Supply, Installation,Testing and Commissioning of factory assembled and factory tested, compact, close coupled, Diesel Engine Alternator set capable of delivering not less than 750 KVA, 600KW at typical site conditions ----------------- CPCB norms published vide Gazette of India notification no- 595 dated. 11th December 2013 of Ministry of Environment and Forests, New Delhi as amended from time to time------------------------ATC as required . 1.1 ENGINE- The Diesel Engine shall be multi cylinder--------- below mentioned alternator . 1.2 ALTERNATOR- The alternator shall be copper wound, self excited --------------- specifications attached. 1.3 STANDARD MANUAL CONTROL PANEL- The STANDARD control panel shall be fabricated from 14, 16 gauge -----------------------of bids. 1.4 POWER AND CONTROL CABLES- Supply and laying of 4 runs of 3� X 300sqmm XLPE insulated Aluminium -----------------Distribution panel, MCBDB etc. as required. 1.5 ELECTRICAL EARTHINGS- Providing 4nos of Copper Plate Earthings -------------------etc. as required. 1.6 INSPECTION AND TESTING OF THE DG SET AT FACTORY, MANUFACTURERS PREMISES- Inspection and testing ------------------------------- borne by the Buyer Department. 1.7 INSTALLATION, TESTING, COMMISSIONING AND ACCEPTANCE TESTING OF THE DG SET- Installation of the above 750 KVA DG set with acoustic enclosure and Control panel and Circuit Breaker panel ---------specifications attached. THE DETAILED DESCRIPTION OF THE COMPLETE DG SET IS PROVIDED IN ITEM NO 1 OF UNPRICED SCHEDULE IN CLAUSE 37 OF SECTION 3 OF ATC . THE BIDDER IS ADVISED TO READ COMPLETE ITEM AS PER ABOVE BEFORE QUOTING THE RATES . | PURNA CHANDRA PATRA 751022,ELECTRICALOFFICE DOOR SANHAR BHAW AN 7 RQR+CGQ, UNIT-9,near Sahidnagar, UNIT-9, Bhubaneswar, Odisha 751022 |