Construction of Vehicle Shed in the plot of Lumding Municipal Board at Pub Lumding Veterinary Hospital road in Ward no-11,under 15th FC untied 1st installment for the year 2020-21

Amount

EARTH WORK

2.6.1>Earth work in excavation by mechanical means(Hydraulic excavator)/manual means… All kinds of soil

2.25A>Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km …

PRE CONSTRUCTION ANTI - TERMITE TREATMENT

2.34.1>Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

4.1.5>PLAIN CEMENT CONCRETE WORKS Providing and laying in position cement concrete of specified grade…. 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

5.1.2>REINFORCED CEMENT CONCRETE WORKS(UP TO PLINTH) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement … 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

5.2.2>REINFORCED CEMENT CONCRETE WORKS(ABOVE PLINTH) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc…… 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1>Foundations, footings, bases of columns, etc. for mass concrete

5.9.6>Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5>Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.3>Suspended floors, roofs, landings, balconies and access platform

5.9.7>Stairs, (excluding landings) except spiral-staircases

BRICK WORKS

6.1.1>Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

6.13.2>Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

WALL TILES

8.31>Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size …….

FLOORING

11.5>62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)……..

11.41A.3.1>Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer……. Glazed Vitrified tiles Matt/Antiskid finish of size. (Size of Tile 600 x 600 mm)

PLASTERING

13.1.1>CEMENT PLASTERING (In Fine Sand) 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

HAND RAILING

10.28>Providing and fixing stainless steel( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete……….

PAINTING

13.8>Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.82.2>Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

REINFORCEMENT

5.22.6/ 5.22A6>Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding…….. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Electrification

Internal electrification of total civil works

External electrification of total civil works

Swapan Chandra Dey (BID ID -260551)