Installation of Mechanical Pump Stations at Super Specialty Hospital Srinagar (As per Annexure E)

Supply, installation, testing and commissioning of Horizontal mono block pumping unit as per IS 1520 with following specifications:- Pump:- Discharge:- 7000GPH (UK) Head:- 35 mtr. 1.Type :- Horizontal mono-block Material of construction 1.Impeller:- Stainless Steel/CF8M/Bronze 2.Shaft:- Stainless Steel 3.Pump casing:- Cast Iron The pump shall confirm to IS-1520 code MOTOR :- A) Type :- Horizontal Induction Type B) Rating:- Suitable for above parameters. C) No of phases: 3 phase 415 V+10%,50 Hz, AC supply D) Winding:- Copper wound E) Type of enclosure:- SPDP/TEFC/as per OEM F) Speed = 2900 rpm G) Method of cooling:- Air cooled with fan mounted H) Method of starting:- As per OEM I) Class of insulation = Suitable for above parameters Make:- Kirloskar /KSB /Mather Platt/ The pump-motor should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. Job includes testing and commissioning of pumping unit. The job includes providing and fitting of reducers/ enlargers /flanges/ nipples of required size at suction and delivery of pump as per constructional features of the pump and as per site requirement. Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory.

Supply, installation, testing and commissioning of Open well submersible pumping unit with following specifications:- Pump:- Discharge:- 5000GPH (UK) Head:- 15 mtr. Speed:- 2900 rpm 1.Type :- Open well submersible (Horizontal type) Material of construction 1.Impeller:- Stainless Steel/Bronze/Cast Iron 2.Pump casing:- Cast Iron 3. Shaft : Stainless Steel MOTOR :- Type: 3-phase induction motor Rating:- Suitable for above parameters. Winding:-Copper wound Speed = 2900 rpm No of phases: 3 phase 415 V+10%,50 Hz, AC supply Method of starting:- As per OEM Class of insulation = F/Suitable for above parameters Make:- Kirloskar /KSB/Mather Platt Open well submersible pump motor should be oil filled, oil lubricated having capacity for above pumping parameters and working on 3 phases, AC supply, 50 HZ. The motor should be sealed properly to avoid mixing of well/ casing/ sump water with motor filled oil. The job includes providing and fitting of reducers/enlargers/flanges/ nipples of required size at suction and delivery of pump as per constructional features of the pump and as per site requirement. The job includes proper testing and commissioning of pumping unit on full load at site. Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory.

Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 along with thimbling as per requirement. Size: 6 sq.mm

Providing and fitting of 50 mm G.I Rising Main at site. The Pipe shall be hot dip Galvanized, class "C "confirming to IS 1239. The job includes providing and fitting of 90°-120° GI Bends bends/ elbows to be fitted to pipe by way of welding . The welding shall be carried out from inside and outside of the pipe using standard electrode of reputed make. All tools tackles required for job shall be arranged by the frim. The main technical specifications of the pipe are given here under: ND= 50 mm Class: C (Heavy) Make: Prakash Surya /Jindal/TATA

Supply, installation testing and commissioning of ductile iron double flanged, non-rising` spindle resilient seated sluice valve (PN16) as per IS 14846 for regulating the water supply at WSS MC2. The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber (Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical position. The valve shall be supplied along with hand wheel. Cost on account of Nuts, bolts, gaskets, and Flanges etc required for the job is included in the scope of work. The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with GI Pipe line at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job. Size: DN 50 mm Rating: PN16 Make: Talis/Sigma Flow/VAG The Test Certificate of Sluice valve duly stamped by manufacturer shall be provided at the time of supply of material