Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC SARSAVAH RAJA POST JAYANT DISTT SINGRAULI MP 486890 | JAYANT | SINGRAULI | MP | 486890 | ₹8.6 L Quoted ₹7.3 L | L1 | Accepted-AOC ACCEPTED AS L1 BASIS |
| 2 | Rejected-Technical SHUKIA MORE MORWA DISTT SINGRAULI MP | MORWA | SINGRAULI | MP | - | - | Rejected-Technical Technocommercially disqualified |
| 3 | Rejected-Technical NEAR RADHA KRISHNA MANDIR VIKASH BHAWAN JAYANT SINGRAULI MP PIN 486890 | JAYANT | SINGRAULI | MADHYA PRADESH | 486890 | - | - | Rejected-Technical Technocommercially disquilified |
| Sl No | Description | Qty | Unit | VISHAL ENGINEERING WORKS L2 | Kohli Engineering Company L3 | SUNSHINE ENGINEERING L1 |
|---|---|---|---|---|---|---|
| 1.00Scope of Work: (A) Repairing of Cracks at various places in Boom Assy. of 24/96 Balram Dragline having scope of work as follows: 1.Fabrication of suitable platform , 2. Cleaning of cracks by removing dust , grease & paint , etc. , 3. 'V' groove making by grinding , etc. , 4. Welding of joint by suitable electrode , 5. Perform D.P.test after root layer and every 2-3 layers , 6. Grinding/surfacing of crack , 7. Performing NDT , 8. Providing re-inforcement bars/plates if required. (B) Partial Repairing/Rebuilding of worn-out Grooves of Hoist and Drag Drums of 24/96 Balram Dragline having scope of Work as follows: 1. Grinding of uneven surface , 2. Welding of worn out grooves , 3. Grinding of welded surface to maintain the required slope and profile of groove. (C) Repairing of Dust Shield Plate Below Fairlead Pulley of 24/96 Balram Dragline. Maximum likely manpower for all the above jobs required per shift : 9 nos ( Skilled -04 , Semi -skilled -05) | ||||||
| 2.00Repairing of Cracks at various places in Boom Assy. of 24/96 Balram Dragline Note: Jointing electrode 16 kg per crack for Crack repairing of A-frame ,Jointing electrode 12 kg for repairing of cracks in Mast , Jointing electrode 18 kg per crack for repairing of cracks in RHS lower boom chord , Gas DA & Oxygen , MS Plate & pipe as per requirement will be provided by NCL | ||||||
| 2.01 | Cost/charges for Fabrication of platforms for Crack repairing of A-frame including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower) (Total 2 nos. cracks) | 2 | job | 26,500 ₹53,000 | 27,000 ₹54,000 | 26,000 ₹52,000 Lowest |
| 2.02 | Cost/charges for Crack welding of A-frame including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower) (Total 2 nos. cracks) | 2 | job | 30,200 ₹60,400 | 31,000 ₹62,000 | 30,000 ₹60,000 Lowest |
| 2.03 | Cost/charges for D.P.Test 3 times (after root , after 3 layer & after finale welding ) for Crack repairing of A-frame (Total 2 nos. cracks) | 2 | job | 1,500 ₹3,000 Lowest | 1,800 ₹3,600 | 1,500 ₹3,000 Lowest |
| 2.04 | Cost/charges for Ultrasonic testing for Crack repairing of A-frame (Total 2 nos. cracks) | 2 | job | 1,000 ₹2,000 Lowest | 1,200 ₹2,400 | 1,000 ₹2,000 Lowest |
| 2.05 | Cost/charges for Hiring of 2 nos. Welding machines with all accessories for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks) | 2 | job | 1,000 ₹2,000 Lowest | 1,000 ₹2,000 Lowest | 1,000 ₹2,000 Lowest |
| 2.06 | Cost/charges for Hiring of Gas cutting sets with all accessories for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks) | 2 | job | 700 ₹1,400 | 700 ₹1,400 | 500 ₹1,000 Lowest |
| 2.07 | Cost/charges for Hiring of 2 nos. Grinding machines with all accessories for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks) | 2 | job | 700 ₹1,400 | 700 ₹1,400 | 600 ₹1,200 Lowest |
| 2.08 | Cost/charges for Electrode L&T NH660 4MM for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks) (16kg per crack)) | 32 | Kg. | 1,300 ₹41,600 | 1,350 ₹43,200 | 1,282 ₹41,024 Lowest |
Tender Value
₹8.7 L
EMD Value
₹10,900
Closing Date
28 Jul 2025, 11:00 amClosed
GENERAL MANAGER (EXCAVATION)
OFFICE OF GM(EXCV) NIGAHI PROJECT , PO-NIGAHI , DISTRICT-SINGRAULI ,M.P.
Repairing of Cracks at various places in Boom Assy. of 24/96 Balram Dragline ,Partial Repairing Rebuilding of worn out Grooves of Hoist and Drag Drums of 24/96 Balram DraglineAndRepairing of Dust Shield Plate Below Fairlead Pulley of 24/96 Balram Dra
2025_NCL_338822_1
NGH/EXCV/TENDERS/25-26/036
Open Tender
Excavation Department Work
Item Rate
20 days
NIGAHI PROJECT
AS PER NIT
4 documents required · 4 mandatory
₹10,900
20 Sept 2026
8 Jul 2025
29 Jul 2025
8 Jul 2025
28 Jul 2025
9 Jul 2025
8 Jul 2025 - 16 Jul 2025
Amount
Scope of Work: (A) Repairing of Cracks at various places in Boom Assy. of 24/96 Balram Dragline having scope of work as follows: 1.Fabrication of suitable platform , 2. Cleaning of cracks by removing dust , grease & paint , etc. , 3. 'V' groove making by grinding , etc. , 4. Welding of joint by suitable electrode , 5. Perform D.P.test after root layer and every 2-3 layers , 6. Grinding/surfacing of crack , 7. Performing NDT , 8. Providing re-inforcement bars/plates if required. (B) Partial Repairing/Rebuilding of worn-out Grooves of Hoist and Drag Drums of 24/96 Balram Dragline having scope of Work as follows: 1. Grinding of uneven surface , 2. Welding of worn out grooves , 3. Grinding of welded surface to maintain the required slope and profile of groove. (C) Repairing of Dust Shield Plate Below Fairlead Pulley of 24/96 Balram Dragline. Maximum likely manpower for all the above jobs required per shift : 9 nos ( Skilled -04 , Semi -skilled -05)
Repairing of Cracks at various places in Boom Assy. of 24/96 Balram Dragline Note: Jointing electrode 16 kg per crack for Crack repairing of A-frame ,Jointing electrode 12 kg for repairing of cracks in Mast , Jointing electrode 18 kg per crack for repairing of cracks in RHS lower boom chord , Gas DA & Oxygen , MS Plate & pipe as per requirement will be provided by NCL
Cost/charges for Fabrication of platforms for Crack repairing of A-frame including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower) (Total 2 nos. cracks)
Cost/charges for Crack welding of A-frame including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower) (Total 2 nos. cracks)
Cost/charges for D.P.Test 3 times (after root , after 3 layer & after finale welding ) for Crack repairing of A-frame (Total 2 nos. cracks)
Cost/charges for Ultrasonic testing for Crack repairing of A-frame (Total 2 nos. cracks)
Cost/charges for Hiring of 2 nos. Welding machines with all accessories for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks)
Cost/charges for Hiring of Gas cutting sets with all accessories for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks)
Cost/charges for Hiring of 2 nos. Grinding machines with all accessories for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks)
Cost/charges for Electrode L&T NH660 4MM for all the above jobs for Crack repairing of A-frame (Total 2 nos. cracks) (16kg per crack))
Cost/charges for Fabrication of platforms for repairing of cracks in Mast including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower)
Cost/charges for repairing of cracks in Mast including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower)
Cost/charges for D.P.Test 3 times (after root , after 3 layer & after finale welding ) for repairing of cracks in Mast
Cost/charges for Ultrasonic testing for repairing of cracks in Mast
Cost/charges for Hiring of 2 nos. Welding machines with all accessories for all the above jobs for repairing of cracks in Mast
Cost/charges for Hiring of Gas cutting sets with all accessories for all the above jobs for repairing of cracks in Mast
Cost/charges for Hiring of 2 nos. Grinding machines with all accessories for all the above jobs for repairing of cracks in Mast
Cost/charges for Electrode L&T NH660 4MM for all the above jobs for repairing of cracks in Mast
Cost/charges for Fabrication of platforms for repairing of cracks in RHS lower boom chord including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower)
Cost/charges for repairing of cracks in RHS lower boom chord including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower)
Cost/charges for D.P.Test 3 times (after root , after 3 layer & after finale welding ) for repairing of cracks in RHS lower boom chord
Cost/charges for Ultrasonic testing for repairing of cracks in RHS lower boom chord
Cost/charges for Hiring of 2 nos. Welding machines with all accessories for all the above jobs for repairing of cracks in RHS lower boom chord
Cost/charges for Hiring of Gas cutting sets with all accessories for all the above jobs for repairing of cracks in RHS lower boom chord
Cost/charges for Hiring of 2 nos. Grinding machines with all accessories for all the above jobs for repairing of cracks in RHS lower boom chord
Cost/charges for Electrode L&T NH660 4MM for all the above jobs for repairing of cracks in RHS lower boom chord
Cost/charges for repairing of cracks in Base of Intermediate Boom pulley including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower) (Total 04 nos cracks)
Cost/charges for D.P.Test 3 times (after root , after 3 layer & after finale welding ) for repairing of cracks in Base of Intermediate Boom pulley (Total 04 nos cracks)
Cost/charges for Ultrasonic testing for repairing of cracks in Base of Intermediate Boom pulley (Total 04 nos cracks)
Cost/charges for Hiring of 2 nos. Welding machines with all accessories for all the above jobs for repairing of cracks in Base of Intermediate Boom pulley (Total 04 nos cracks)
Cost/charges for Hiring of Gas cutting sets with all accessories for all the above jobs for repairing of cracks in Base of Intermediate Boom pulley (Total 04 nos cracks)
Cost/charges for Hiring of 2 nos. Grinding machines with all accessories for all the above jobs for repairing of cracks in Base of Intermediate Boom pulley (Total 04 nos cracks)
Cost/charges for Electrode L&T NH660 4MM for all the above jobs for repairing of cracks in Base of Intermediate Boom pulley (Total 04 nos cracks) (16 kg per crack)
Partial Repairing/Rebuilding of worn-out Grooves of Hoist and Drag Drums of 24/96 Balram Dragline Note: 7018 Electrode 10 kg per groove (14 nos. Grooves in Drag Drum + 16 nos. Gooves in Hoist Drum) will be provided by NCL
Cost/charges for Repairing/Rebuilding of worn-out Grooves including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower) (14 nos. Grooves in Drag Drum + 16 nos. Gooves in Hoist Drum)
Cost/charges for Hiring of Welding machines with all accessories for all the above jobs for Repairing/Rebuilding of worn-out Grooves (14 nos. Grooves in Drag Drum + 16 nos. Gooves in Hoist Drum)
Cost/charges for Hiring of Grinding machines with all accessories for all the above jobs for Repairing/Rebuilding of worn-out Grooves (14 nos. Grooves in Drag Drum + 16 nos. Gooves in Hoist Drum)
Repairing of Dust Shield Plate Below Fairlead Pulley of 24/96 Balram Dragline. Note: Welding electrode-40kg ,Gauging electrod- 12 kg , Gas DA (1) & Oxygen (3) , MS Plate 3.15 mm - 90kg & MS Angle 50 x 50 x 5mm - 100kg will be provided by NCL
Cost/charges for Repairing of Dust Shield Plate Below Fairlead Pulley including labour charges ,contactor profit, etc. (labour consisting of Skilled fitter, skilled welder and semi skilled Helper manpower)
Cost/charges for Hiring of 2 nos. Welding machines with all accessories for all the above jobs for Repairing of Dust Shield Plate Below Fairlead Pulley
Cost/charges for Hiring of 2 nos. Grinding machines with all accessories for all the above jobs for Repairing of Dust Shield Plate Below Fairlead Pulley
Total impact of GST for the purpose of CTC
VISHAL ENGINEERING WORKS (BID ID -1167824)
Kohli Engineering Company (BID ID -1171105)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .