lift: A20: Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.