BLEED VALVE RELOCATION JOB OF FRAME-V GAS TURBINE AT HALDIA REFINERY.

Amount

"GT BLEED VALVES RELOCATION JOB . "refer SOR item no. 00010 of RFQ line item no. 00010" excluding GST. The detailed scope in service work is given below. SCOPE OF WORK:- 1. Vendor has to remove old bleed valves, associated components, piping, bellows, switches, cables and everything connected or related to bleed valves. 2. Removed equipment, spares, fittings, piping, cables, switches etc. are to be handed over to IOCL. 3. Make necessary arrangements for relocation of bleed valves. 4. Install new bleed valves including all the associated components and accessories outside the turbine compartment. VENDOR's SCOPE:- A) M/s. BGGTS has to engage engineers/ technical advisors/ required manpower's, EOT crane operator and supervisor for jobs as per instruction of the Engineer-In-Charge. B) If any site visit is required to understand the existing configuration so same to be carried out by M/s BGGTS without any extra charges. C) All required tools & tackles including tapping/ Drilling/ Reaming tools for carrying out the job shall be in the scope of the M/S. BGGTS. Non-sparking tools will have to be used as per the site requirement. D) Personal Protective Equipment for labourers like safety belt, full body harness, safety net, fall arrester, face shield, safety mask, safety shoe, safety goggles, hand gloves, Inherent Fire Retardant(IFR) suit etc. shall be in the scope of the M/S. BGGTS. The same will be continuously monitored by M/s. BGGTS's safety supervisor. E) M/s. BGGTS has to bring materials from owner's storage point and Store & ware house. After completion work, M/s. BGGTS must return the excess material to owner's store/ storage point or Store and Warehouse. F) M/s. BGGTS must clean the job site after completion of any job. Metallic scraps generated during repair/maintenance work are to be returned to Store & Warehouse. Non-metallic scraps are to be disposed to the designated location as per instruction of the EIC. G) M/s. BGGTS must keep one experienced job supervisor available at the job site so as to coordinate all technical requirements of job such as job quality, safety aspects etc. and also appraise the job planning in advance along with material requirement. Also he will maintain a register recording the jobs done every day. Those are to be certified by concerned engineers for bill payment. H) TO & FRO transportation cost form vendor's place to IOCL Haldia Refinery, local conveyance & transportation charges and accommodation/ lodging & boarding charges for M/s. BGGTS TEAM shall be in the scope of M/s. BGGTS. I) Vendor has to ensure successful commissioning of bleed valves. The job shall be understood to be completed after the unit is run to Full speed No Load condition and available plant load. After successful commissioning, Vendor shall provide guarantee of one CI (Combustion Inspection) cycle. If any repair/ replacement comes within one CI cycle, vendor shall do the necessary repair/ replacement free of cost. Vendor shall provide 04 nos. hard copies & 01 no. soft copy in pen drive of updated maintenance & operation manual including P&ID, part list with exploded view of bleed valve relocation job. J) Statutory Requirement: 1. Party shall have Insurance coverage for all the personnel employed for the job. 2. Party shall deposit PF for the personnel employed for the job as per PF Rules etc. 3. Party shall abide by all other statutory requirement like contract labour act, factory act etc & fulfil requirement laid therein. 4. Strict adherence to necessary guidelines for issue of gate passes as issued by Security department from time to time. K) Safety Requirement: 1. Party shall strictly follow the safety norms prevalent in Haldia Refinery. 2. Party shall use personal protective equipment including safety shoes and safety helmets for their employees engaged for the job. 3. Party shall use full body harness (full body safety belt & safety net in all job at a height of 2.0 mtr & more), if required. 4.PPE's for all the personnel involved in the subject job. 5. All Personnel of Party shall attend Fire & safety training prior to start of work. L) IOCL scope: a) Designated representative(s) to coordinate activities with M/s BGGTS. b) Machine Shop facilities will be provided by IOCL (Limited to the availability of existing machine tools) c) Bleed valves with operating solenoid 20CB and limit switches(33CB) shall be arranged by IOCL. M) All the other terms & conditions shall be as per GCC & SCC."