Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹42.0 L+₹5.7 L (15.8%)Rejected-Finance 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹48.0 L+₹11.7 L (32.2%)Rejected-Finance P O GARNAI VILLAGE LADHYALA MALHAR TEHSIL DISTT UDHAMPUR J K 182121 | UDHAMPUR | JAMMU AND KASHMIR | 182121 | L3 | Rejected-Finance Not being lowest |
Tender Value
₹37.6 L
EMD Value
₹75,200
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
PROVN OF SEDIMENTATION TANK AND ALLIED WORKS AT JIB FILTERATION PLANT UNDER GE (UTILITIES) UDHAMPUR
2023_MES_614165_2
CWE/U(N)-67/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
UDHAMPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹75,200
Yes
16 May 2024
8 Apr 2024
4 May 2024
8 Apr 2024
29 Apr 2024
16 Apr 2024
Amount
Excavation over areas not exc. 1.5m deep in any type of soil and getting out, complete all as specified and as directed.
Excavation over areas exc. 1.5m deep and n. exc 3m deep in any type of soil and getting out, complete all as specified and as directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type soil, complete all as specified & directed.
Plain cement concrete 1:3:6, (nominal mix), type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified & directed.
RCC M-30, design mix, using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
RCC M-30, design mix, using 20mm graded crushed stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footing; including attached pilasters and buttresses using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
RCC M-30, design mix, using 20mm graded crushed stone aggregate as in as in beams, cantilevers, bressummers, lintels over 1.5m span, using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
Form work to sides of concrete foundation, footings, bases of columns, rafts and raft beam and similar work; vertical or to batter for curved finished surfaces of concrete, complete all as specified & directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for curved finished surfaces of concrete, complete all as specified & directed.
Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beams for curved finished surfaces of concrete, complete all as specified & directed.
15mm thick plastering in cement mortar 1:3 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
Supply only liquid water proofing compound, complete all as specifed.
Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, , complete all as specified & directed.
Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, , complete all as specified & directed.
100mm thick plain cement concrete 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in plinth protection, surface finished even and fair, complete all as specified.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed.
Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.
Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint, complete all as specified.
100mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in path surface finished even and smooth without using extra cement, complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade E-165, complete all as specified.
Hard core of gauge not exc 63mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified.
Coloured machine pressed / vibro mechenically floated interlocking cement paver block ISI marked, 50% grey and 50% coloured, any shape and size, conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over and including 25mm thick sand filling including spreading, levelling, watering and well ramming complete all as specified and directed. Shape & size shall be approved by the GE.
75mm thick Plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in subbase of flooring/paving, surface finished even and fair without using extra cement, complete all as specified and as directed.
Plain cement concrete 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate edging of path and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.
Supply, Installation, commisioning and testing of horizontal centrifugal multi stage pump set of cap 30 HP (22 KW) with bronze impeller casing Cl capable to handle raw water having 4550 LPM at effective head of 15 mtr minimum 80% efficiency coupled to driver rating 30 HP. 1475 RPM squirrel cage induction motor as per manufacturer design with all standard fixing coupled through flexible copling to be connected with suction and delivery side with common base (ISI marked) on delivery side with common base frame of MS variable, suitable for 3 phase 50 Hz, 440 Volt energy efficient variable voltage and variable frequency complete all as specified and directed by Engr-in-Charge. Make: Kirloskar or equivalent model of Mather Platt/CG
Fully automatic star delta motor starter in sheet metal enclosure with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 30 HP as per Havells cat part No. IHHASDWB complete all as specified and directed by Engr-in- Charge. Make-Havells/Indo Asian/L&T
PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 70 sqmm complete all as directed by Engr-in-charge
Copper thimble suitable for 70Sqmm single core copper cable complete, all as specified & directed by Engr-in-Charge.
Mild steel tubes medium grade galvanised plain end with all fittings laid in trenches of size 150 mm bore including all fittings such as bends (any type, radius or angle). tapers any type (straight, bend, increasing, decreasing or double socket etc) TEE pieces single branch, Y Junction, double branch, cross collars, cap and plugs, MS flanges complete bends, TEE pieces, collars, elbow, tail piece etc complete all as specified and directed by Engr-in-Charge. Note:- i) Flanges to be provided at every 6 m length of plain end pipe or shorter length as directed by Engineer-in-Charge. Flange will be welded to the GI pipe and gasket to be provided between two flanges and will be fixed with 08 Nos of nuts and bolts (M16 Type) at each jointing. Flanges will be of IS-6392 specifications. The cost of flanges, nuts & bolts, gaskets and connecting of flanges to pipeline by welding will be deemed to be included in the quoted item rate.
Item 29 Contd... ii) All standard fittings such as bends (any type, radius or angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) TEE pieces single branch, Y Junction, double branch, cross collars, cap and plugs, MS flanges complete bends, TEE pieces, collars, elbow, tail piece etc jointing are deemed to be included in the quoted item rate. Make of fittings-ISI marked. (iii) Jointing of pipe line will be done through flanging only and as directed by Engr-in-Charge. (iv) Excavation and earthwork will be measured and paid separately. (v) Any special fittings to be fabricated at site as per typical site condition will be measured and paid seprately. (vi) Welding of flanges to be done by trained personnels at site and included in the quoted rate for normal flange joints for nominal length of pipes. However if the welding of pipes (other than normal flanged joint at nominal length) is required the same shall be measured and paid separately. (vii) Execution of work should be carried out without hampering the daily routine water supply.
Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 150 mm bore, complete all as specified and directed.
Construction of PCC plateform of 1:2:4 type B-1 over 75 mm thick 1:4:8 type D-2 for foundation of pump with motor of capacity 30 HP having the height of 30 cm above GL and 30 cm below ground, consisting at plateform of size 1.8 x1.8x 0.6 m including grouting nuts and bolts of dia 16 mm and 65 cm long suitable for pump set and motor complete including excavation, returning, removal necessary form work & 15 mm thick cement plaster in cm 1:4 complete all as specified and directed by Engr-in-charge
Earthing of machinery/equipment Installed at power house/substation with galvanised steel earth plate electrode 60x60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (02 x Panel & 02 x Motor each)
Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance ± 10% conforming to IS-3589, ISI marked alongwith circular welding /flange joints including nut bolts, washers, flanges, etc laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified directed
Cast iron sluice valve suitable of size 200 mm (PN 1.6) ISI Marked with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers, complete all as specified and directed.
Cast iron non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers, complete all as specified and directed.
R K BUILDERS
m/s sushila devi
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .