REPAIR TO PLASTERING, TILING, FLOORING, JOINERY, PLUMBING, ROOF REPAIR AND MISC REPAIR INCLUDING PETTY REPAIR WORKS TO BLDGS IN SAFED SAGAR AREA AT AFSSR UNDER GE AF GURGAON

Amount

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed.

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each complete all as specified and as directed.

Taking down and removing Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. Note the area includes in this up to G+1 stories building

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1 (using 20mm grade stone agg) as in plinth protection even and smooth without using extra cement in ground floor and paving n. exc 5 cm thick complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed .

M&L for 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed .

M&L for Non skid coloured ceramic tiles 600x600 area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 300x300mm, area of each tile not exceeding 0.11 Sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed.

M&L for Kota Stone 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, flooring platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and as directed.

M&L for Machine cut Granite Stone Slab (Black in colour) 16-20mm thick, fixed on Kitchen Platform, Floor or on Shelves, laid over and including Cement Screed 15mm thick in Cement Mortar 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, complete all as specified and as directed.

S&F Aluminium anodized powder coated(minimum thickens of powder coating 50 micron) three track sliding Window, Shutters (size 45x15mm) i.e two shutter with 4.8 mm thick tinted glass and one with stainless steel wire cloth of 0.36 mm dia and avg width of aperture 1.40 mm and sliding section confirming Cat No. 20814(from Jindal) and frame size 101.40x44.50 x1.90 mm etc including all necessary locking arrangement complete all as specified and directed. Aluminium Grill to be provided , etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, complete all as specified and as directed. NOTE: (a) Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. (b)For the purpose of Measurement & Payment all Shutters with Frame shall be considered as One Unit and only front portion shall be measured for payment.

S & F in repairs 125x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete all as specified and as directed.

S & F in repairs 105x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete all as specified and as directed.

S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tub, suppling & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 30 mm thick 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.

S&F Cold Rolled Mild Steel Butt Hinge 100mm long medium weight and fixed, complete all as specified and as directed.

S & F aluminium anodised, barrel tower bolts of extruded section 125mm long and fixed complete all as specified and as directed.

S & F aluminium anodised, barrel tower bolts of extruded section 200mm long and fixed complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Aluminium Handle 100mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Taking up or down steel tubing 15mm / 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified and as directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S & F in repair 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type, cast copper alloy, chromium complete all as specified and as directed.

S & F in repair single towel rail 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and as directed.

M & L in repair for hand shower (health faucet) with 8mm dia 1.20 mm long flexible tube and wall hook complete all as specified and as directed.

S & F in repair for PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) size 350x475x390 with Trap and Fixing Bolts and Making Good to Floor/ disturbed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 21027/ JAQUAR CNS-WHT553SN/ PARRYWARE C-0252(S) or equivalent out of makes spd in list of makes.

S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR CNS-WHT-111N or equivalent out of makes spd in list of makes.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. MAKE: CERA 1003 (COUNSEL)/ PARRYWARE C-0406 or equivalent out of makes spd in list of makes.

S&F Vitreous China White Squatting Pan of size 580x440mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 20042 (Stra White) or equivalent out of makes spd in list of makes.

S&F PVC Flushing Cistern 10 Litre capacity twin flush type White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. MAKE : CERA (CAMELIA) Cat No. 2603 or equivalent out of makes spd in list of makes.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs stainless steel plate rack (wall mounted) of size 600mm x 750mm x 250mm of stainless steel 0.63mm thick with four shelves complete all as specified and as directed.

M&L for Rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mmm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even completed all as specified & as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement complete all as specified and as directed. Note the area includs in this up to 4th stories building.

M&L for Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces upto double storey, mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified and as directed.

M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement complete all as specified and as directed. Note the area includs in this up to 4th stories building.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket (shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames or metal frame including punching or drilling out old glazing pin/ spring clip or glazed with oil putty or fixed with window beads complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n exc 0.5sqm each pane complete all as specified and as directed.

M & L for a coat of alkali resistant over already prepared surface of wall complete all as specified and as directed.

M&L for Providing and applying plaster of paris putty of 1mm thickness on plastered surface to prepare the surface smooth and finishes complete all as specified and as directed.

M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying one Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of white wash on old surface of ceiling complete all as specified and as directed.

M & L for new plaster surface applying three coat white wash ceiling surface with roller brush complete all as specified and as directed.

M&L for preparing new Plastered surfaces of Walls by applying Wall Care Putty 1 to 1.5 mm thickncluding Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L for preparing newly Plastered surfaces of Walls by applying Wall Putty 1 to 1.5 mm thick , cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing old Decorated/Treated Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

M&L for Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with MS Clamp dash true nut and bolt complete all as specified and as directed.

S & F 75mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with MS Clamp dash true nut and bolt complete all as specified and as directed.

S & F 110mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

Demolition of PCC / sub base in sunken / toilet floor area and removing all WCs/WHB or other fittings carefully and keep it safe till refixing complete all as specified and as directed.

M&L for 15mm average thick rendering in cement mortar 1:3 mixed with WPC ( (Dr Fixit 101LW+ or equivalnet ) in the proportion and as recommned by the manufacturer on concerete surfaces including finishing the surfaces even and smooth without using extra cement and provide necessary slope towards GI Spouts in CM 1:3 complete all as specified and as directed. (Note : Rate of WPC shall be incl in quoted rate.)

M&L for applying two layers WPC (Dr Fixit 301 or equivalent) as first layer of slurry @0.488 kg/sqm mixed with acrylic based polymer modified cementitious composite compund 0.253kg/sqm and the second layer (same as first layer) shall be applied after allowed to air cure for 4 hours to first layer complete all as specified and as directed.

S&F 50mm dia bore GI Pipe 450mm long (light grade) projecting 150mm from outer face of wall and the slope of sunken slab as spouts to drain out accumulated water complete all as specified and as directed.

M&L for cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed.

S&F Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet, 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed.

M&L for Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and as directed.

S&F factory made PVC kitchen cabinet in reqd isze at side made out of 18mm thick 100% lead free one side decorative lamination and other side balancing lamination sheet consisting of Carcass sheet all reqd brackets 5.5 screw etc. All the edges shall be covered wiht 2mm thick edge benging tape or 90 degree edge bent finish as per make specification mentioned as per drawing and specification provided / approved by Engr-in-Charge. All shutters are to be fixed with continuous piano Hinges to cupboard & 01 x 100/125mm decorative handle to be provided to each shutter / drawer , Stainless steel screw of size 35mm x 6mm to be used and incl dismantling of existing unsv cupboards complete all as spd and as directed. (Note : Rates of all fixing arrangement / piano Hinges/ handles/ screws are to be included in quoted rates.

Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed.

Dismantling and refixing of existing PVC tank upto 500ltr capacity incl necessary fittings and arrangement , keep it safe till roof treatment and refix again complete all as spd and directed. (Note : rates are included for all necessary fitting and fixing arrangement of GI fittings ) complete all as specified and as directed.

Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) complete all as specified and as directed.

M&L for PCC type B-0, 1:3:6 (using 12.5 mm graded stone aggregate) as in laying on roof, coping, kerb, finishes complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces of roof slab / conerete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3.0 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused with blow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial remittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as spd and as directed.

M&L for repairing of RCC projection, chajja, roof facia, celling by scrapping, cutting, de-rusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster 1:3 one or two layer as reqd and also used chicken wire mesh as reqd with or without facia and smooth finished incl two coats of finished to match with the existing surface at any height and in any situation including necessary form work complete all as specified and as directed.

M/S GEETANJALI ENTERPRISES

FAIR ENGINEERS & CONTRACTORS

shiv shanker enterprises

Chaudhary Constructions

Orbital Infra Power

k k enterprises

M/S ujjwal associates

M/s GANJOO AND CO