COMPREHENSIVE MAINTENANCE AND PERIODICAL SERVICES OF MES IB AND AREA OFFICER MESS AND VIP BUNGALOW OF AGE B/R WEST UNDER GE (WEST) COLABA, MUMBAI

Amount

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness, complete all as specified and directed.

M&L for 25mm thk PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in subbase of floors, complete all as specified and directed.

M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/ highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles, complete all as specified and directed.

M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and directed. Note : Work will be in patches or in bulk.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 10mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc., complete all as specified and directed.

M & L for digitally Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 10mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc., complete all as specified and directed.

M & L for Virified Ceramic tiles in skirting 10 mm thick (square/ rectangular) polished, area of each tiles match as the size of floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm backing coat in CM (1:4) and pointed in white coloured cement to match, in floors etc., complete all as specified and directed.

Material and Labour for heavy duty outdoor vitrified tiles dark or light shade /double charge /ultra charged 15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing, complete all as specified and directed. Note : Work will be in patches or in bulk

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M & L 20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including screed bed 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6), complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:4), complete all as specified & directed by Engineer-in-Charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc, complete all as specified and directed.

M & L for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement, complete all as specified and directed.

M & L for rendring 15mm thick in cemet mortar 1:6 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement, complete all as specified and directed. Note : WPC will be measured and paid separately.

M & L for rendring 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral liquid water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness, complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered or unplastered surface of wall incl washing/ rubbing down and stopping of old painted surfaces of ncluding cornices etc and making good of holes by filling holes in plastered surfaces with POP and applying one coat of plastic exterior emulsion paint, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surface of ceiling by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots.and applying one coat of Oil bound distemper on ceiling, complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or unplastered surface of wall, cornices by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots.and applying one coats of oil bound distemper on wall, complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or unplastered surface of wall incl washing/ rubbing down and stopping of old painted surfaces of ncluding cornices etc and making good of holes by filling holes in plastered surfaces with POP and applying one coat of plastic exterior emulsion paint, complete all as specified and as directed by Engr-in-Charge.

M&L for complete removal of existing treatment & paints including preparation of old plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness, complete all as specified and directed by Engr-in-charge.

M&L for prepartion of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as directed by Engr-in Charge.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and Labour for French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE all as specifeid.

S & F in repair 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface, complete all as specified and directed as approved sample as kept in GE Office.

S & F in repairs frosted film / sunfilm / logo in any type or design and size, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame, complete all as specified and directed.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each, complete all as specified and directed.

Taking down shutters of any description exc 2.00 sqm each, complete all as specified and directed.

S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR, complete all as specified and as directed and As approved by Accepting Officer

S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc, complete all as specified and directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 70mm x 45mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position screwed with full body threaded star headed SS screws having, complete as per direction of Engineer- in - Charge.

Supplying and fixing factory made 28-30mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressed treated, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Factory made glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.24 (a) supplied and fixed to chowkats, complete all as specified and directed.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround, complete all as specified and directed.

S&F Powder coated Aluminium anodised frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge, complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed by Engr-in-Charge.

S&F 4.8mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane, complete all as specified & directed by Engineer-in-charge.

S&F 3mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane, complete all as specified & directed by Engineer-in-charge.

M & L for plain sheet glass plain 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out of old/broken glass, complete all as specified and directed.

S & F in repairs 10 to 12 mm thick Toughned glass as in door shutters, plateform. partition including necessary cutting to shape, drilling holes as reqd, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws, complete all as specified and directed.

S&F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete fixed as in repair, complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface, complete all as specified and directed.

S&F Butt hinges (ISI marked) 100mm size medium weight cold rolled ms in any type of chowkat or frame including welding if required, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles (ISI marked) fabricated type, anodised, complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt plate with hasp and staple (bolt type), 250 mm size and fixing in clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as directed by Engr-in-charge.

S&F Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) as in repairs, complete all as specified and directed.

S&F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S & F in repairs 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work, complete all as specified and directed.

S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S & F in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site, complete all as specified and directed.

S & F aluminum anodised barrel tower bolts of extruded section 200 mm long, bearing ISI mark, complete all as specified and as directed.

S & F in repairs aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark, complete all as specified and directed.

S & F in repairs aluminum anodised handle fabricated type extruded section of 150mm long, bearing ISI mark, complete all as specified and as directed.

S&F in repairs Stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc, complete all as specified and directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works, complete all as specified and directed.

supply and fixing in repairs of Spring Polyester Roller Blinds spring component easy for useing, once touch up the second pull stop, can stay any positions you want.Spring strength can be adjusted by a key with hanging rails, mounting bracket , spring , weight including all accessories and required hard ware in different size of window indifferent rooms, complete all as specified and directed.

S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union incl urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

S & F in repair Vitreous china premium/1st quality urinal half stall type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union incl urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

S & F in repair 6mm thick of size 600x450mm looking mirror fixed to wall with stainless steel plugs/ connecter/ spacers/ screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position, complete all as specified and directed.

S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4, complete all as specified and directed.

Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed.

S & F in repair Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size, complete all as specified and directed.

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S & F in repairs Flushing cistern of PVC 10 ltr capacity valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing, complete all as specified and directed.

S & F in repairs Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repairs Vitreous china premium/1st quality wash basin (counter top), white, size 550x400 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repairs Vitreous china premium/1st quality wash basin flat back white, size 630x450 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type, complete all as specified and directed.

S & F in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair, complete all as specified and directed.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs Angular Stop Cock, CP, fancy type with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed, complete all as specified and directed.

S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe, complete all as specified and directed.

S&F in repairs Brass CP wall Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe, complete all as specified and directed.

S & F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

Supply & fixing in repair Jet spray for water closet pan pedestal pattern including making connections and fixed in position, complete all as specified and directed.

S & F in repair brass chromium plated shower 15 mm bore single shower rose incl shower arm fancy type fixed to pipe, complete all as specified and directed.

S & F in repair Toilet paper holder with flat recessed type stainless steel, complete all as specified and directed.

Supply & Fixing 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections, complete all as specified and directed.

Supply & Fixing 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections, complete all as specified and directed.

S&F in repairs 15mm dia two way angle cock of brass, chromium plated fancy type glossy finish fixed, complete all as specified and directed.

S & F in repair CP Cockroch trap(127x127mm) with waste hole as per cat No FT-25 and setting new one in CM 1:3, complete all as specified and directed.

S&F in repairs PVC connection 450mm long and 15 mm dia with brass fly nut at both ends, complete all as specified and directed.

Supply and fixing in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level, complete all as specified and directed.

Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc., complete all as specified and directed.

Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc., complete all as specified and directed.

S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc., complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc, complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius, complete all as specified and directed.

Supply & fixed in repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm, complete all as specified and directed.

Supply & fixed in repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall, complete all as specified and directed by Enginer in charge.

S & F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank, complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks of 3000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank, complete all as specified and directed.

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for any capacity PVC tank, complete all as specified and directed.

S & F in repairs 15mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed.

S & F in repairs 20mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed.

S & F in repairs 25mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed.

M&L for 8 mm thick laminate wooden flooring, water resistant, termite resistant,polished flooring in a flating glue less click locked & sealed flooring similar to a jigsaw puzzle.In this method, the individual planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed, incl dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets, complete all as specified and directed.

M &L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately), complete all as specified and directed.

M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

Material and Labour for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 complete all as specified and directed with following:- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

M&L for Anodised aluminium snap grid frame work for false ceiling all as specified. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work complete.

M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturer instructions, complete all as specified and directed.

M& L for two coat of Oil bound distemper on ceiling surface including prepration of new surface, complete all as specified and directed.

Supply and fixing for PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

S&F for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed.

Supply & Fixed in repair 12 mm thickness fluted WPC indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface, complete all as specified and directed and approved sample as kept in GE Office.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete encluding all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings, etc. and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc, complete all as specified and directed.

Taking down carefully copper/aluminum submain/ copper flexible cable wiring, complete all as specified and directed.

S&F in repairs non-metallic PVC casing capping of size 25X12mm, complete all as specified and directed.

M&L for Point wiring (concealed type) with 1.5 sqmm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix concealed 1.2mm thick pressed steel sunken box along with cover plate and frame, suitable for fixing moduler switch/ socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sqmm green in colour/paint as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putty and apply two coats of paint, match with existing colour/paint in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell point/ Ex Fan point / wall fan point controlled by one modular switch, 1 way 6/10 amps, 1 module, complete all as specified and directed.

All as per serial No. 129 here-in before but for one bell point controlled by one switch.

All as per serial No. 129 here-in before but for One 3 pin socket point 5 Amps on independent board.

All as per serial No. 129 here-in before but for One 3 pin socket point 5 Amps on same board.

All as per srl item No. 129 here-in-before but for one socket point 15 Amp with 2.5 sqmm PVC unsheathed FRLS wire along with 2.5 sqmm green colour wire as earth contuinity conductor connected to common earth dolly.

All as per srl item No. 129 here-in-before but for one socket point 15 Amp with 4 sqmm PVC unsheathed FRLS wire along with 4 sqmm green colour wire as earth contuinity conductor connected to common earth dolly.

S&F in repairs Moduler Switch single pole, one way 6/10 Amp with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, complete all as specified and directed.

S&F in repairs Moduler Switch single pole, one way 16 Amp with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, complete all as specified and directed.

S&F in repairs Moduler socket 2/3 pin 6 Amp with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, complete all as specified and directed.

S&F in repairs Moduler socket 6/16 A 2/3 pin with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, complete all as specified and directed.

S&F in repairs Moduler stepped type electronic fan regulator 450 watt flush type, two module with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, complete all as specified and directed.

S&F in repairs Moduler bell push, 2 modue, 10 Amp with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, complete all as specified and directed.

S&F in repairs Metal AC/ Geyser Box with Socket and 20 Amp SP mini MCB in plastic box enclosure along with cover plate and top, complete all as specified and directed.

S&F in repairs bell ding dong, AC, 230 volts, single pole, complete all as specified and directed.

S&F in repairs ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified and directed.

M&L Sub main wiring with two runs of 6 sqmm stranded copper conductor PVC unsheathed FRLSH wire along with 6 sqmm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 44 mm dia) for housing the wires from panel / Main DB to house SPN DB, complete all as specified & as directed by Engr-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M&L for Sub main wiring with two run of 4 sqmm stranded copper conductor PVC unseathed FRLSH wire along with 4 sqmm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Internal DB to DB, complete all as specified & as directed by Engr-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length.

S&F in repairs 20 watt LED white /warm white 4 feet long fixed on PVC square for mounting the fittings and electrically conncected with suitable size of PVC insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting), complete all as specified and directed.

S&F in repairs surface mounted 9/10 watts white /warm white LED tube light fitting and electrically conncected with suitable size of PVC insulated multistranded copper flexible cable from ceiling rose to light fitting, complete all as specified and directed.

S&F in repairs LED Mirror light fittngs 2 feet 10W extruded polycarbonate, golden type electrically conncected with suitable size of PVC insulated multistranded copper flexible cable from ceiling rose to light fitting, complete all as specified and directed.

S&F in repairs exhaust fan plastic body having 40 watt power double ball of bearing high speed of sweep size 250 mm, inbuilt bird gaurd with louvre and air delivery more than 900 CMH with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement, complete all as specified and directed.

S&F in repairs decorative wall mounting fitting, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass with nickel finish base diffuser and with LED bulb E27 of capacity 7 watt, complete all as specified and directed.

S&F in repairs LED 18/22 Watt 3000 K/6000k, Slim raccess mounted Circular LED panel bright white/ warm white with premium diffuser to ensure glare free & even light distribution in area, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement, complete all as specified and directed.

S&F in repairs LED 36 Watt 3000 K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement, complete all as specified and directed.

S&F in repairs sheet metal enclosures double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar for single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection, complete all as specified and directed.

S&F in repairs sheet metal enclosures double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection, complete all as specified and directed.

S&F in repairs MCB SP 240 volt, 16 to 40 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

S&F in repairs MCB SPN 240 volt, 40 to 63 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

Transportation and fixing or refixing of Ceiling Fan/Exhaust fan of any size with hooks, nuts bolts, Down rod, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement, complete all as specified and directed.

N F ENTERPRISES (BID ID -3414571)

RUPESH CONSTRUCTION CO (BID ID -3414539)

Unitech Enterprises (BID ID -3413814)

S S ENTERPRISES (BID ID -3420010)

Nilesh Construction (BID ID -3419616)