33-11 KV Defence Corriodor Sub station and 33 and 11 KV Line

Amount

SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1A

33 KV CT 200/1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11 KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

11 KV 3 Core XLPE Cable:- (ii) 3 × 185 Sq.mm

11 KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

11 KV Cable jointing kit. Heat Shrinkable:- (ii) 300 Sq.mm Outdoor

11 KV Cable jointing kit. Heat Shrinkable:- (iii) 185 Sq.mm. Indoor

11 KV Cable jointing kit. Heat Shrinkable:- (iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

G.I. 33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule

G.I. Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule

G.I. Structure for Line Isolator with Plinth & Foundation

G.I. Structure for Bus Isolator with Plinth & Foundation

33 KV Post Insulator

G.I. Structure for Post Insulator with Plinth & Foundation

G.I. Structure for Lightening Arrestors with Plinth & Foundation

90 Lbs. Rail pieces for T/F

G.I. CT Steel structure with Plinth & Foundation

G.I. Structure for P T with Plinth & Foundation

33 KV Fuse Set

G.I. Structure for fuse Set with Plinth & Foundation

24 V Battery with Battery Charger and Cabinet. as per attached specification

Control Cable 4 × 2.5 Sq.mm.

Control Cable 2 × 2.5 Sq.mm.

L.T.P.V.C. Cable 3½×70 mm2

Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Earth Mat for outdoor equipment

(ii) Earth Mat for indoor equipment

Pipe Earthing of Power Transformer by way of boring and lowering of “B” class G.I. pipe 50 mm. dia. into the ground up to the water level to the lower end of which a solid copper con approx 9 inches long and 750 gram in weight provided and screwed in connecting and bringing out continuous copper wire 8 SWG from the cone to the ground surface where it will be bolted to the G.I. Earth strip for Transformer neutral connection. The earth strip will be welded to the G.I. pipe. The work also includes the cost of all material with all labour and T&P etc. complete in all respect.

Chemical Pipe Earthing

"L" Type Structure for Neutral : Fabrication and grouting of G.I. Channel 100x50x6 mm. in L shape & in proper size and alignment to provide support for the Earthing strips for power transformer neutral including supply & fixing of flexible copper bonds (0.5 Mtr. long, 65x8 mm size) for neutral Earthing. The work also includes painting of angle with two coats of aluminium paint.

Structure For cable support : Fabrication and grouting of cable support made of two pieces of G.I. 75x75x8x4500 mm. x 2 No. joined to each other by means of 5 Nos. flat 50x6 mm. pieces of size 150 mm. long each by welding at equal intervals as per drawing and grouting in a block of size 300x300x700 mm complete with two coats of Aluminum paint. This includes providing of four nos. G.I. clamp made of G.I. flat for holding the cable including Nuts & bolts.

PLINTH OF 5 MVA, 33/11 KV TRANSFORMERS : Construction of plinth of size 3.46x4.46 Mtr. for 5 MVA Transformers as per Resspo norms.

Plinth & Foundation of 33 KV VCB

11 KV Cable laying Including cost of sand and Bricks as per Resspo norms and latest guidelines issued by UPPCL

Cost of Furniture for control room (Steel table, chair, branch & rack) : (Office Chair with arms made of Wooden with proper cane seat & back. - 2 no, Office Table having size 1520 x 900 x 760 mm. made of Steel Pipe in square shape having two No. Drawers & 10 mm. Top Board with Sun mica. - 2 No., Sitting Bench made of Steel Pipe of size 183 x 450 mm. with three seats with Sun mica - 1 No.,Stool of size 450 x 300 x 455 mm. having sitting top of 12 mm. Board with sun mica. - 2 No.,Office rack made of Steel Pipe & M.S. Sheet of size 750 x 900 x 400mm. - 1 No Cost of Fire Fighting equipment with stand complete :Fire extinguisher CO2 type 5.0 Kg. capacity I.S.I. mark. - 1 No, Fire extinguisher CO2 type 4.5 Kg. capacity I.S.I. mark. - 1 No., Fire Bucket stand size 1500x1200mm. having M.S. Channel 100x50 mm base with cross triangular bracing of M.S. Angle 50x50x6 mm and base of 100x50 mm. Channel 600 mm long having pipe 25 mm and boxing pipe of size 32 mm. including welded with M.S. hooks rigidly and nicely painted with one coat of red oxide primer & two coat of red enamel paint of best quality. - 1 No., Fire bucket made of B.P. sheet 20 gage ( conical shape ) having capacity 10 Ltr.- 10” dia with bar handle for hanging of bucket including nicely painted in inner portion with one coat of red oxide primer & two coat of channel white paint & outer side with one coat of red oxide primer & two coat of post office red colour & written work “AAG” in Hindi. - 4 No., Chakkered rubbur sheet 2000x1000x10 mm. I.S.I. mark. - 4 No.,

Alluminium Paint of Asian paints product for painting of Sub-Station Structure & equipment.

Red Oxide Paint of Asian paints product for painting of Sub-Station Structure & equipment.

33 KV LINE :- 11 Meter long STP (SP-55)

13 Meter long STP (SP-70)

M+6 G.I. Tower 19.300 Mtr. Long (2571 Kg.)

ACSR DOG CONDUCTOR (9.9 X 3 + 3% Sag and Jumpering)

33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.

33 KV Pin Insulators

33 KV Pin with nuts

33 KV Disc Fitting B & S Type – 70 KN

33 KV Disc Insulators B&S Type 70 KN

G.I. 33 KV 'V' Type X-arm

33 KV Cross arm holding clamp with nuts, bolts & washers

" F " bracket for 33 KV line

" E " bracket for 33 KV line

Armour rod with ferrule for Dog conductor

G.I. Angle 65x65x6 mm, 4300 mm long for bracing with clamps

G.I. Top Channel 125x65 mm, 3200 mm long with 2 nos clamps

G.I. Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps

P.G. clamps for Reccoon/Dog

G.I. Nut, bolt with washer

G.I. Guarding Angle 65x65x6x3010 mm

Holding clamp for guarding angle with nuts & bolts

G.I. Barbed wire

G.I. Wire No. 6 SWG

G.I. Wire No. 8 SWG

Stone Pad (300x300x75 mm.)

33 KV Number plate with clamp with nuts, & bolts

33 KV Danger board with clamp with nuts, & bolts

Alluminium binding wire- 6 SWG

Alluminium paint of Asian paints product

Red oxide paint of Asian paints product

Turn Buckle

Eye bolt 12 x 110 mm

Earth wire clamp with nut & bolt

G.I. 65x65x6x1600 mm Cross Arm Holding Angle with Clamp nuts & bolts for S.T. Pole

ACSR Insulated Dog Conductor for cable connection

Alluminium Lug 3x300 sqmm

33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable of make Raychem/3-M as per attached specification

Clamps for fixing of cable and cable box

Supply of G.I. Pipe 160mm dia Pipe as per attached specification

Clamps for holding of G.I. Pipe

Supply of HDPE Pipe 160mm O/D PN-6, PE-100 Grade UV Stabalized for laying of 33KV, 3x300Sq.mm

Earthing of Pole by M.S. earthing Rod of 20 x2500 mm and 6 SWG earthing wire etc.

Stay Complete (G.I Stay rod 20x1800 mm, Stay Insulator, Stay wire 7/8 SWG and Stay clamp, concreting, Nut, bolt with washer)

Concreting of S.T. Pole 11.0 Mtr. long

Concreting of S.T. Pole 13.0 Mtr. long

Concreting of Tower with M-20 Grade concrete for foundation with shuttering and making of plinth

Tree branches/cutting choping charges

Construction of RCC trench with cover for laying of double 33 KV 3x300 sq.mm XLPE Cable

Digging of trench and Laying of 33 KV, 3x300 sq.mm. cable below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job

Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below the Railway Track or as per drawing approved by railway/Highway by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches.

Hanging & Proper dressing of 33 KV, 3x300 XLPE Cable within G.I.Pipe on Double Pole Structure

Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Road Restoration Charge (Pucca Road)

Road Restoration Charge (footpath/Kachha Road)

Cable Route Marker

Wooden Bushes

Connecting clamps

G.I. Tee Channel 125 x 65 x 2240 mm. x 1 No. with Clamp, nuts & bolts

Straight Through 33 KV 3x300 sqmm

11 KV LINE :- 8.5 Mtr. Long PCC Pole

11 Mtr. Long STP Pole (SP-55)

ACSR Dog Conductor (8.0x3+3% Sag and Jumpering )

LT Al. XLPE Insulated cable 1x16 Sq.mm

11 KV TPMO with fixing clamp complete

11 KV Fuse set with fixing clamp complete

11 KV Disc fitting B&S Type 45 KN

11 KV Disc Insulator B&S type (45 KN)

11 KV Pin Insulator

11 KV Pin with Nut & bolts

G.I. Top Channel 125x65x6mm, 2240mm long

G.I. Top Channel 100x50x6mm, 2240mm long

G.I. Dropper Channel 100x50x6mm, 2028mm long

G.I. 11 KV V-Type X-arm

G.I. Angle Iron 65x65x6mm, 2700mm Long bracing Complete with Clamps

G.I. Angle 65x65x6mm, 2028mm Long for G.I. Pipe [email protected] Kg./M

G.I. T-Off Channel 100x50x1300mm with Clamp nut& bolt

G.I. Guarding Angle 65x65x6x3010 mm

Holding clamp for guarding angle with nuts & bolts

F-Bracket with Bolt & Nuts 11KV Line

E-Bracket with Bolt & Nuts 11KV Line

Clamp for fixing X-arm with Nuts & Bolts

G.I. Angle 50x50x6x1500 mm for top channel support

Holding Clamp with nuts & bolts

Painting number mark with paint

11 KV Danger Board with Nut & Bolt

PG clamps

GI Wire 6 Nos.

GI Wire 8 SWG.

GI Barbed Wire

Stone Pad (300x300x75mm)

Al. Binding wire -6 SWG

Supply of G.I. Pipe 160 mm dia

Eye Bolt

Turn Buckle

Alluminium paint of Asian paints product

Red oxide paint of Asian paints product

Stud Connecting Clamps

Earthing of Pole by MS earthing rod of 20x2500mm. & 6 SWG earthing wire etc.

Stay Complete (GI Stay Rod 16x1800mm, Stay Insulator, Stay wire 7/10 SWG and Stay clamp, concreting, Nut, bolt with washer)

Concreting of Supports (8.5 Mtr. PCC)

Concreting of Supports (11 Mtr. STP)

11 KV Lightening arrestor

Copper L-Piece 400x50x6 m.m. for LT bushing rod of T/F

Al. crimping lugs 35 sq.mm.

Al. crimping lugs 50 sq.mm.

Al. crimping lugs 70 sq.mm.

SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)

Tree branches/cutting choping charges

G.I. Bolts ,Nuts & Washer

2x4 sq.mm. PVC armoured Cable

PVC conductor pipe 15 mm

D.P. Switch 63 A

Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring.

LED light 100 Watt complete with fitting and accessories of make Philips/Havells

Carriage of following material from Center Store to Site 33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

11 KV SWITCH GEARS VCB:- (ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

33 KV CT 400/200/1A

33 KV CT 200/1A

33 KV 1 Ph PT 33 KV/110 V

11/0.4 KV, 63 KVA Transformer.

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

11KV 3 Core XLPE Cable:- (ii) 3 × 185 Sq.mm

33 KV LINE :- 11 Meter long STP (SP-55)

13 Meter long STP (SP-70)

ACSR DOG CONDUCTOR

33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.

11 KV LINE :- 8.5 Mtr. Long PCC Pole

11 Mtr. Long STP Pole (SP-55)

ACSR Dog Conductor

Gowri Associates (BID ID -5587590)

PREMIER ENGINEERING COMPANY (BID ID -5586995)