REPAIR AND REPLACEMENT OF SAINTARY FITTINGS, TILING, ROOF SHEET, JOINERY ITEMS AND FALSE CEILING IN ZONE A AT BB CANT, SRINAGAR

S&F 20mm thick boarding clean sawn as in eaves board fixed with nails including dismantling old wooden boarding fixed in any position, complete all as specified and directed.

S&F 15 mm thick 2nd class soft wood clean sawn boards or planks, width n.exc. 25cm as in wall boarding including dismantling old wooden boarding fixed in any position, complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall including dismantling old wooden boarding fixed in any position, complete all as specified and directed.

M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work including dismantling old wooden boarding fixed in any position, complete all as specified and directed.

M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed including dismantling old wooden boarding fixed in any position, complete all as apecified and directed.

M&L 2nd class soft wood (kail) as in scantling clean sawn, Dismantling timber scantling 40 sqm and over in section in any position as in unframed/framed, work complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed.

S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc, complete all as specified and directed.

S&F 2nd class soft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqcm secured with nails or brads, complete all as specified and directed.

M&L for 6mm thick Veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work®, fixed in ceiling incl dismantling of old ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed.

S&F Solid PVC wall lining consistingof 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame incl dismantling of old ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame, complete all asspecified and directed.

S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions incl dismantling of old ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers or 'J' hooks incl dismantling old plain or corrugated steel sheeting, any gauge thickness, complete all as specified and directed

S&F pre-painted galvaturme aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in wall, fixed with self tapping screws and washers or 'J' hooks incl dismantling old plain or corrugated steel sheeting, any gauge thickness, complete all as specified and directed

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling old plain sheet of any gauge or thickness, complete all as specified and directed

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof/wall cadding, wall etc. incl dismantling old plain sheet of any gauge or thickness, complete all as specified and directed

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0 or Fe 310-0 incl dismantling wrought iron or mild steel work of any position & description, complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated in Fe-290 (Gde E165) etc incl dismantling wrought iron or mild steel work of any position & description, complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Steel Fe 410 -W(Gde-E- 250) quality-A etc incl dismantling wrought iron or mild steel work of any position & description, complete all as specified and directed.

M & L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L PBS roll 20 meter long and 100 cm wide type-III weight 40 Kg per roll (As per sample), complete all as specified and directed.

S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below, complete all as specified and directed.

S&F Powder coated aluminium decorative grill of size of mesh 75mm fixed with doors, window for safety of glass etc., complete all as specified and as directed.

Taking down aluminum door/windows including frame if required and repair the same including repair of rubber bidding,aluminum clip,adjusment of glasses,repair/ repalacement of floor spring or hydraulic door closer with oiling or greesing etc.ajusment of horizontal, vertical or middle style, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floors finished even and fair, complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement, complete all as specified and directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete as specified and directed.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base to paving, complete all as specified and as directed.

M&L for Plain cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching of drain and similar work etc complete in foul conditions, complete all as specified and directed.

M&L for Plain Cement Concrete (1:2:4) type C2 (using 40mm graded crushed stone aggregate) as in foundation concrete etc., complete all as specified and directed.

M&L for Coloured Chequred cement concrete tiles 30cm x 30 cm x 25 mm thick, including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with grey cement and pigment, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment, complete all as specified and directed.

M&L for sand cushning 25mm thick for interlocking tiles, complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and including dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises, complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and including dismantling floor, hearth or wall tiling, including cement mortar bedding and removing rubbish off the premises, complete all as specified and directed.

M&L for Non skid coloured ceramic tiles tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm on vertical surfaces such as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 10mm thick backing coat in cement mortor 1:3 (if reqd in any portion) and including dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 10mm thick backing coat in cement mortor 1:3 (if reqd in any portion) and including dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm as in floors set and jointed in neat cement slury and pointed in white or coloured to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and including dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured the shade of tiles, over and including 10mm thick backing coat in cement mortor 1:3 (if reqd in any portion) and including dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite including dismantling old stone slab and tiles, complete all as specified and directed.

Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick laid over and including 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing including dismantling old stone slab and tiles, complete all as specified and directed.

Material and labour for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar etc., over and including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match including dismantling old stone slab and tiles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, including demolition of old brick work of any position, complete all as specified and directed.

M&L for walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 and pointed flush the surface in contact with earth in same mortor as the work proceeds including necessary weep holes at 2 metre c/c (staggered) as in retaining wall, including demolition of old stone work of any position complete all as specified and directed.

Description all as per Srl item No. 48here-in-before, but except stone but incl demolition of old stone wk of any position complete all as specified and directed.

Racking out joints / pointing to random rubble masonry in CM 1:4, complete all as specified and directed.

M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and fair and applying two coat of distemper oil emulsion, white or tinted over a coat of primer including taking down old cement plaster on brick or stone walls, complete all as specified and directed.

M & L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and fair and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer including taking down old cement plaster on brick or stone walls, complete all as specified and directed.

Complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description n exc 1sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1sqm but n. exc 2 sqm each, complete all as specified and directed.

S&F 2nd class soft wood plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and as directed.

S&F 35 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers, complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a), complete all as specified and as directed .

S&F 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and as directed .

S & F 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, Ditto, complete all as specified and as directed.

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators, partations with one or more rebates including joining cleat for fixing in repair etc. complete all as specified and directed.

S & F sheet glass 5.5 mm thick ordinary quality and glazing with rubber beading in square/rectangular in each pane, complete all as specified and directed.

S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work including dismantling old wooden boarding fixed in any position, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings, complete all as specfied and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm, complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm, complete all as specified and directed.

S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed,complete all as specified and directed.

S&F 150 mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100 mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed

S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair, complete all as specified and directed.

S & F in repair 140mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor, complete as all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed incl S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S & F in repair curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

S&F GI water tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking down old steel tubing and fittings of any position, complete all as specified and directed.

S&F GI water tubing medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking down old steel tubing & fittings of any position, complete all as specified and directed.

M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil incl taking down old spun yarn lagging of any type, complete all as specified and directed.

M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil incl taking down old spun yarn lagging of any type, complete all as specified and directed.

S&F in repair, plate rack of overall size 24 x 24 x 10 Inch made out of 0.63mm thick stainless steel , complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm, complete all as specified and directed.

S&F in repair Waste pipe 40 mm for SINK with coupling, complete all as specified and directed.

S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass, complete all as specified and directed.

S&F in repair glass shelf 500x60mm (with ABS Brackets), complete all as specified and directed.

S&F in repair Soap Dish, complete all as specified and directed.

S&F in repair wall mixture 3-in-1, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in repairs CP brass shower rose with swival joints complete fancy type for 15mm bore pipe, fixed as in repairs, complete all as specified and directed.

S&F in repair 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977, complete all as specified and directed.

S&F in repairs 15 mm bore, Stop cock/ Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair wash hand basin vitreous china size 550x400mm white flat back as approved by GE ,waste,chain plug,pvc connection, pvc waste pipe comp all as specified fixed in repair

S&F in repair Waste pipe 32mm for WHB with coupling, complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc., complete as specified and directed.

S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for hot/Cold water, complete all as specified and as directed.

S&F in repair CP Towel Ring, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap, complete all as specified and directed.

S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc., complete all as specified and directed.

S&F in repairs PVC flushing cisterns 10 liters capacity including flushing pipe and connections complete, complete all as specified and directed.

S&F in repair PVC water closet seat cover, black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for EWC fixed, complete all as specified and directed.

S&F in repair Toilet paper holder, complete all as specified and directed.

S&F in repairs Jet spray (Butterfly) with 1Mtr tube , complete all as specified and directed.

S&F Health faucet fixing in pipe etc., complete all as specified and directed.

S&F in repair PVC connection of PTMT nuts 15x600mm long, complete all as specified and directed.

S&F in repair PVC connection of PTMT nuts 15x450mm long, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair grating doom 100 mm dia with waste hole of PTMT.(Minimum weight 25 gms), complete all as specified and directed.

S&F PVC(SWR) single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe incl taking down old u/s pipes and any type of fittings etc., complete all as specified and directed.

S&F PVC (SWR) single socketed in any length with rubber ring joint fixed with wall of 75mm pipes incl taking down old u/s pipes and any type of fittings etc., complete all as specified and directed.

S&F PVC SWR branch piece single equal or unequal 110mm, complete all as specified and directed.

S&F PVC SWR branch piece single equal or unequal 75mm, complete all as specified and directed.

S&F PVC(SWR) bends any radius 110mm, complete all as specified and directed.

S&F PVC(SWR) bends any radius 75mm, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 litres, including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia, including taking out old UNSV storage water tank, complete all as specified anddirected.

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 500 litres, including fitting ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia, including taking out old UNSV storage water tank, complete all as specified and as directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia, complete all as specified and directed.

S&F ball in repair valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia, complete all as specified and directed.

Notes :- An amount of Rs.1,56,370.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.