Tirunelveli District JJM 2022 23 SVS provide Functional Household Tap connection to Rural Households in Adaiyakarunkulam Village Panchayats in Ambasamudram Panchayat Union in Package no.01

Amount

1) Construction of 20000 litre OHT and Extension of pipe line and Providing FHTCs (115 Nos) at Kalsundu colony in in Adiyakarukulam Pt.

Delivery line

Supply and delivery of 75 mm dia 4 KSC PVC pipe including all cost and conveyance etc., complete

Supply and delivery of 65mm GI pipe including all cost and conveyance etc., complete

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Laying of 75mm PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Laying of 65mm to 150mm dia GI pipes with lead of 200m lowering into trench, laying in proper grade, alignment etc. complete

Supply and delivery of Woltman model with removal mechanism water meters, (no domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accridiated lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.

80mm water meter

Dirt box

Errection charges

CONSTRUCTION OF 20000 LITRES CAPACITY SERVICE RESERVOIR (7.50M STAGING HEIGHT)

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

hard soil For first depth of 2m

SDR not requiring blasting For first depth of 2m

MR and DMR not requiring blasting or first depth of 2m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

1.50m to 4.50m Below GL

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

Below GL upto 3.30m

Above GL (+3.300 - +4.300m)

Above GL (+6.300 - +7.300m)

CURVED SURFACE:-

Above GL (0.000 - +3.300m)

SQUARE COLUMN:-

Below GL upto 3.30m

Above GL (+3.300 - +4.300m)

Above GL (+4.300 - +5.300m)

Above GL (+5.300 - +6.300m)

Above GL (+6.300 - +7.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Cement painting two coats with best approved quality and colour cement paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for providing access to Roof top with suitable inclined length, bottom anchorage and including transportation charges etc., complete.

Supplying and fixing of CI manhole frame and cover of size 0.75mx0.75mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., complete and as directed by TWAD Board Officers.

Refilling with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Provision for pipes & specials for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve etc., complete and as directed by TWAD Board officers

50 mm G.I. Pipe

65 mm G.I. Pipe

50 mm dia PVC Threaded coupler

75 mm dia PVC Threaded coupler

65 mm G.I. Tee

65 mm G.I. Bend

50 mm G.I. Bend

50 mm dia G.I. Coupling

65 mm dia G.I. Coupling

50 mm G.I. Flange set

65 mm G.I. Flange set

65 mm G.I. Elbow

50 mmG.M. Gate Valve with wheel

65 mmG.M. Gate Valve with wheel

65 mm Hex Nipple

PROVIDING FUNCTIONAL HOUSE HOLD TAP CONNECTIONS

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Supply and Delivery of 20 mm dia PVC pipe as per BIS 4985/2000 with ISI Marking to site of works

Lowering and laying the 20 mm dia PVC pipes and specials to trench,laying to proper grade and alignment ,jointing with pvc coupler and specials fixing with solvent cement paste etc.,complete

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supply and delivery of 75 mm x 20 mm SADDLE PIECE confirming AS PER IS 7834/1987 for tapping outlet suiting for , 3/4” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Supply & delivery of 20mm PVC Elbow

cutting 20mm PVC Pipes and specials true axis and finishing the end complete

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

2) Construction of 20000 litre OHT and Extension of pipe line and Providing FHTC (196 Nos) at Manthai colony in Adayakarunkulam Pt.

Delivery line

Supply and delivery of 75 mm dia 4 KSC PVC pipe including all cost and conveyance etc., complete

Supply and delivery of 65mm GI pipe including all cost and conveyance etc., complete

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Laying of 75mm PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Laying of 65mm to 150mm dia GI pipes with lead of 200m lowering into trench, laying in proper grade, alignment etc. complete

Supply and delivery of Woltman model with removal mechanism water meters, (no domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accridiated lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.

80mm water meter

Dirt box

Errection charges

CONSTRUCTION OF 20000 LITRES CAPACITY SERVICE RESERVOIR (7.50M STAGING HEIGHT)

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

hard soil For first depth of 2m

SDR not requiring blasting For first depth of 2m

MR and DMR not requiring blasting or first depth of 2m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

1.50m to 4.50m Below GL

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

Below GL upto 3.30m

Above GL (+3.300 - +4.300m)

Above GL (+6.300 - +7.300m)

CURVED SURFACE:-

Above GL (0.000 - +3.300m)

SQUARE COLUMN:-

Below GL upto 3.30m

Above GL (+3.300 - +4.300m)

Above GL (+4.300 - +5.300m)

Above GL (+5.300 - +6.300m)

Above GL (+6.300 - +7.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Cement painting two coats with best approved quality and colour cement paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for providing access to Roof top with suitable inclined length, bottom anchorage and including transportation charges etc., complete.

Supplying and fixing of CI manhole frame and cover of size 0.75mx0.75mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., complete and as directed by TWAD Board Officers.

Refilling with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Provision for pipes & specials for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve etc., complete and as directed by TWAD Board officers

50 mm G.I. Pipe

65 mm G.I. Pipe

50 mm dia PVC Threaded coupler

75 mm dia PVC Threaded coupler

65 mm G.I. Tee

65 mm G.I. Bend

50 mm G.I. Bend

50 mm dia G.I. Coupling

65 mm dia G.I. Coupling

50 mm G.I. Flange set

65 mm G.I. Flange set

65 mm G.I. Elbow

50 mmG.M. Gate Valve with wheel

65 mmG.M. Gate Valve with wheel

65 mm Hex Nipple

PROVIDING FUNCTIONAL HOUSE HOLD TAP CONNECTIONS

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Supply and Delivery of 20 mm dia PVC pipe as per BIS 4985/2000 with ISI Marking to site of works

Lowering and laying the 20 mm dia PVC pipes and specials to trench,laying to proper grade and alignment ,jointing with pvc coupler and specials fixing with solvent cement paste etc.,complete

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supply and delivery of 75 mm x 20 mm SADDLE PIECE confirming AS PER IS 7834/1987 for tapping outlet suiting for , 3/4” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Supply & delivery of 20mm PVC Elbow

cutting 20mm PVC Pipes and specials true axis and finishing the end complete

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

3) Extension of pipe line and Providing FHTC (321Nos) at sivasakthi nagar in Adayakarunkulam

Delivery line

Supply and delivery of 75 mm dia 4 KSC PVC pipe including all cost and conveyance etc., complete

Supply and delivery of 65mm GI pipe including all cost and conveyance etc., complete

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Laying of 75mm PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Laying of 65mm to 150mm dia GI pipes with lead of 200m lowering into trench, laying in proper grade, alignment etc. complete

Supply and delivery of Woltman model with removal mechanism water meters, (no domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accridiated lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.

80mm water meter

Dirt box

Errection charges

PROVIDING FUNCTIONAL HOUSE HOLD TAP CONNECTIONS

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Supply and Delivery of 20 mm dia PVC pipe as per BIS 4985/2000 with ISI Marking to site of works

Lowering and laying the 20 mm dia PVC pipes and specials to trench,laying to proper grade and alignment ,jointing with pvc coupler and specials fixing with solvent cement paste etc.,complete

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supply and delivery of 75 mm x 20 mm SADDLE PIECE confirming AS PER IS 7834/1987 for tapping outlet suiting for , 3/4” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Supply & Jointing 20mm PVC Elbow

cutting 20mm PVC Pipes and specials true axis and finishing the end complete

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

4) Extension of pipe line and Providing FHTCs (164 Nos) at Ulasanagar in Adayakarunkulam Panchayat

Delivery line

Supply and delivery of 75 mm dia 4 KSC PVC pipe including all cost and conveyance etc., complete

Supply and delivery of 65mm GI pipe including all cost and conveyance etc., complete

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Laying of 75mm PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Laying of 65mm to 150mm dia GI pipes with lead of 200m lowering into trench, laying in proper grade, alignment etc. complete

Supply and delivery of Woltman model with removal mechanism water meters, (no domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accridiated lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.

80mm water meter

Dirt box

Errection charges

PROVIDING FUNCTIONAL HOUSE HOLD TAP CONNECTIONS

Earth Excavation and depositing on bank for with an initial lead and lift as per hard gravely soil for pipe line for 20 mm PVC Pipe. as per Standard Specifications 20B

Supply and Delivery of 20 mm dia PVC pipe as per BIS 4985/2000 with ISI Marking to site of works

Lowering and laying the 20 mm dia PVC pipes and specials to trench,laying to proper grade and alignment ,jointing with pvc coupler and specials fixing with solvent cement paste etc.,complete

Refilling the pipe line with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supply and delivery of 75 mm x 20 mm SADDLE PIECE confirming AS PER IS 7834/1987 for tapping outlet suiting for , 3/4” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm)

Supply & Jointing 20mm PVC Elbow

cutting 20mm PVC Pipes and specials true axis and finishing the end complete

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Earth work excavation in the Existing CC Pavement including all labour charges etc complete

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

MR.RAJU CONTRACTOR