ADDN,ALTN AND SPECIAL REPAIRS TO BLDG NO P 07 (SAILORS INSTITUTE) AND ADDN,ALTN AND SPECIAL REPAIRS TO BUILDING NO P 09 (SENIOR SAILORS COOKHOUSE AND DINNING HALL) AT INS KADAMBA NAVAL BASE KARWAR.

Amount

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m and n.exc 250m. complete all as specified and directed.

M & L for providing 15mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed

M & L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighting not less than 4 Kg/Sqm of approved make including minimum 10 cm side lap and 15cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.1Kg/Sqm complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed

M &L for applying two coats of water proofing coating system by applying shalicryl-215 of STP Ltd/Rain coat 601 of DR fixit /Barrier coat of Araldite over a coat of respective primer including preparation of plaster surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturers instructions complete all as specified and directed.

M & L repair of cracks by Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks etc.

M & L 110 mm dia. PVC rain water pipes with Socket all as specified and directed.

M & L 110 mm dia. PVC rain water pipes bends all as specified and directed.

S & F in repairs Stack clamps out of 50mm by 5mm including bolts and nuts and securing ends of stay to wall or roof for 110mm pipe.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M&L for Glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) and taking down old tiles complete all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 20 mm thick in cement mortar(1:4) for laying floor finishes and taking down old tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm and n exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm th screed bed in CM 1:6 complete all as specified and directed.

M&L Providing precast cement concrete solid building blocks exc 10cm width, type C1,1:3:6 (20mm graded aggregate) set in cement mortar 1:6.all as specified and directed

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete surface is to be finished even and smooth (without using extra lime or cement)→complete all as specified.

M&L for preparation of new plastered surfaces of walls of any description including and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

Taking up or down GI tubing and connections 15mm bore including cleaning or removal to store all as specified and directed.

Taking up or down GI tubing and connections 20mm bore including cleaning or removal to store all as specified and directed.

S & F 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc

S & F 20 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc

S&F in repairs vitrous china wash basin coloured oval type 560 x 410mm complete but excluding pillar taps.(Make Hindware Cat No 10017 starwhite or equivalent in parryware or Nycer) all as specified and directed.

S & F for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

M & L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed

S & F 75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed

S & F in 32mm bore PVC waste pipe with fittings of approved make suitable for WHB, urinals etc complete all as specified and directed.

S & F in repair for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) fixed in repairs,complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white, including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. Note : Quoted rate shall excludes the cost of flush pipe, cistern & seat cover and the same shall be paid seperately under respective item.

S & F plastic water closet seat and cover, black, closed pattern with flat bottom suitable for pedestral / Semi pedestral pattern water closets and mild steel chromium plated or aluminized hinging device all as directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S&F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes all as specified and directed.

Supply and fixing 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Sqcm including bends elbows, tees etc & fixing materials i.e HDPE/PVC gum laid in trenches complete all as specified and directed

S&F in repairs brass Chromium Plated Health faucet with spring pipe and rquired nipple all as speified and directed. Make: Jaquar Cat No ALD-CHR-585 or equivalent in makes Marc/Kohler.

S&F Aluminium anodised tubular towel rail 19/20mm dia all as specified and directed.

S&F brackets aluminium anodised, suitable for item No.31 herein before.

S&F in repairs stop valve, cast copper alloy fancy type chromium plated with long shank & cup concealed type for iron pipe of 15mm bore of etc complete all as specified and directed.

S & F in repairs bib taps, long neck type, cast copper alloy fancy type, chromium plated, screwed for iron pipe15mm bore all as specified and directed.

S&F in repairs Pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S & F in repair mild steel Chromium Plated grating 125mm dia with or without waste hole fixed on floor/ nahani trap with cement mortar, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S & F in repair 15mm bore 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed by Engr-inCharge.

Taking down chowkats exc 1.5 Sqm but n. exc 4 Sqm with shutter (without taking off shutters from the frames) all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction & drawing.

S&F butt hinges medium weight cold rolled mild steel 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 250mm long.

S&F aluminium alloy anodised handle, cast type 100mm long.

M&L mild steel structural Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Grade E-250) quality A complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards all as specified and direced.

Supply only chain link MS galvanised fencing 3mm dia wire and 100x100mm mesh all as specified and directed.

M&L preparing of old painted plastered surface of walls of any description including cornices and applying one coats of acrylic emulsion exterior grade, weather proof antifungal paint complete all as specified and directed.

M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of ceiling including preparation of surfaces all as specified and directed.

M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of surfaces all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes and taking down old tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm and n exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm th screed bed in CM 1:6 complete all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L screed bed or bedding layer 20mm thick in cement motar 1:6 to receive topping layer such as tilling etc complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed (Size of kota stone shall not be less than 60x60cm)

M&L for Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.

M&L Steel rolling shutters 1.25mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as specified and as directed.

M & L Providing plain cement concrete type B1 1:2:4 (20mm graded agg) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for applying two coats of synthetic enamel paint over a coat of primer on steel surfaces of any description, over 10cm in width or girth,not otherwise described

S&F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed

S & F in repairs concussive push button taps of cast copper alloy, screwed for iron pipe and fixed all as specified and directed

S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed.

S&F prelaminated particle board 12 mm thick interior grade, prelaminated both side with decorative choice lamination as in kitchen cabinets/shutters fixed with screws in aluminium frame work complete all as specified & directed.

S&F Aluminium body, door closer, hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed.

S&F extruded aluminum alloy handles, fabricated type 150mm size all as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long all as specifed and directed.

S&F butt hinges 125mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone agg as in foundation filling and mass concrete complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified & directed.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L 50mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls of any description including and applying two coat of cement base paint complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M &L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slabs supported on wall complete all as specified and directed.

M & L Formwork (rough finished surfaces) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Form work to soffits of suspended slab such as roof slab, floor slab etc. not exceeding 200mm thick fair finished complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling structural steel work as in doors, gate but excluding framed truss etc.

M&L for preparation of old decorated wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and appyling one coat of Acrylic washable distemper complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated ceiling surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and appyling one coat of Acrylic washable distemper complete all as specified and as directed by Engr-in-Charge

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L in repair for point wiring complete with 1.5 Sqmm two single core PVC insulated, unsheathed 1100volts agrade cable with stranded copper conductor FR grade conforming to IS-694 part II with ISI mark FR grade drawn through and including suitable size rigid non metalic PVC conduit concealed with all accessories, including suitable size sunkpresses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated unsheathed solid copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point.

All as per Item No 96 above but One 5 Amps socket point on independent board

All as per item No.2 here in before but for using 2.5 sqmm copper conductor multi stranded for power points on independent board.

Supply and fix in repairs Integral sleek extruded polycarbonate batten ceiling suspended type for LED tube light with white acrylic cover suitable for upto 1x22 watts LED tube light. Make Havells Cat No.REGALBATTEN8UPTO1X22WDSBSWH or equivalent in Bajaj/CG

Supply and fix in repairs LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed. Make : Make Havells Cat No.CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make in Bajaj/Crompton Greaves

Supply & fix ceiling fan 1200 mm sweep including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective ceiling fan and depositing the same to MES store yard complete all as specified and directed. Make Crompton Greaves Model No Briz Air or equivlent make in Baja/Khaitan

Supply & Fix in exhaust fan of 300mm sweep after assembling at site including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective exhaust fan and depositing the same to MES store yard complete all as specified and directed

Supply & fixing in repairs LED 70 Watt building light luminaire, LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.making necessary connection of Make Havells cat No..ENDURAPEARLPLUSSL70WLED757SASYTOPC or equivalent make in Philips / Havells / C&S

Supply & Fixing in reapir Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specefied and directed

Supply and fix in repairs switch piano 5 Amps one way flush type, matching with existing make, ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 2 in 1, 3 pin, 5 Amps flush type, matching with existing make ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 5 Amps/16 Amp, 5 in 1 flush type, multi purpose, matching with existing make ISI marked, all as specified and directed.

Supply & fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 240 volts 20 Amps all as specified and directed.

M&L in repair for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 2.50 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. [Note :- Necessary cutting and chasing shall be measured and paid separatly under relevant items of this schedule]

M&L in repair for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. [Note :- Necessary cutting and chasing shall be measured and paid separatly under relevant items of this schedule]

Supply and fixing sheet metal enclosure MCB DB SPN 8 ways double door type with suitable bus bar complete all as specified and directed.

Supply & fixing of sheet metal enclosure vertical type MCB DB TPN 4 ways double door type including 100 Amps MCCB ,25 KA incomer with suitable bus bar all as specified and directed .

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 5 to 32 Amps current rating complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN upto 32 Amps current rating complete with connection testing and commissioning.

Supply only lamp 18 watts

Supply & fix exhaust fan of size 380 mm sweep, metal body including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective exhaust fan and depositing the same to MES store yard complete all as specified and directed. MAKE: Usha or equivalent make in Bajaj/Crompton Greaves

Supply and fix in repairs socket outlet 2 in 1, 3 pin, 5A, matching with existing make, ISI marked, all as specified and directed.

Supply & Fix wall mounted fan of 450 mm sweep high speed after assembling at site including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective wall mounted fan and depositing the same to MES store yard complete all as specified and directed. Make Havells Model No. V3

Supply and fixing in repair sheet metal enclosure MCB DB TPN 6 ways double door type with suitable bus bar complete all as specified and directed.

Supply and fixing amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 to 100 Amps current rating complete with connection testing and commissioning.

S & F in repairs energy saving environment friendly 90 watt LED IP65 industrial low high bay luminaire complete all as specified and directed Make:- Bajaj, cat part No. BRTFG90WLEDCR or equivalent in Havells/Crompton Greaves/Philips.

KVL CONSTRUCTION

K.G.SHANKER

S M Shetty

LEKSHMI ENGINEERS

SIRI SALES AND SERVICES

Bidder Name

LEKSHMI ENGINEERS

K.G.SHANKER

KVL CONSTRUCTION

sohan construction

S M Shetty

SIRI SALES AND SERVICES