Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit, Anushaktinagar, Mumbai

NAME OF WORK Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit of Anushaktinagar, Mumbai.

NIT NO DCSEM/CQD/QSB/NIT/70 dt. 09.01.2026

1 Tenderers are advised to visit the site of work with prior permission of Engineer-in-charge/authorised representative, to acquaint themselves with the nature and location of work before quoting tender. Tenderers shall visit the site of work, at their own cost. The request email for site visit may be sent well in advance (preferably three working days before) for preparation of visitor pass, fixing suitable & mutually agreed date & time for site visit. The email ID for site visit is mentioned in tender documents.

2 The work is to be carried out in vacant flats of occupied buildings, hence the work shall be carried out with least disturbance to the residents.

3 All safety & security regulations shall be followed strictly as per specifications & conditions of contract.

4 The Job card for each flat shall be issued on weekly basis, Work shall be completed in all respects in maximum of 30 Days. If agency fails to complete the work in stipulated time frame, a penal recovery of Rs. 1500 per flat per day shall be levied. Decision of Engineer-In-Charge shall be final and binding to agency.

5 The agency shall have to commence the work and execute an average of Seven flats per week, subject to availability of flats.

6 The contractor shall provide sleeveless Jackets to the workers in required pattern, colour showing name of contractor with address and telephone number as approved by the Engineer in charge. All the workers must wear the same while on duty.

7 Contractor shall take contractor’s all risk insurance policy in respect of entire scope of work for entire period of contract and submit copy of the same before commencement of the work. "If there is a gap in CAR insurance policy period a panalty of 1.5 times of the premium amount of original policy value shall be recovered , proportionately for the gap period."

8 Security measures to be followed by the contractor : i) Contractor should provide uniform to all regular labour and fluorescent visi wears to all casual labour deputed at site for proper identification. ii) The contractor should issue I-Card to all workers deployed on regular basis and list of such workers vetted by site Engineer should be submitted to DCSEM Security at Main Gate. iii) The supervisor of contractor having photo pass shall bring daily wages workers/ casual workers inside premises for work subject to following conditions. (i) He should prepare list of such workers in duplicate. The original copy would be handed over to DCSEM security at Main Gate and obtain endorsement on duplicate copy and the duplicate copy would remain with the contractor. (ii) Departmental staff deputed to supervise the work has to verify the reporting of such workers at site. iv) You shall follow all safety rules & security procedure that are in vogue and applicable during execution of work. You are requested to verify the character and antecedents of the labourers employed by you, through local address proof issued by competent authorities such as ration card, driving license, electricity bills, telephone bill, gas connection document etc. The nationality of contract labourers also needs due verification. v) You are requested to obtain immediately Police Verification Reports of your regular staff deployed at site(s) in respect of maintenance contract works and submit the same along with necessary application to allow them to enter in premises to carry out the assigned work.

9 i) No debris shall be left over around the building during the renovation works. An area for 'Debris bins' will be identified close to his site office or inside Anushaktinagar colony at the location identified by EIC on the request of contractor for collection of debris generated on day to day basis. The Debris from debris bin shall be cleared every month. The contractor must maintain adequate number of wheel borrows all the time for shifting the debris to Debris bin. If the debris lies around the building for more than 2 days, penalty @ Rs. 500/- per day per flat shall be levied w.e.f. 3rd day onwards. ii) The debris generated shall be disposed by mechanical transport to the nearest dumping pit inside Anushaktinagar colony as directed by EIC with all leads, loading, unloading etc. complete. No payment shall be released unless certificate from EIC showing clearance of debris is produced in each RA bill and Final bill.

10 Penal recovery shall be made at the rate of Rs. 1500/- per flat per day, if water taps / bib cocks, flushes etc. are left open. In case of any further material loss due to this negligence in other flats, same will have to be borne by contractor.

11 Wherever material are replaced with new one, quoted rate includes removing existing one and depositing the serviceable material at departmental store and disposing off debris inside Anushaktinagar colony at the location identified by EIC

12 The cement sand mortar use shall be factory manufactured pre mix/ready mix of 'Roofit Mix 'of M/ s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/sWalplast Products pvt.ltd/ 'Readiplast' of M/s UltratechCement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties,mechnical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit of Anushaktinagar, Mumbai.

Contract No: DCSEM/CQD/QSB/25-26/NIT/70 dt.09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit of Anushaktinagar, Mumbai.

Contract No: DCSEM/CQD/QSB/NIT/70 dt. 09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

PART I : CIVIL WORKS 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

101 Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site,simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscocity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

102 Providing & erecting double bamboo scaffolding using minimum 75 mm dia best quality bamboo tied with coir rope & the horizontal & vertical members of the bamboos provided as required at spacing of not more than 900 mm apart both vertically & horizontally including providing cross supports as struts to tie the scaffolding properly to the building for maintenance / repair works of external surfaces of buildings as &when required including providing necessary safety belts to workers, dismantling the scaffolding after repair work is completed including cost of transportation, labour, safety belts etc. complete all as directed by the Engineer-in-Charge. NOTE: The mode of measurement shall be in square metre for the overall portion of external exposed surface area of buildings covered by scaffolding and the said area shall be measured flat. No deductions shall be made for any openings in the surface and the jambs / reveals. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

104 Plain cement concrete using graded stone aggregate of 20mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. complete all as per specification & as directed by the Engineer-in-Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

105 Providing Indian patent stone flooring 50 mm thick at all floors & levels, in cement concrete 1:2:4 using graded stone aggregate of 10 mm max. size laid to proper level or slope in alternate bays in panels of required sizes, finished smooth including providing glass dividing strips of size 25 x 3 mm wherever required, curing, including removing carefully existing damaged/ worn out flooring and disposing off debris out side colony etc. complete all as per specifications & as directed by the Engineer-in-Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

106 Repairing of loose / shaky vitrified tile flooring/ green marble/granite stone frames at all floors and levels using polymer modified cement based tile adhesive manufactured by Roffe Construction – NSA (Non Skid Adhesive) or M/s Bal Endura Chemicals– Gold Star or other approved equivalent. The repairing process will consists of following. (1) Complete checking by tapping of affected flooring area using solid wooden stick. Identifying the affected tiles for repair work. (2) Drilling holes through tiles and widening of tile joints using cutter as per requirement. (3) Breaking of tiles and removing backing adhesive from original flooring, cleaning etc. (If Required). Checking the original flooring by tapping using solid wooden stick and repairing of original flooring by breaking the original mosaic / cement tile flooring and filling with 1:3 cement sand mortar, curing etc. complete. (4) Grouting the tile flooring using tile adhesive slurry through drilled holes, widened joints, opening made by tile breaking using trowel etc. and by tapping of floor tiles etc. (5) Sealing of drilled holes, widened joints using white cement cleaning of flooring, removal of debris and disposal of debris inside colony. (6). Removing and refixing of Aluminium window/door shutter/MS grill for repairing work. After the repairing works (7) Complete checking by tapping of repaired flooring area using solid wooden stick after 7 days of repairing work in presence of departmental representative. The repaired work shall not make any hollow sound, loose/shaky motion of tiles. The entire repairing work shall be carried out as per direction and instructions of engineer-in-charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

107 Providing and laying at all floors and levels Vitrified tiles of first quality Marbonite of M/S H&R JHONSON (INDIA) Ltd or other equivalent approved make of approved colour, shade, pattern and of thickness as per manufacture's specifications, laid directly over tile, using polymer cum cement based adhesive (Type -II as per IS) manufactured by M/S Roffe construction or M/s Bal Endura chemicals or other approved equivalent in respect of flooring and fixed over 12 mm thick backing using ready mix cement mortar 1:3 in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing etc. complete all as per specification, relevent IS code & as directed by the EIC. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

107.01 a) In flooring with tiles of approx. size 600 mm x 600 mm similar to Salt & Pepper (White)/ Perlato/Athelon of M/s H& R Johnson (I) ltd. laid directly over existing tile using tile on tile polymer cum cement based adhesive. Sqm Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

108 Providing & laying at all floors & levels first quality matt finished/non slippery ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or equivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. including cost of all materials, including of cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc. and including removing existing flooring / dado and disposing of debris complete all as per specifications, relevant IS code & as directed by the Engineer-in-Charge. Note-: Agency may visit the flats for old & new series being used for Kitchen, Bath and toilets and quote rate accordingly. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

109 Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:4 (Using factory made Ready Mix Mortar only), 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc. and depositing the same at dept. store etc. complete all as per specifications, drawings & as directed by the EIC. Note:- 1) All finished natural stones except for floorings shall be applied with araldite or equivalent stone adhesive on back surface ,spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 2) Window jamb, cill & lintel bottom with granite / green marble shall be mitred / partly mitred joint as directed by Engineer-In-Charge. 3)Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc. shall not be measured. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

110 Providing & laying machine cut machine polished Cuddapah stones/granite stone/marble stone as mentioned followings for kitchen platform vertical support /shelves /window cill etc. and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc., as required including cutting of stone slabs, wastage, making cut outs wherever required etc. all as per drg, specifications and as directed by EIC. Note : 1)Verticals, shelves, platform shall be embedded minimum 25 mm in wall/flooring. 2)Exposed inside vertical finished face of window below platform shall be measured for payment in sqm. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

113 Reinforcement for reinforced cement concrete conforming to IS at all floors & levels including supplying, cutting, bending, fixing and tying in position with 16 mm dia. soft drawn annealed binding wire including cost of binding wire, labour etc. complete all as per specifications and as directed by the Engineer- in- Charge. Note: Binding wire required for the work will have to be supplied by the contractor & the same will not be measured for payment. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

114 Cement plastering using factory manufactured pre mix/ ready mix mortar in CM 1:4 of 'Roofit Mix' of M/s. Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s. Walplast Products pvt.ltd/ 'Readiplast' of M/s. Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth over brick walls or concrete surfaces at all floors and levels including membrane curing by applying one coat of factory made curing compound Resikure of M/s. Anuvi Chemicals, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. and removing existing damaged/ worn out plastering and disposing off debris in side colony etc. complete all as per specifications and as directed by Engineer- in- Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

114.01 a) 15 mm thick. Sqm Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

125 Demolishing brick /stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing of unserviceable materials etc. complete all as per specification & as directed by the Engineer-in-Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

128 Providing & fixing ordinary plain/ frosted/ Bajara sheet glass of approved make of following thickness in various sizes as required at site, fixing to windows / louvers, partitions, vision panels, doors etc. using first class oil puttyof approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading with necessary screws, nails etc. at all floors & locations including cutting the glass to required size, removing the existing broken/ damaged glass panes from windows/ doors/ partitions etc.along with its old oil putty, beading etc. and disposing off the un-serviceable material out side colony including wastage in cutting, transportation etc. complete all as directed by the Engineer-in-charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

129 Supplying & fixing in position 35 mm/ 40mm thick of solid core block board flush door shutters with commercial ply on both sides conforming to IS with external type teak wood lipping of section 35 x 20 mm/ 38 x 20 mm.. alround, fixing shutters in position to pressed steel door frames/ wooden frames at all floors by cutting/ planning if necessary, including supplying & fixing heavy duty MS oxidised hinges including cost of fixing the fittings, painting the shutters all over with two coats of synthetic enamel paint of approved make & colour over one coat of approved primer etc. including removing the old damaged shutter and transporting to Deptt. stores all as per specifications, & as directed by the Engineer-in-charge . 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

131 Providing and fixing Night latch Full set with 7 levers, consist of latch assembly, safty latch, Round lock, Retainer plate, Dead lock suitable for doors of 35-40 mm thick, with 3 keys in orginal, inside opening door with safety like brass lever locking mechanism screws required, similar to M/s. Godrej make ( Cat No. 8261 & 9104) or approved equivalent having same shape, size and dimensions including removing the existing old & damaged lock and submitting the same to the deptt. store etc. complete all as directed by the Engineer-in-charge 2 Construction of chamber for 100mm sluices valve item3 10 Nos

132 Providing & fixing Mortice lock with brass parts and body with 6 levers,of Godrej/ Everite make or other approved equivalent with stainless steel duplicate keys and pair of detachable, pressure diecast chromium plated handle with chromium plated brass screws for left hand/right hand and for single leaf shutter of 30mm to 50 mm thickness with brass socket plate. (Exact number for left, right and double shutter shall be ascertained based on site requirement.) etc. complete as per manufacturer specification and as directed by EIC 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

134 Supplying and fixing following type of miscellaneous fittings, fixtures and fastenings of approved quality Stainless steel fittings and fixtures of M/s Shalimar hardware or approved equivalent along with necessary CP brass screws,bolts, nuts, washers and other standard accessories as per approved sample etc. complete all as directed by the Engineer-in-charge 2 Construction of chamber for 100mm sluices valve item3 10 Nos

135 Supplying & fixing heavy duty superior quality matt finished anodised (anodic coating not less than Grade AC10 as per IS 1868) ISI marked aluminium fittings and fixtures and fasteners along with necessary CP screws, bolts, nuts, washers etc. as per approved makes etc.complete all as directed by the Engineer-in-charge Note: A sample of each material listed above should be got approved by Engineer-in-Charge before supply. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

135.01 Bow Handle 100 mm. long with back plate, ' D ' section. Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

136 Supplying & fixing 18 /25 mm thick PVC integral free foam sheet in form of flush finish for double leaf cupboard shutter And single leaf kitchen shaft shutter manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet),M/s. Rajashree Plastiwood of approved colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides all edges to be smooth finish with mixture of PVC powder & solvent etc. including dismantling the existing plywood/ A.C sheet shutters/MS shutters/removing the old damaged wooden shelves/shutter/frame and transporting to Deptt. stores etc. complete all as per specification,drawings and as directed by the Engineer- in- Charge. Note:- 1) The entire door shall be jointless shutter. 2) The sizes shall be approximately 600 mm x 2100mm, however exact dimensions shall be measured at site before manufacturing. 3) The rate is inclusive of making of necessary rebate for locking arrangement. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

137 Supplying & fixing heavy duty stainless steel superior quality fittings, fixtures and fastenings along with necessary SS screws, bolts, nuts, washers, etc. as per approved samples. complete all as per specifications and as directed by Engineer- in- Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

138 Supplying & fixing matt finished, anodised aluminium heavy quality fittings, fixtures and fastenings of approved quality, along with CP brass screws, bolts and other accessories as per approved samples etc. complete all as per specifications and as directed by Engineer- in- Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

138.01 b) Bow Handle 100 mm long 10 mm dia. Solid. Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

154 Labour Charges for cleaning, brooming, washing/mopping the all room floors, wc & bathroom of vacant flats, cleaning of fans, window glasses, kitchen plateform, loft slabs, Fan blades, all electrical switches and boards etc including disposing of waste materials including cost of cleaning materials like brooms, detergents/disinfectants etc complete all as directed by the Engineer-in- Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit of Anushaktinagar, Mumbai.

Contract No: DCSEM/CQD/QSB/25-26/NIT/70 dt.09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

PART II - PUBLIC HEALTH WORKS 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

201 Providing, laying, jointing, fixing, testing & painting heavy quality (Class 'C') G.I. galvanized pipes as per I.S. 1239-1968 including fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other tittings required for the completion except screwed flanges conforming to I.S.1239-1968 & also as per the code of practice of water supply in bldgs. of I.S.2065-1972 inlcuding laying under floors, chasing, in walls, roof slabs and making good the same to the original conditions, including the cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. including removing the old damaged G.I. pipes & handing over to dept. stores, scaffolding, testing the pipes etc. complete all as per specificaton and as directed by the Engineer-in-Charge. NOTE : The measurement shall be taken along the centre line of pipes & fittings or specials but excluding flanges. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

201.01 a) 15 mm n.b. RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

205 Providing & fixing approved quality wash basin with plain rims in white glazed vitreous chinaware supported on suitable wall brackets and of size mentioned below, including cost of removing the existing wash basin and necessary C.I. brackets shall be provided by the contractor including all the labour charges for fixing the existing fittings such as piller cock, inlet connection, stop cock, wash coupling, bottle trap etc. & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

207 Providing & fixing heavy quality 15 mm dia inlet connection with unions at the ends plastic pipes with brass unions including the cost of removing the existing one etc complete all as per specifications and as directed by the Engineer-in-Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

208 Providing & fixing approved heavy quality solid plastic seat and lid of white shade with C.P. brass pillar hinges conforming to IS 2548 and including cost of removing the existing one depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge, 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

209 Providing and fixing approved quality 10 Ltrs. capacity PVC flushing cistern of SLIMlINE/CERA conforming to relevant IS, with all internal fittings, pull chain etc mounted on brackets including cost of removing the existing one depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge. A) High/Low level cistern 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

210 Providing and fixing universal Internal Kit of approved make for PVC flush tank (Syphon set + Ball Cock set+ Button Lever set) that fits most of the standard cisterns/flush tanks/ . The kit consists of a Syphon set the controls the outflow of the water, a ball cock set (adjustable) that controls the water inflow and filling of the tank, a lever set that controls the release of water. Made from heavy duty plastic etc. complete as per manufactures specification and as directed by EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

212 Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing &fixing specials, wall flanges and fixing to concealed/ exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leakyjoints if any, including removing the existing and depositing to deptt stores etc complete all as per specifications and as directed by the Engineer-in-Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

212.01 Heavy quality 15 mm n.b. C.P. brass pillar tap of approved make Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

213 Providing and fixing in position bevelled or plain edge mirrors made out of best Indian glass 6 mm thick of approved manufacture, mounted on asbestos cement sheet 6 mm thick fixed in position with 4 Nos. C.P. brass screws with detechable C.P. brass caps washers, rawl plugs and incuding removing the existing one and depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

214 Providing & fixing in position 550x100mm wide & 6 mm thick Glass shelf with brass brackets of approved quality and fixing the Glass shelf on the wall to proper line & level using wall brackets with 40 mm long CP brass screws including making the wall to it's original condition and moulding of edges of glass etc. all as per specification & as directed by EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

216 Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to IS:778 with hand wheels at top including testing for 10 Kg./ Sq.Cm. pressure with clean and potable water with a minimum testing duration of two hours etc including removing old gun metal Gate valve & returning to deptt stores etc complete all as per specifications and as directed by the Engineer in Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

217 Providing and Fixing cPVC Ball valve with S.S balls & Specials, if required of approved make suitablefor pipe pressure class, making water proof joints,for pipe pressure class, making water proof joints,ncluding cost of jointing material and cPVCspecials if required, testing the joints etc. completeas per directions of EIC. SDR-11 (IS 15778)-cPVC Ball Valve 2 Construction of chamber for 100mm sluices valve item3 10 Nos

217.01 15 mm dia. Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

221 Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUREME / PRINCE or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparartion, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line/cPVC/uPVC/PVC with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prine, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc complete. SDR 11 Pipes and Fittings 2 Construction of chamber for 100mm sluices valve item3 10 Nos

221.01 a) 15 mm n.b RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

222 Supplying and fixing following size uPVCUV-Stabilised soil / waste quality pipes andfittings ( SWR ) for soil, waste, vent,antisyphonege, HVAC waste pipe and rain waterpipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil /waste pipe as per IS:13592 and IS:14735 Grade-Blaid in floor & on Exposed faces of wall of Suprememake ii) Fixing the pipeline vertically by Metal clamps iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to properslope and gradient for making connections of soil /waste water pipe line with inspection chamber orManhole, including the cost of cement mortar,cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement &Rubber ring gasket with making holes in walls /floor grooving and redoing the same and bricksupport etc. Giving water-tightness test for thepipes laid as per codal provisions. Providing RingJoint pipes at verticals and solvent cement jointedpipes at consealed locations. vi) Necessary cutting to the required lengthincluding short pieces, fittings with & withoutdoor, assorted fittings such as plugs, tees,couplers, reducers, cross tees, reducing tees,elbows, bends, cleaning pipe, single & double Y,vent cowl, gaskets, offsets, Tank / WC connectorsetc. For Soil & waste and Vent pipe lines 2 Construction of chamber for 100mm sluices valve item3 10 Nos

223 Providing & fixing in position approved quality CP brass stop cock/angle cock/Bib tap / Sink tap etc. of 15 mm nominal dia. with IS mark / approved make of following type including providing & fixing GI specials ,wall flanges and fixing to concealed / exposed G.I.pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints, rectifying the leaky joints, if any, including cleaning etc. complete all as per specifications and as directed by Engineer- in- Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

223.01 a) C.P brass Bib tap with wall flange, .similar to 'Continental series ' of ' JAQUAR' Cat. No. 047 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

227 Supplying & fixing following fittings & fixtures as directed by the EIC & as per samples kept in unit stores 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

227.01 Supplying and fixing heavy Quality CP brass hand held jet spray (Health Faucet) for ablution (minimum weight of 250 grams for CP brass jet spray only) without pipe & wall bracket etc. complete all as per specifications & as directed by the Engineer-in-Charg Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit of Anushaktinagar, Mumbai.

Contract No: DCSEM/CQD/QSB/25-26/NIT/70 dt. 09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

PART III - ELECTRICAL WORKS 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

300 Supply and fixing of the following materials required for maintenance as per Clause No.2 of specifications of Maintenance contract. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

301 Fan Accessories 2 Construction of chamber for 100mm sluices valve item3 10 Nos

301.01 Ceiling fan canopies Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

302 Instantaneous mini water heaters accessories 2 Construction of chamber for 100mm sluices valve item3 10 Nos

302.01 Heating elements / Coil of 3Kilowatt power spherical type double nipple/cup type suitable for 1 liter instantaneous mini water heaters,cup type,similar to sparehot make Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

303 Switches/ sockets/ DP switches similar to CIVIC-XP of M/s. Vinay. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

303.01 6A, SP one way switch Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

304 Lamp Holder & 5" round PVC plate / Square Box Batten Holder / Angle holder / pendent holder/ ceiling rose 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

305 Switches/ sockets/ DP switches similar to Myrius series of M/s. Legrand make. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

305.01 6A, SP one way switch,Myrius catalogue number(6730 00) Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

306 Plastic surface boxes similar to Myrius series of M/s. Legrand make with wood screws & nylon plug. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

1/2 module Plastic surface box Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

307 White plate cover with frame similar to Myrius model of M/s Legrand 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

307.01 1 module plate cover with frame, catalogue number(6732 01) Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

308 1.1 kV grade PVC insulated multi stranded copper wires 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

310 1.1 kV grade PVC insulated, FRLS PVC extruded outer sheath copper flexible cable of following sizes 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

311 MCB/MCCB/RCCB/RCBO, Metal plug & socket DB's 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

311.01 6-32A,SP,MCB, 10kA BC, C-curve Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

313 Switches/ sockets/ DP switches similar to crabtree anthena model/Murano model/equivalent.. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

313.01 6A/10A, SP one way switch,Catalogue number (ACASXXW101) Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

314 White plate cover with frame similar to crabtree, anthena model /equivalent.. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

314.01 1 module plate cover with frame Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

315 Ceiling fan of following sizes without fan regulator 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH and Electrical Works in Vacant flats under TTM-I Maintenance Unit of Anushaktinagar, Mumbai.

Contract No DCSEM/CQD/QSB/25-26/NIT/70 dt.09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

4 Part III - Rebate Items 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

400 Rebate for taking away dismanteled item by the contractor…… 2 Construction of chamber for 100mm sluices valve item3 10 Nos

403 d) CP brass PH items like bib tap, pillar cock, stop cock, …… 2 Construction of chamber for 100mm sluices valve item3 10 Nos

403.01 i) bib tap Nos Less(-) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

404 e) GI Pipes 2 Construction of chamber for 100mm sluices valve item3 10 Nos

405 f) replacement of CI & PVC pipes 2 Construction of chamber for 100mm sluices valve item3 10 Nos

g) GM gate valves up to 50 mm dia. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Please Enable Macros to View BoQ information