URGENT REPAIR TO BUILDING NO P-133 AT NEW KULWANT SINGH ENCLAVE UNDER GE N PATIALA

Amount

Taking down cement plaster of any description,any thickness from external / internal surface of walls/soffits etc. including raking out joints,hacking for keys, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rendering 15mm thick in two layers (10mm and 5mm respectively) on fair faces of brick work or concrete surfaces on chajjas/parapet walls etc in cement mortar 1:4, mixed with liquid water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed. Note : Liquid WPC and will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and as directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cemet mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick on concrete surfaces as on ceilings in cemet mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder etc complete all as specified and as directed.

Material and labour for Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surface of walls / RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony etc and applying ready made wall care putty1.5 mm to 2.00 mm thick in two or more layers for levelling the surface and rubbing the levelled surface using sand papers to achieve smooth surfaces to the entire stasifaction of Engineer-in-charge for internal and external finishes complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surface of walls and applying two coats of oil bound distamper white or tinted over and including a coat of primer complete all as specified and as directed.

Material & Labour for preparation of unplastered surface of walls and applying two or more coats of wheather proof paint having VOC less than 50 gm/liter and uv resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed.

Material and labour for preparation of plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description,over 10 cm width or girth,not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description,over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.

Material and labour for repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion, and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U shape clamps made out of MS bars 8mm dia @ 150mm c/c inserting in concrete block, stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick rendering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed.

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in Cement mortar1:6 complete all as specified and as directed.

Demolition of cement concrete ( un-reinforced) in ground floors and pavings n.exc15cm thickness ( below or above ground level) complete all as specified and as directed.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust,etc and brushing the cleaned surface with neat cement slurry @ 3.0 kg of cement per Sqm complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as spcified and as directed

Material and labour for Non-skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per Srl Item No 20 here-in-before, but as in skirting 150mm height laid over and including 10mm thick rendering in Cement mortar1:3 set and jointed in neat cement slurry and pointed with white or coloured cement to match, Skirting shall be same finish as of flooring and flush with plaster and at all edges properly mitered complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surface of size 450x350x7mm thick laid over and including10mm thick rendering cement mortar1:3, set and jointed in neat cement and pointed in white or coloured cement to match. The dado shall be of same finish as of flooring and flush with plaster and at all edges properly mitered complete all as specified and as directed..

Material and labour for Non skid ceramic joint free coloured tiles 7 to 8mm thick ( square/ rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm , in floors etc, laid over and including 15mm thick bedding layer in cement mortar 1:4,set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed..

Material and labour for for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Material and labour for 15 to 18 mm thick Baroda Green marble, machine cut as in shelves / steps / cills/ jambs /skirting / border only in tile flooring and the like works and flooring etc, including bull nose the front length,set and jointed in cement slurry over and including 15mm thick rendering/ screed bed in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing,cutting and mirror type granite polishing complete all as specified and as directed. Note: Single piece should be used in steps/cills/jambs/shelves.

Material and labour for machine cut Kota stone slab flooring 18-20 mm thick laid over and including 15 mm thick screed bed in cement mortar 1:3 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and as directed.

Supply and fixing stainless steel Harrison rails 20mm dia with fixing brackets,stops, finial (02 Nos for each end of curtain rod),rollers etc complete all as specified and as directed.

Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm each including cutting holes for hold fast block for new frame and making good to match the existing surface complete all as specified and as directed.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and as directed.

Supply and fixing factory made Solid PVC Moulded Door Shutters 28 to 30mm thick (stile:),( brown/ coffe colour) with homogeneous fine cellular structure having density of 550 KG/Cum with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm each including cutting holes for hold fast block for new frame and making good to match the existing surface complete all as specified and as directed.

Supply and fixing Pressed steel frames of size125x60mm made out of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc,complete as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-0 using 12.50 mm graded stone aggregates asi filling back of pressed steel frame and as in hold fasts complete as specified and as directed.

Supply and fixing Pressed steel frames of size105x60mm made out of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified and as directed.

Supply and fixing factory made 35mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified and as directed.

Supply and fixing factory made 35mm thick glazed and skelton shutters of 2nd class hard wood open rebated and prepared to recieve glass, gauze etc divided into square (without sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-1 section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing Butt hinges,cast brass 100 mm size,with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

Supply and fixing Aluminium handles of size125mm, cast type, anodised complete all as specified and as directed.

Supply and fixing Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed

Supply and fixing Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and as directed.

Supply and fixing 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate including necessary welding to chowklhats complete all as specified and as directed.

Supply and fixing Floor door stopper overall length of cover plate 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and as directed.

Supply and fixing Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc including 8mm square gaurd bars complete all as shown on drawing No TD-191 (R) sheet 1/4 to 4/4 as specified and as directed.

Supply and fixing Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

Supply and fixing mild steel Framed work such as Guard bar/grill for steel ventilator welded to window frame or fixed independantly, gratings, etc. with ends of bars shouldered and/or riveted , or forged into spikes: framed guard bars: barred iron doors: ladders: framed balusters : walk ways : railings : framework of water tanks and simillar work conforming to Fe.290, Gde-E-165 complete all as specified and directed.

Supply and fixing 4mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fixing 3 mm figured glass sheet ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash basin, white, flat back, size 550x400 mm excluding taps,chain and plug and porcelain stopper including brackets,waste pipe etc ,cutting for and pinning in ends of bracketes or erecting stand complete all as specified and as directed

Supply and fixing in repair vitreous china premium/1st quality wash down water closet pan (pedestal pattern/ EWC) with S/P trap white colour including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe with and including flush pipe plastic seat cover closed pattern with flat bottom and cover and mild steel chromium plated or alumininised hinges devices including all necessary accessories like rag bolts,gel gasket,packing etc for fixing complete all as specified and as directed.

Supply and fixing CP Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect all as specified and as directed.

Supply and fixing health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making all connection and fixed in position complete all as specififed and as directed .

Supply and fixing Cast iron Traps ‘P’ or ‘S’, for 100 mm bore cast iron pipe complete all as specified and as directed.

Supply and fixing in repair PVC flushing cistern low level10 ltr capacity, white, with inlet,ball valve ,float and handle, PVC flush pipe of reqd length including connection complete all as specified and as directed.

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed

Supplying and fixing mild steel galvanised 15 mm bore Tubes, 'medium grade',with all fittings fixed to walls and ceiling or laid in floors complete all as specified and as directed

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed

Supplying and fixing mild steel galvanised 20 mm boreTubes, 'medium grade',with all fittings fixed to walls and ceiling complete all as specified and as directed

Supply and fixing Brass chromium plated CP shower rose 125mm size with or without swivel joint and fixing to steel pipe complete all as specified and as directed

Supply and fix in repair Brass chromium plated towel rail 20mm dia,D type, 60 cm long between flanges and including all accessories for fixing complete all as specified and as directed.

Supply and fixing Bib taps cast copper alloy chromium plated fency type, with crutch or butter fly handle, screwed down, screwed for 15mm bore dia iron pipe or for brass ferrule and fixed in position complete all as specified and as directed.

Supply and fixing in repair Stop valves cast copper alloy, fancy type, Chromium plated with long shank and cup ( concealed type ), screwed down, high pressure, with crutch or butterfly handle screwed both ends for 15mm bore dia iron pipe or union and fixed complete all as specified and as directed.

Supply and fixing in repair Pillar taps fancy type cast copper alloy, with capstan heads chromium plated, screwed down high ressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for 15mm bore dia iron pipe and fixed complete all as specified and as directed

Supply and fixing Angular Stop Cock cast copper alloy with wall flange,fency type chromium plated screwed down,high pressure, screwed one end for 15mm bore iron pipe or for union and fixed complete all as specified and asdirected.

Supply and fixing stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and as directed .

Supply and fixing towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 90gms) complete all as specified and as directed .

Supply and fixing 200 mm size corner acrylic glass shelf with ss railing for soap dish and for placing other bath itemse, such as paste, shampoo, hai roil etc and fixed to walls with plug and brass chromium plated screws complete all as specified and as directed

Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and as directed.

Supply and fixing tripple layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) white colour 500 Ltrs capacity hoisted and fixed in position all as specified and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and as directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore iron pipe and fixed in repair complete all as specified and as directed.

Supply and fixing PVC connections 15mm size of length 450mm complete all as specified and as directed.

Dismantling of cast iron/PVC soil waste & vent pipes of any dia including all fittings etc complete all as specified and as directed.

Supply and fixing Cast iron soil, waste and vent pipe,100mm bore, Spun pipe in any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc.and making necessary connections complete all as specified and as directed.

Supply and fixing Cast iron soil, waste and vent pipe100mm bore, spun pipe in any length, with or without ears, with cement joints,laid in trenches or in floors and jointed with lead joint complete all as specified and as directed.

supply and fixing Cast iron soil, waste and vent pipe, 75mm bore, spun pipe in any length, with or without ears,laid in trenches or in floors and jointed with lead joint complete all as specified and as directed.

Supply and fixing cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door and jointed with lead joint complete all as specified and as directed.

Supply and fixing in repair Cast iron Cowl for 100 mm bore pipe complete all as specified and as directed.

Supply and fixing Cast iron bends (any radius) duck foot or heel rest for 75 mm bore cast iron pipe complete all as specified and as directed.

Supply and fixing for Cast iron bends(any radius) duck foot or heel rest for 100 mm bore cast iron pipe complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes110 mm borefor rain water, single socketed in any length with rubber ring joints fixed to walls with MS flat iron clamps ,nut, and bolts etc complete all as specified and as directed. Note : MS Clamps shall be measured and paid separately in respective items of this schedule.

Supply and fixing PVC (SWR) bends of any radius for 110 mm bore pipe complete all as specified and as directed.

Supply and fixing PVC (SWR) junction single ( 'single T') for 110 mm bore pipe complete all as specified and as directed.

Supply and fixing stack clamps made out 50x5 mm thick flat iron and 16 mm dia iron stay for 100 mm bore pipes including bolts and nuts and securing ends of stay to wall complete all as specified and as directed

Supply and fixing stack clamps made out 50x5 mm thick flat iron and 16 mm dia iron stay for 75 mm bore pipes including bolts and nuts and securing ends of stay to wall complete all as specified and as directed

Supply and fixing Salt-glazed stoneware gully traps,150x150mm size,square or round mouthed, type 'P' or 'S' including CI grating complete all as specified and as directed. .

Supply and fixing Cast iron floor trap dia of outlet 100 mm with grating including jointing to waste pipe fixd in cement concrete type B-1 1:2:4 complete all as specified and as directed.

Material and labour for 50 mm thick Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in plinth protection/ floor, surfaces finished even and smooth without using extra cement including provision of construction joints complete all as specified and as directed.

Supplying and fixing in repair mild steel galvanised 50 mm boreTubes, 'medium grade',with all fittings fixed to walls and ceiling or laid in floors as in spouts complete all as specified and as directed

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and as directed.

Demolition of mud phuska in roof any thickness including plastering and leeping ( whether full thickness removed or part thereof) complete all as specified and as directed.

Material and labour for Cutting grooves in brick wall,50mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Material and labour for PCC 1:3:6, type C-0 using 12.5mm graded stone aggregate as in padding over roof, minimum thickness at khurra 25mm and maintain a slope of 1:100 complete all as specified and as directed.

Material and labour for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt.not less than 150 gms/sqm) laid over and including bitumen primer applied @ 0.30 kg/sqm by forced application complete all as specified and as directed. Note:- The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only .

Material and labour for cement concrete tiles ISI marked of size 25cm x 25cm x 22 mm thick with grey cement and no pigment, machine pressed laid over and including 15 mm thick screed bed in cement mortar (1:3) set jointed and pointed in neat cement slurry and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound as per mnufacturer;s instructions over roof surfaces complete all as specified and as directed .Note: Liquid WPC will be measured and paid separately

Material and labour for cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregates as in roof kerb, benching, mud stops, steps, coping and the like slightly rounded or chamfered on the edges complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes, laying of cables etc & getting out as in soft /loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed.

Removing the excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Material and labour for cement concrete1:3:6 type C-2 using 40 mm graded stone aggregate for bed to drain pipe 150mm bore dia including packing under and haunching against side of pipe after they are laid and tested complete all as specified and as directed.

Material and labour for laying 150 mm bore reinforced cement concrete pipes,class NP-2, laid and jointed in trenches complete with collar complete all as specified and as directed.

Cutting into existing manholes for connecting 150 mm new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.

Material and labour for Precast cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate as in cover slabs for manholes etc. including necessary formwork and set in CM (1:4) complete all as specified and as directed. Note :- Reinforcement shall be measured and paid separately under appropriate items of this schedule.

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2 mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. complete as per manufacturer specifications and as directed.

Supply and apply cementitious coating for corrosion protection having a cement base polymer modified rebar corrosion protection system by applying the first coat approx 1mm thick layer of product carbonation resistance 2mm of sikatop ArmatecR -108 or equivalent as specified corresponds to 20 mm of normal mortar;bond strength 1N/mm2 according to ASTM C 882-78 applying @ 4kg/m2 for two coats onto the prepared reinforcing steel with a medium-stiff brush.it is unavoidable that specified product will also be applied in the same way after a waiting time of 2-3 hours (+20C) complete all as per manufacturers instructions and all as specified and as directed. Note: The application of cementitious coating for corrosion protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and as directed.

Material and labour for Proving ,mixing & applying two components Epoxy resin concrete bonding coat on prepared RCC surfaces as per manufacturers apecification incl prepration of surface by chipping and throughly cleaning of surface complete wherever required and as per directions of Engineer-in-charge. Consumption: o.5 kg/m2 complete all as per manufacturers instructions and all as specified. Product requirements : complies with ASTM C 881 Type II Grade 2 class B+C. Note: The application of epoxy bonding primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and as directed.

Supply and apply a pre-batched one component polymer modifies cementitious patch repair mortar in 25mm thickness. Yield:approx 0.84 ltr/kg.System requirements:compressive strength =50 N/mm2 (28 days) according to ASTM C 109 : flexural strength = 3 N/mm2 (7 days) according to ASTM C 293-79 consumption of 2.1 kg/sqm/mm complete all as per manufacturers instructions and as specified and as directed. Note: The applicator of polymer repair mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

Material and labour for PVC Celuka ply 18 mm thick ( minimum density 600 Kg / Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement / adhesive to make kitchen / bed rooms cabinet sides top and bottom and shelves inside the cabinets complete all as specified and as directed

Material and labour for PVC Celuka ply 18 mm thick (minimum density 600 Kg/Cum) of single side rigid lamination of approved colour and other side plain white colour fixed with stainless steel screws and solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete all as specified and directed.

Material and labour for 12 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of fixed with Stainless steel screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and as directed.

supply and fixing Auto closing hinges of size 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete complete all as specified and directed by Engineer-in-Charge.

supply and fixing Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity minimum 50 kgs complete all as specified and as directed.

supply and fixing D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished and fixed in position complete all as specified and as directed.

supply and fixing Stainless Steel 304 grade wire Basket (average weight 2.5 to 4 Kg. per basket) of pull out type like plain / cup & saucer /bottle / multi purpose/ 2-3 shelf baskets etc. for kitchens of required size fixed in position complete all as specified and directed by Engineer-in-Charge.

supply and fixing Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality fixed in position complete all as specified and as directed.

Material and labour for built in cup boards with pressed steel frame of size 75 x 45 x 1.25mm thick and shutter of 1.00 mm thick MS sheet including spray painting 2 coats over a coat of red-oxide primer on steel shurfaces all around all shown on drawing No TD-178 sheet 2/3 to 3/3 dated 12 May 2001 (overall external size of cup board shutter including frame shall be taken into consideration for the pupose of measurement) including One No hanging rod of CP steel 20mm bore with brackets & two Nos peg set of three pegs each fixed inside the shutter complete fixed in repairs i.e, including taking down and removal of old unserviceable wooden or steel built-in-cupboards including frame from site complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for 18- 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like laid over and including screed bed in cement mortar (1:4) and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for providing and fixing stainless steel (Grade S-304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

Supply and fixing framed work as in door or gates of angle or other section with gusset plates,rails,braces etc complete conforming to 410W(Gde E-250) quality-B including fixing of holdfast and hinges, or steel hanging door fittings, fastening and fixing complete all as specified and as directed.

Demolition of reinforced cement concrete of any description in any position such as in roof, floors (other than ground floor), beams ,staircase, landing, chajja's and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slab s, floor slabs,landings and similar works n.exc. 200 mm thick for fair finished surfaces of concrete complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surface of concrete complete all as specified and as directed.

Material and labour for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregates as in slab supported on wall,beams and columns, in floors, roofs, landings,balconies, shelves and the like complete all as specified and as directed.

Material and labour for mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and as directed.

Material and labour for mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding withand including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and as directed.

Material and labour for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS railing/angle iron Steel bars gusset plate etc complete all as specified & directed complete.

Dismantling of Asbestose cement (corrugated ,semicorrugated etc) sheets in roof coverings all as specified and as directed

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed with self tapping screws all as specified and as directed.

Supply and fixing galvanised, mild steel plain sheet 1.25 mm thick black sheet for steel gates and similar work, cut to size, hole punched; including round head screws, cleats , nails or rivets and fixed to wooden or steel frame with 40 mm lap joints with rivited or welded seams,including bending or turning up, mitered angles etc as required complete all as specified and directed.

Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe and fixed (Minimum weight 20mm - 210gms) complete all as specified and as directed.

Supply and fixing GI wire netting 0.90 mm dia and 12 mm mesh lathing to metal studding in walls,ceilings, stanchions, beams, RCC chajjas/Facias etc,including laps,cutting and waste complete all as specified and as directed.

Supply and fixing sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fixing in repairs stainless steel plate rack of size 30"x24"x10" as per trade pattern fabricated out of 0.50 mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings etc fixed on wall with plastic gutties and stainless steel screws of suitable size complete all as specified and as directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc.complete all as specified and as directed

Supply and fixing Mild Steel chromium plated peg set of five fixed to wall with plastic gutties and steels screws complete all as specified and as directed

Material and labour for carrying out water proofing treatment of sunken floor complete all as specified as under:(i) The concrete / wall surface shall be cleared thoroughly of all laitance,loose particles,dust, grease etc and any friable and unsound area which shall be chipped,cleaned and thereafter pre-wetted to a satured surface dried condition. (ii) In case of pot holes/superficial cracks,the same shall be repaired with polymer modified mortar using URP as admixture @ 10% of cement content. (iii) The polymer modified mortar using URP as admixture @10% of cement content shall also be applied on vertical surfaces after removing of plaster upto 60 cm height.(iv) The surface thus prepared shall be coated by applying 2 coats of Dr Fixit Hydrochem super in the sunken areas and extending it upto 150 mm above the finished floor level.This includes layer of a 150 mm wide strip of an open woven glass fiber mesh over the PCC benching (Gole) on the 1st coat whille it is still wet.(v) Rendering 15 mm thick in CM 1:4 mixed with integral water proofing compound 1 W+ @ 200 ml per bag of cement complete all as specified and as directed.

Material and labour for plain cement concrete 1:7:12 type E-2 using 40mm graded Brick aggregate as in filling of sunken portion complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in Hard/dense soil complete all as specified and directed.

Material and labour for 75mm thick cement concree 1:3:6 type C-2 using 40mm graded stone agrregate as in sub base of floors complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor,ceiling etc comlete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including new PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated into metal flush box of any module for mounting of modular type cover plates/frame/ switches/sockets/regulators etc including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed. Notes: (i) Metal flush box and modular Top plate /frame / switches / sockets / regulators etc shall be measured and paid separately under respctive items of this schedule (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) The Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

Material and labour for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way switches including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated into metal flush box of any module for mounting of modular type cover plates/frame / switches/ sockets / regulators etc including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by two switches complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed Notes: (i) Metal flush box and modular Top plate /frame / switches / sockets / regulators/bell push etc shall be measured and paid separately under respctive items of this schedule (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) The Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

All as per Sl item No 145 here-in before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and as directed.

All as per Sl item No 145 here-in before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and as directed.

All as per item No.145 here-in before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor including 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board complete all as specified and as directed.

Supply and fixing Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed.

Supply and fixing Modular switch 2 way, 6 Amps, 1 module, 230 volts complete all as specified.

Supply and fixing Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified and as directed.

Supply and fixing Modular bell push switch 1 way, 6 Amps, 1 module complete all as specified and as directed.

Supply and fixing Call bell ding dong AC 230 volt single pole ccomplete all as specified and as directed.

Supply and fixing Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified and as directed.

Supply and fixing Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

Supply and fixing Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.

Supply and fixing ceiling rose,3 phase/PVC/ polycarbonate, isolated boday complete all as specified and as directed.

Supply and fixing Lamp holder including LED bulb 9 W and flexible wire 0.5 Sqmm copper cable complete all as specified and as directed.

Supply and fixing in replacement of unsv bldg security light with new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket of 20 mm bore light grade GI pipe bend to shape, MS clamp fabricated out of 50x5 mm flat iron of required size and PVC1.5 Sqmm twin core cable from ceiling rose to light fittings complete all as specified and as directed.

Supply and fixing in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable complete all as specified and as directed.

Material and labour for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth Including taking out/down existing unserviceable sub main wiring all as specified and directed. Notes:- (A) 2(two) Runs of 6.00 Sqmm Copper conductor cable,1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit. (B) Rate quoted for this items shall be inclusive of the cost of following:- (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth.(iii) taking out/down existing unserviceable sub main wiring.

Supply and fixing in replacement of MCCB, 4 Pole, 100 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 54 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and as directed. Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size.

Supply and fixing in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified and as directed.

Supply and fixing in replacement of MCB , SPN B curve, 240 Volts ,32-40 amp for fixing in DBs including proper thimble connections complete all as specified and as directed.

Supply and fixing in replacement of MCB, single pole C curve 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and as directed.

Material and labour for replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497 complete all as specified and as directed. .

Supply and fixing Tube light fitting Self Ballasted LED Batten, Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity, 20 watt,4 ft long including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed.

Supply and fixing elegatly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existing complete all as specified and as directed.

Supply and fixing Exhaust fan AC single phase 230/240 V of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louvers and make the surface good to match the existing surface complete all as specified and as directed.

Supply and fixing Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body,high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louvers and make the surface good to match the existing surface complete all as specified and as directed.

Supply and fixing/laying XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core and connection with appropriate size of Al thimble including taking out/down unsv cable complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and as directed.

Returning filling in including spreading, levelling and well ramming in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and as directed..

Material and labour for sand cushioning for protection of underground cable using dry fine river sand laid in trenches 8 cm before laying the cable and 15 cm after laying the cable including spreading, leveling, well ramming completed all as specified and as directed.Note:- Only punned depth will be measured for payment

Material and labour for Cutting the hardstanding, floor/wall of any thickness, description and in any location for laying of cable including making the surface good using cement concrete to match with the existing suface complete all as specified and as directed.

Material and labour for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and as directed. Note: GI pipe shall be measured and paid seperately under relevant item of this schedule.

Supplying and laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as specified and as directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor,along the wall or along the pole complete all as specified and directed.

Taking down and refixing of ceiling fan of any sweep after overhauling, replacement of capacitor and capacitor stand,cleaning and painting with spray painting machine using synthetic enamel paint and writing serial No/MES NO with synthetic enamel paint of coluor and size of words as directed by Enginner-in-charge complete all as specified and as directed. Note:- The cost of supply & fixing of celing fan box round cover plate is included in the unit rate quoted by contractor.

Taking down and refixing of ceiling fan any sweep after rewinding ,replacement of bearing, capacitor and capacitor stand,cleaning and painting with spray painting machine using synthetic enamel paint and writing serial No/MES NO with synthetic enamel paint of coluor and size of words as directed by Enginner-in-charge complete all as specified and as directed.Note:- The cost of supply & fixing of celing fan box round cover plate is included in the unit rate quoted by contractor.

supply and fixing PVC Meter Box of (250mm x 220 mm x 140 mm) size for single phase LT meter. with front openable door fixed with transparent glass for visibility of meter reading fixed on wall with suitable arrangemnets.and making good the disturbed surface of wall to match the existing surface.NOTE:-To fix the meter box required disconnecting and refixing of connections of sub main shall be included in quoted rate.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

Material and labour for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire including taking down the existing unsv sub main wiring complete all as specified and as directed. Notes :- (1). 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqmm Copper conductor Earth wire shall be measured as one unit) (2) Rate quoted for this items shall be inclusive of the cost of:- (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

Supply and fixing Electric Water heater (Geyser) storage type of capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum & high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and as dirceted.

Material and labour for making hole in brick wall built in cement mortar of suitable size for exhaust fan of 250/300 mm sweep including grouting nuts etc and making good the surface to match the existing surface complete all as specified and as directed. Note:- The Cost of cement work, plastering,painting etc shall included in the quoted rate of this item.

Supply and fixing metal flush box of 1/2 module complete all as specified and as directed.

Supply and fixing metal flush box of 3 module complete all as specified and as directed.

Supply and fixing metal flush box of 6 module complete all as specified and as directed.

Supply and fixing metal flush box of 8 module complete all as specified and directed.

Supply and fixing modular cover plate of 1 module with frame complete all as specified and directed.

Supply and fixing modular cover plate of 2 module with frame complete all as specified and as directed.

Supply and fixing modular cover plate of 3 module with frame complete all as specified and as directed.

Supply and fixing modular cover plate of 6 module with frame complete all as specified and as directed.

Supply and fixing modular cover plate of 8 module with frame complete all as specified and as directed.

SWAMI ENGINEERS (BID ID -3380241)

Buttar Construction Co. (BID ID -3387274)

ANIL KUMAR AND CO (BID ID -3387544)

M/S RAJ KUMAR GUPTA (BID ID -3386892)

Arneja Builders (BID ID -3386389)

Jawandha Enterprises (BID ID -3387499)