Construction of infrastructure for Street lights along the main road falling within the jurisdiction of Sub Division Hawal, K.K.Moulla of Electric Division IV Khanyar

Supply, installation, testing and commissioning of:

9 Mtr. Long Pole( ST-540 SP33)

11 Mtr. Long Pole( ST-540 SP56)

MS Channel iron 100x50x50x6mm 9' long (14No.)

MS Channel iron 75x40x40x6 mm 8' long (6No.)

MS Channel iron 75x40x40x6 mm 6' long (2No.)

MS Angle Iron braces 50x50 x6mm 5' long (04 No.)

MS Angle Iron braces 50x50 x6mm 6' long (02 No.)

MS Nuts & Bolts /washers (Galvanized of sorts)

GI Strip for earthing.

25 KV Transformer 11Kv/433V 50 Hz 3Ø with bi Matallic terminal connectors Energy level 2 copper wound

63 KV Transformer 11Kv/433V 50 Hz 3Ø with bi Matallic terminal connectors Energy level 2 copper wound

100 KV ATransformer 33Kv/433V 50 Hz 3Ø with bi Matallic terminal connectors Energy level 2 copper wound

50 mm² PVC 3.5 Core Cable

95 mm² PVC 3.5 Core Cable

120 mm² PVC 3.5 Core Cable

Solder less Clamps

11 KV Gang Operating Switch

33 KV Double break Isolator along with allied accossries

11 KV Disc insulator with complete fittings

33KV Disc insulator with complete fittings

Drop-out set (Horn-gap type) 11KV

Drop-out set (Horn-gap type)33KV

11KV Lighting Arrester Set ( Station type) 11KV

33KV Lighting Arrester Set ( Station type) 33 KV

11 kV Pin Insulators (polymer/porcelain) with Pins( 5 KN)

33kV Pin Insulators (polymer/porcelain) with Pins( 5 KN)

Danger Plates with Clamps

Earthing for Sub-Station

Earthing insulating boots with clamps

MS Angle Iron for Transformer Belt 50x50x6mm 10' long

Earthing for Poles (Spiral Type)

Anti-Climbing Device with Clamps

Cement Bottoming of poles

Painting of poles

Supply, installation, testing and commissioning of:

Supply, installation ,testing and commissioning of 25 KVA 3 phase servo control stabliser oil cooled with input voltage of 160-450 volts, 50 HZ and a constant out put voltage of 400 volt including the canopy to protect during raining and snowing of suitable size. The stabliser shall be provided with high and low cut off voltage system,overload/under load & single phase protections and also shall resist the input and out put +5% tolerance. The item includes its thimbling as required at taping points for in and out. The Stabliser shall be AE/Electric field/IECO make with 2 year warranty period.

Construction of 6' length x4' breadth and heihght upto 6' in chielsled stone bed for installtion of stablizer/pannel in the ratio of 1:4 and includes cement concenrete underground 1 feet after spreading 4" thick soling layes 1:2:4 ratio including shuttering of required size with plustering in1:4 mix complete bed to accomodate stabliser and control panel the item inclues cement pointing and excavation of under ground trench , all carriage / transportation upto the site with the removal of surplus excavated earth from the site to dumping

Providing of cover shed and to foundation for servo stablizer and LT panel of required size job includes provide fencing around equipments / sub station.

Supply, installation ,testing and commissioning of 63 KVA 3 phase servo control stabliser oil cooled with input voltage of 160-450 volts, 50 HZ and a constant out put voltage of 400 volt including the canopy to protect during raining and snowing of suitable size. The stabliser shall be provided with high and low cut off voltage system,overload/under load & single phase protections and also shall resist the input and out put +5% tolerance. The item includes its thimbling as required at taping points for in and out. The Stabliser shall be AE/Electric field/IECO make with 2 year warranty period.

Sign board of appropriate size painted with details of the work like name of the creation, Head of the account , Date of start and date of commissioning

Outdoor type canopy type double door dust free LT feeder panel 3'x2'.5"x4' fabricated out of sheet steel of adequate gauge for external use with fitted wit 100 Amp,4 pole MCCB main controlh including 4 strip cu busbars of same capacity with out put circuit carried through 4 no. 63Amp. 4 pole MCCBs for 4-outgoing circuits. The panel shall also be provided with Automatic timmer switch with connector / contractor controllers for operation of street Lights with a set of voltmeter, ampere meter, indicator and backup protection for panel of required capacity. The panel is to be supported on 4 no. angle iron legs to be grouted in cement concreate exluding the cost of RCC bed.

Supply, installation, testing and commissioning of:

9 Mtr. Long Pole( ST-540 SP33)

11 Mtr. Long Pole( ST-540 SP56)

MS Channel /Angle iron 100x50x50x6mm /75x40x6mm 50x50x6 fabricated and of all sorts with two coats of alimunium paint and one coat of red oxide

11 kV Pin Insulators (polymer/porcelain) with Pins( 5 KN)

50mm ACSR Conductor (Rabbit)

35sqmm ² AB Cable 3 core

35sqmm ² AB Cable 3 core cable kit

MS Nuts & Bolts /washers (Galvanized of sorts)

33 kV Pin Insulators (polymer/porcelain) with Pins( 5 KN)

Earthing for Poles (Spiral Type)

Anti climbing device

Painting of poles

Cement Bottoming of poles

Supply, installation, testing and commissioning of:

9.0 mtr Long GI (65 micron DFTsingle dip) octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 130 mm x 70mm & base plate of 220x220x16mm, Door Opening 500 x 220mm

G.I. foundation bolts600 x20 mm long (set of 4no's per pole)

Laying of RCC foundation for 9.0 mtr. Long Octogonal poles(600mmx600mmx1600mm) with 4'U/G including cost of Template .

Earthing of poles Including 8 No GI wire and 1.5 inch dia, 3 ft long G.I. pipe dully welded

one way top breacket (GI pipe 50 mm) of round design to be fitted on top of ST/octogonal pole for holding lighting fixture

Two way top breacket (GI pipe 50 mm) of round design to be fitted on top of ST/octogonal pole for holding lighting fixture

120 watt LED type lighting fixture complete of Philips/ Crompton/ Havells/ Goldwyn/Fiem/ Osram/Surya/Bajaj make( Light to be provided by the department and errection is quoted)

3x 1.5 sq.mm PVC insulated multistrand flexible copper wire for service connections

2-10 AMP MCB c Curve

HDPE pipe 50 mm O/D including trench excavation in hard soil (1ft x 2ft ) for laying of 25/16 sq mm Almunium armored cable . The job further inludes refilling back the same and removal of surplus excavted material to an appropriate place.

16 Sq.mm, 4 core PVC armoured cable to be laid under ground.

25 Sq.mm, 4.0 core PVC armoured cable to be laid under ground.

25/16 Sq.mm Alumunium cable thimbles/lugs at termination points including providing of insulation tape

Sign board of appropriate size painted with details of the work like name of the creation, Head of the account , Date of start and date of commissioning

Supply, installation, testing and commissioning of:

Dismentalling of 8/9/11mtr ST poles/ PCC/ Wooden and street light poles along with allied accossories. The Job includes loading at site .,Carriage to Divisiional stores and stacking at stores

Dismentalling of street Light fictures along with bracket and allied accossories. The Job includes loading at site .,Carriage to Divisiional stores and stacking at stores

MANNAAN ENTERPRISES

TZ Engineering Works