GE U N 28 2021 22 REPAIRS TO GARRAGES CEILING FLOORING DADO DOORS KITCHEN CABINETS ETC IN PB ENCLAVE AND CHINAR COMPLEX UNDER AGE B R I OF GE NORTH

Amount

M&L for demolition of unreinforced cement concrete of any description and in any position, complete all as specified and as directed.

M&L for taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and directed by the Engr-in-charge.

M&L for dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and directed.

M&L for dismantling of wall and ceiling board (fibre/pulp, insulation, etc) or insulation boards /slabs/ blankets , any thickness, including cover fillets all as specified and as directed by engineer in charge.

M&L for taking down chowkats or frames with shutters (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

M&L for taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

M&L for dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for cutting/removal the roots of foliage growth from the brick walls / stone wall made in cm exc half and not exc one brick thick and making good the disturbed surfaces with the cement sand mortar 1:3 or PCC 1:2:4 complete all as specified and directed.

M&L for rendering 5 mm thick plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in two layers (first layer 10mm thick and second layer 5mm thick) on fair faces of brick work, Cement plaster as in CM 1:4 finishing even & fair w/o using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work in cm 1:6 finished even and smooth w/o using extra cement all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, Cement plaster as in CM 1:4 finishing even & smooth w/o using extra cement mixed with WPT. (Note :- WPC shall be measured & paid saperately)

M&L for dismantling loose/disintegrated portion of RCC chajjas, bends shelves, bottom & sides of chajjas, roof projections & facia, beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape and provision of necessary support form work and including 10mm thick plastering in CM 1:4 finished fair and even completed all as specifed.

M&L for 50mm thick, PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in floors finished even & smooth with out using extra cement, complete all as specified and directed.

M & L for 4mm thick and 40mm wide glass dividing strips as in floors, complete all as specified and as directed.

M&L for 50mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A complete all as specified and directed.

S&F false ceiling with Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 595mmx595mm and any one of the design (occeanic , lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @120 gms, both sides inclusive) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0..30mm thick sheet and cross T of size 15x32mm made of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers grils, light suspended from ceiling using GI soffit cleats fixed to existing rafters, purlin etc with dash fastners GI adjustable rods of 3mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centre black pre-painted with polyester paint and having a load bearing capacity of 12 kg/sqm and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engr-in-charge.

S & F for 2nd class hard wood as in transomes or mullions, straight or solid frame of any description, clean sawn frame single/ double rebated, rounded or chamfered including as fixed in repairs to replaced old and decayed timber incl piecing, scarfing etc of old & new timber if required & remove defective portion, complete all as specified and directed. Note :- The work shall be carried out upto maximum height 12.00 Mtr.

M & L for 16mm thick perforated particle board/ tiles for insula-tion in walls and accoustic purposes, 60x60/ 30x30cm or any other suitable cm in size, fixed with screws to timber framework or with staples on snap grid, as fixed in patches repair, complete all as specified and as directed by Engr-in-Charge.

M&L for pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,bottom flat iron support/MS Square bar inlcuidng fixing of hold fast for filling of cement concrete (1:3:6) in back recess profile section etc., complete as specified and directed.

M&L for pressed steel frames 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate bottom flat iron support/MS Square bar inlcuidng fixing of hold fast for filling of cement concrete (1:3:6) in back recess profile section etc., complete as specified and directed.

M&L for 35mm thick factory made flush shutters, solid core constructions, with block board, core and plywood face panel, commercial plywood on both sides, complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.24 (a), complete all as specified and as directed.

M&L for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

M&L for factory made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and as dircted.

S&F 100 mm long stainless steel butt hinges, medium weight, and fixed, complete all as specified and as directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as dircted.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and as dircted.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as dircted.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as dircted.

S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screwsas in cup board, shelves, kitchen cabinet, etc. including provn of 6mm thick teakwood lipping allround the shutter, complete all as specified and directed.

S&F 100 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and as dircted.

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and directed.

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent as sample approved by Accepting Officer, complete all as specified and directed.

S&F in repair Stainless steel luddle-craddle hanging stand for cutlery all as specified and directed by Engineer-in -charge for modular kitchen, complete all as specified and directed. Make : Usha shriram entp pvt ltd or equivalent as sample approved by Accepting Officer

S&F in repair Chromium plated mild steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen. Complete all as directed by Engr-in-charge. Make : AVIS Gold or equivalent as sample approved by Accepting Officer

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed.

Coloured (GVT) vetrified supper glossy finish tiles minimum 10mm thick (square) polished , light shade, area of each tiles exc 0.42 sqm but n.exc 1.00Sq.m (min. size 800mm x 800mm or 600 x 1200mm as approved by GE, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick screed bed in CM (1:4) complete all as specified and as directed.

All as per Serial Item No 39 above but as in skirting/ dado, etc of minimum heigth 100mm, etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Non skid ceramic coloured tiles 8 to 10 mm thick (sqare/ rectanglear) area of each tile exc 0.18sqm but n exc 0.38 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar (1:4) complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as dircted.

M&L for closing bolt holes etc. in old corrugated steel sheets or Galvalume sheeting by sealing with one self tapping screw suitable for Galvalume sheet and one curved GI & PVC washer on either side, all set in stiff white lead, Screw n exc 50mm in length complete all as specified and as dircted

M & L for applying two coats of white wash on new surfaces of ceiling over prepared surfaces of new plastered surfaces complete all as specified and as directed

M & L for applying two coats of white wash on new surfaces of Walls over prepared surfaces of new plastered surfaces complete all as specified and as directed

M&L for two coat of cement base paint over a coat of priming paint over prepared surfaces of newly plastered wall complete all as speficied and as directed.

M&L for preparation of new plastered surfaces by using necessary filling compound of white putty 2 to 3 mm exterior grade to obtain smooth/even finish using sand paper and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling by applying 1 to 1.2mm thick white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

M&L for taking down and refixing hold fast of steel doors of garrages and refixing steel door shutter after repair work complete with cement concrete 1:2:4 including all necessary form work, welding, etc, complete all as specified and as directed.

JOGINDER SINGH

anil construction co.

M/S GURU DEV BUILDERS

KALSOTRA CONSTRUCTION CO

M/S IMTESH BHAT