REPLACEMENT OF DAMAGED CASING PIPE, CUBICAL BOX, GI PIPE, REMOVAL OF SILT, And FLUSHING WORK OF BORE WELL AND SINKING OF BOREWELL TO GROUND LEVEL UNDER TUMKUR CITY CORPORATION LIMITS

REPLACEMENT OF DAMAGED CASING PIPE, CUBICAL BOX, GI PIPE, REMOVAL OF SILT, And FLUSHING WORK OF BORE WELL AND SINKING OF BOREWELL TO GROUND LEVEL UNDER TUMKUR CITY CORPORATION LIMITS

Logging / scanning of borewell at any depth continuously with the help of Logger unit including the cost of transportation charges, crew charges, stationery charges and cost of consumables etc

Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours continuously with air compressor...

Labour charges for Lifting of non functioning submersible pump set alongwith cable and GI pipes (Each length = 6m) ). for 50 mm

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x4 m2

Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and re...

Lifting of struck up submersible pump set. above 300 ft

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply anderection of two pair of supporting clamps, bore well caps,...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

PVC pipes of 6 Kg per cm2 for 160mm(3.923)

Aligment of hydraulic borewll lifting vehicle. Repair of dents or,folds present in existing casing pipe with the help of casing cutter hydraulic machine inorder to place pvc casing (cost of pvc pipe e...

Positioning of the rig for retrival vechical of failed borewells for Removing of old damaged ms casing pipe and erection of new casing pipe (cost of new casing not included)of dia 150mm to175mm includ...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any.For 50 mm dia GI collar:

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.For 50 mm dia GI BEND

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 50mm

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.Consider 35% of item concrete rate for drain wal...

Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. Consider 5% of item concrete rate for drain bed...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...